Siphon Hand Pump Manual Fuel Transfer Pump Siphon Hose for Gas Gasoline Petrol Diesel Oil Liquid Water Fish Tank with Durable PVC Hoses,Portable Widely Use
【High Quality】: The siphon bulb is made of rubber ,which starts siphoning liquid flow quickly.
Both ends are made of heavy aluminum and clamped on with solid metal springs.
2 flexible duarable PVC transparent hose (1.2m+0.8m), provides easy reach into containers, petrol,high temperature and corrosion resistant..
【Easy to Use】：This Lightweight and portable siphon hand fuel pump has an arrow to show the direction of the water, which is easy to use.Connecting the PVC Hoses,a few squeezes of the bulb will get the flow of water started, remove the squeeze bulb, and flow will continue,then insert end of tube into a container below the level of the source. 1 to 3.5 Gallons per minute depending on if you flow through the pump or use just the hose..
【Hose Clip Secures】: There are metal buckles at the siphon pump connecting tip and hose, which can make the two more tightly connected. Includes one hose retainers clip to attach to a variety of containers to prevent potentially spilling any fluids and permit one hand operation – safety aid when moving fuel..
【Multi-Use】： This manual pump is for air, gas, coolant, fue....
TERA PUMP Next Gen Rain-Proof Gas Fuel Pump with 4.25-ft Long Discharge hose, Battery Electric Siphon Pump with Auto Stop System for Car Trucks Fuel Cells Tractor Generators Snow blower
[ TRANSFER RATES ] Transfers up to 2.3 Gallons per Minute with Auto-Stop Nozzle - Patented No Leak Design with Built-in Auto-Stop Nozzle stops pump automatically when container is full without the need to press the off button preventing any Overflow. Nozzle is is equipped with a locking clip to secure nozzle onto receiving receptacles for a hands-free experience.
[ RECOMMENDED ] Suitable for Gasoline, diesel, kerosene, light oils & non-potable water- XL Discharge Hose of 51-inch ( 4.25ft ) for refueling for farther distances, refuel Racing Car's Fuel Cell with ease - Discharge Hose Holder: Built-in nozzle holder for safe and convenient way of storing the discharge nozzle | Four (4) Gas Can Adapters included: One (1) for Racing Cans & Three (3) Others fits most North American gas cans.
[ FLEXIBLE SUCTION TUBE ] Suction Tube length of about 23-inch, Fits 3-Gallon (~11.4-Liters) Gas Cans, 5-Gallon (~19-Liters) Gas Can, Jerry Cans, Racing Cans and up to VIP Racing Cans - Suction end Outer Diameter: 1.2-inch - Back Saving: Lifting heavy gas cans will be a thing of the past.
15 HP Fishing Boat Engine 420cc Outboard Boat Motors Gasoline Engine, 4 Stroke Outboard Motor 6L Big Fuel Tank Up to 20 km/h 3600 RPM Single-Cylinder Trolling Motor for Foam Boats, Fishing Boats
【Motor Parameters】Power: 15hp, single-cylinder, four-stroke, general gasoline fishing engine.
Fuel tank capacity: 6L,Engine oil volume: 1.16L.
【Structural Design】 The gasoline engine has a unique and ingenious design. It uses the structure of the gasoline engine to directly drive the propeller, eliminating the need for complex mechanisms such as clutches and transmissions, making the product structure very simple and practical. Both the frame and the armrest adopt excellent pipe design, simple structure, light and portable.
【Strong Power】15 horsepower single-cylinder four-stroke general-purpose gasoline engine is adopted. The power of the fishing boat engine directly drives the propeller to rotate at a high speed through the coupling drive shaft, generating power to propel the boat forward at a speed of up to 20 km/h.
【Easy to Install】the fishing boat motor is very simple to install and use, and it only needs to be mastered and operated in a short time. Just fix the base on the stern, insert the frame into the base, and adjust the propeller draft at the same time to start the gasoline engine. By moving the handrails u....
【Safety and Compliance Production】 The fuel can is UN approved for gasoline, diesel and other dangerous goods, the 10l fuel meets the highest safety requirements for liquid cargo transportation./ Attachment: Provide Dangerous Goods Label Scope of supply: Tank with a capacity of 2.6 gallon.
【Sturdy and durable material】The metal gasoline Can is made of high quality cold rolled steel, which is very strong and durable. The portable filler tube is made of professional PET material, which has excellent corrosion resistance and fuel resistance, and can be freely bent, making it easier and faster to refuel..
【With safety vent and labor-saving handle】 The 2.6 gallon gas can has a vent hole to prevent negative pressure from flowing backwards, and the vent hole improves the liquid transfer efficiency! The handle is easy to lift and you can easily add fuel. Save time and effort when refueling. It is very convenient to carry in the car for emergency rescue..
【Easy and safe to use】The oil filling pipe is equipped with a filter, which can effectively filter impurities or foreign objects, etc., making the oil safer. Safety screw air release valve, anti-corrosion, anti-rust, anti-aging..
1 Brass Electric Solenoid Valve 110V AC NPT Normally Open Air Gas Water Viton
1" NPT THREAD- Commonly used standard pipe thread in U.S...
SOLID BRASS -This valve's body is made of solid brass (very corrosion resistant material)..
NORMALLY OPEN- The solenoid's magnetic field will directly move the plunger and close the orifice for any fluid or gas flow, while energized..
FLOW DIRECTION- The arrow indicates the flow direction (horizontal mounting please)..
VITON GASKET- Viton is space age material that is very chemically inert. As such it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident)..
1 Brass Electric Solenoid Valve 12V DC NPT Normally Open Air Gas Water Viton
1" NPT THREAD- Commonly used standard pipe thread in U.S...
SOLID BRASS -This valve's body is made of solid brass (very corrosion resistant material)..
NORMALLY OPEN- The solenoid's magnetic field will directly move the plunger and close the orifice for any fluid or gas flow, while energized..
FLOW DIRECTION- The arrow indicates the flow direction (horizontal mounting please)..
VITON GASKET- Viton is space age material that is very chemically inert. As such it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident)..
3/4 Brass Electric Solenoid Valve 110V AC NPT Normally Open Air Gas Water Viton
3/4" NPT THREAD- Commonly used standard pipe thread in U.S...
SOLID BRASS -This valve's body is made of solid brass (very corrosion resistant material)..
NORMALLY OPEN- The solenoid's magnetic field will directly move the plunger and close the orifice for any fluid or gas flow, while energized..
FLOW DIRECTION- The arrow indicates the flow direction (horizontal mounting please)..
VITON GASKET- Viton is space age material that is very chemically inert. As such it is commonly used with gasoline, kerosine and other organic solvents. Some companies sell solenoid valves with NBR gasket and advertise gasoline use. DO NOT USE NBR gasket for gasoline (it will corrode the gasket and can cause serious gasoline leak and accident)..
