Best Gas Spring End Fittings

EXCELFU Safety-Shield Gas Appliance Line Flexible Dryer Gas Hose Connector Kit - 5/8 In. OD (1/2 In. ID) 1/2 In. MIP X 1/2 In. MIP X 3/4 In. MIP X 48 In. Length Yellow Coated

  • Adapter Included 2 Pcs 5/8 In.OD Flare x 1/2 In. MIP (Tapped 3/8 In. FIP) and 2 Pcs 5/8 In.OD Flare X 3/4 In. MIP (Tapped 1/2 In. FIP).
  • This gas appliance connector kit are designed for Ranges, Stoves, Furnaces or Boilers.
  • 304 Stainless steel flexible tubing with plated steel end fittings capacity 106,000 BTU.
  • 48 inch long stainless steel corrugated gas range and dryer connector kit are perfect for indoor or outdoor use.
  • This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
Check Stock

Propane Torch Hose Weed Burner Hose Weed Torch Hose Heating Torch Extension Hose (6.5 Feet)

  • -Note: POL connection propane tank. Thread diameter at the other end: 5 / 8 (reverse thread / left-hand thread).
  • -Note: This hose for propane heating torches only..
  • -Connection: Ball seat reverse internal thread swivel fitting with leather ring to prevent gas leakage..
  • -Specification: rubber& solid brass, 6.5 feet-long, long-lasting rubber and solid brass fittings. Working Pressure: 0-350 PSI.
  • -CSA certification ensures excellent sealing quality..
Check Stock

MSA 10089321 Calibration Assembly for ALTAIR 4X Multi-Gas Detectors, Includes: Cap, Tube, and Connector, Ensure Detector Stays Calibrated for Maximum Accuracy

  • PEN Style Combustible Gas Leak Detector with Gooseneck.
  • 40ppm methane sensitivity and bearing defects.
  • Trace natural gas lines and fittings for leaks frame to failure.
  • Test propane tanks, fittings, lines, and heaters for leaks.
Check Stock

Event: A Novel (Event Group Thrillers Book 1)

  • Ideal for Commercial and Recreational Use.
  • Heavy Duty Waterproof 180 Gram Polyethylene Woven Fabric Canopy and Sidewalls.
  • 1.5" Galvanized Steel Tube Frame w/Spring Loaded Locking Balls & High Strength Galvanized Metal Joint fittings.
  • Removable Sidewalls With Beautiful Windows w/Lattice.
  • and End Walls with Zippers for Doorways. UV Protection - Blocks 90% of sun's rays..
  • This tent is NOT flame resistant and does NOT include any fire certificates..
Check Stock

iMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System

  • 【Great Value】：Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
  • 【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
  • 【BARBED DESIGN】：Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
  • 【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
  • 【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..
Check Stock

TAISHER 2PCS Forging of 304 Stainless Steel Compression Tube Pipe Fitting Connector 1/4 Tube OD x 1/4 NPT Male Straight Adapter

  • Widely used ——This pipe fitting is suitable for fuel/air/liquid/oil/gas/vacuum pipelines, with good air tightness, pressure resistance, and not easy to trip.
  • Product Material —— Forging of 304 stainless steel strength and resistance to corrosion..
  • Working Temperature —— Temperature range from -868 to 1472 degrees F/-500 to 800 degrees c..
  • Maximum Pressure —— Maximum working pressure is 2800PSI..
  • Function —— Fittings for connecting and extending stainless steel, copper, rigid and semi-rigid plastic pipes of the same diameter, hex nut construction creates a tight seal, one end is connected to the pipe and the other end is an NPT male connector.NPT thread size is not the actual diameter, it is only the nominal pipe size..
Check Stock

DOZYANT 24 Feet 1/2 ID Natural Gas Hose Propane Gas Grill Quick Connect/Disconnect Hose Assembly with 3/8 Female Flare by 1/2 Male Flare Adapter for Outdoor NG/Propane Appliance

  • 1/2" ID natural gas hose with 1/2" Quick Disconnect Plug Kit x 1/2" Female Flare Fittings. Use to convert outdoor appliance to natural gas supply....
  • Comes with 1/2" Male Flare to 3/8" Female Flare Brass fittings, to convert your 3/8" connector propane/natural gas grill.
  • Perfect for hooking up weber grill, fire pit, patio heater, pizza oven and portable generator.
  • 24-foot durable rubber hose, flexible enough to move your gas device as needed. Quick disconnect feature allow to swiftly disconnect hose.
  • Supplies up to 100K BTU/Hr, provide adequate gas flow for 30-in and larger grills.
Check Stock

MADJAX Heavy Duty Lift Kit for Club Car DS Golf Cart Models | 6 Inch A-Arm Lift Kit | Compatible with 1982-2003.5 Models with Metal Dust Covers

  • [A Better Ride] Oversized 5/8" heim joints increase suspension travel providing a smoother off road experience | Recommended up to 23" tire size.
  • [Innovative Design] Bolt-in steel lower A-arm design provides 6" of lift with debris louvers.
  • [Easy Installation] No-cut, no-weld design makes for the fastest install possible | Easy to follow updated instructions included.
  • [Hassle-Free Maintenance] Allows camber and toe front end alignment, and comes with grease fittings for easy maintenance.
  • [Compatibility Note] Fits 1982-2003.5 Electric and 1997-2003.5 Gas DS Models.
  • DOES NOT FIT 1982-1996 Gas DS or Models with Front Mechanical Brakes.
Check Stock

Nilight 4-Way Flat to 7-Way Round RV Blade Trailer Adapter Reverse Plug with mounting Bracket, 2 Years Warranty

  • This adapter converts 4 way flat vehicle end to 7 way blade trailer end, makes tight connection between vehicle socket and trailer plug, no wiggle-room, no loose fittings. Transfers the power from the vehicle to trailer. voltage range: 6-24 Volts.
  • 4-pin flat socket designed to be converted to the 7-pin blade round type socket. Works on most vehicle wiring component like turn signals, brakes,reverse light and auxiliary power..
  • Heavy duty black plastic construction prevents rusting, enhances appearance. Well sealed spring loaded cover increases protection against dust, moisture and corrosion..
  • Wide Application: Suitable for most trailers, semitrailers, caravans, RV. Commonly used with T-connectors or tail lamp converters with 4-way flat car end connections.
  • Package include: 1x Trailer Adapter Plug, 1xMounting bracket 6 screws and 6 nuts..
Check Stock

Wadoy 14 Inches Truck Camper Shell Lift Supports Struts Shocks Gas Spring,C16-06389 2 pack

  • 【Part number】: C16-06389, C1606389. Force: 24 pounds of pressure..
  • 【Exact fit】: Original equipment design ensures easy installation and precise operation. End fittings: fits 0.394 inch nylon ball sockets..
  • 【Dimensions】: Extended length A [in]: 13.98, compressed length B [in]: 8.90, stroke C [in]: 5.08..
  • 【Vehicle location】: Gas shock absorbers for rear lift gates on truck tops. Easy to install..
  • 【Your choice】: If there is any problem with the lift brackets, please contact us. We will replace a new one or refund for you..
Check Stock