VP Racing Fuels Motorsport 5 Gallon Square Plastic Utility Jug Yellow (2 Pack)
[Large Capacity] 32 gallons (121 liters) of fuel capacity to store enough fuel for multiple vehicles..
[12V Diesel Pump] Easy-to-use electric diesel pump, ready to use when connected to the power supply, with a flow rate of up to 10 gallons per minute..
[Easy to Use] The sturdy wheels allow you to easily haul fuel cans over rough terrain, and the heavy-duty handle on top allows you to carry them in a variety of environments..
[Excellent Material] The material of the tank body is made of petrol grade polyethylene tuff that can be stabilized and is resistant to corrosion and denting..
[Note] This product uses a diesel pump. Please DO NOT add GASOLINE. If there is static electricity, gasoline can easily cause spark combustion and even explosion. Please pay special attention not to use gasoline!.
Outboard Motor, 2 Stroke 12 hp 246cc Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System
...ke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
2-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It also has a ....
EFCUT C30 Wood Chipper Shredder has a 15.6 inch cutting rotor with 2 blades + 6 hammers turning out smaller shreds with high feeding speed, grilling device on discharge outlet turning shreds and leaves on branches into mulches..
EFCUT C30 Wood Chipper Shredder is easy to assemble, also easily chip, shred and mulch 3 inch MAX branches/limbs with leaves at a high waste reduction ratio up to 20:1.
EFCUT C30 Wood Chipper has a powerful recoil starting gasoline engine of 7HP 212cc Horizontal 4-stroke Single Cylinder OHV Gas Engine, Fuel w/87+ unleaded gasoline (maximum 10% ETHANOL gasoline can be used as well), 0.7 gallons Max capacity.
EFCUT C30 Wood Chipper Shredder has two unique designed check windows, the front one for faster replacement of blades and the back one for easier clearing blockage of debris, making your gardening work more efficient..
EFCUT C30 Wood Chipper Shredder can be used for Forestry, Gardens, Landscaping or yard waste recycling to chip tree branches/limbs, and shred brush as a Craftsman Limb Shredder.1-Year Warranty After Product Registration against machine construction(except blades etc. consumables).
[INCLUDE]: Standard bumping hammer, pick & finish hammer, reverse curve hammer，curved dolly, utility dolly, double end hand dolly, shrink dolly.
[DURABLE AND SAFETY]: The mallet made of steel makes it more durable. The handle of plastic fiber makes the tool more labor-saving and safe to use, and is not easy to cause damage to human body.
[APPLICATION]: It is mainly used for car repair, home decoration, etc. The tool set is equipped with storage box, which makes it more portable and easy to operate..
Outboard Motor, 6hp Heavy Duty Boat Engine Fishing Boat Motor w/CDI System Water Cooling System (2 Stroke 6 hp)
Hangkai two-stroke water-cooled outboard engine must put the machine in the water to start the machine to start (do not start the machine on shore).
Hangkai two-stroke water-cooled outboard engine uses the specified two-stroke engine oil in strict accordance with the instructions Mix it with No. 87 gasoline and use it in the correct proportion. Do not use four-stroke engine oil, automobile engine oil, Gear Oil.
Attention: It is strictly forbidden to start the machine on the shore. The two-stroke outboard engine should use a mixture of two-stroke engine oil and gasoline. The new machine is running in within 10 hours. The fuel ratio is 30L gasoline: 1L engine oil, and the ratio is oil after 10 hours. 50L: Oil 1L must ensure that gasoline and oil are fully mixed, otherwise it will damage the machine.
The ignition system of this outboard motor has a CDI ignition system. So you can start the motor quickly and safely, which saves your time and is very convenient to use. This outboard adopts an international standard air intake system and compression ratio, which can effectively improve combustion efficiency and thus reduce fuel consumption. It also has a 360-degree steering function that allows you to reverse the boat without shifting gears.....
Rotary Hammer Drill, ENVENTOR 1-1/4 Inch SDS-Plus 12A Heavy Duty Demolition Hammer Drills Corded for Concrete Stone, Safety Clutch 4 Functions with Vibration Control, Grease, Chisels, Drill Bits, Case
⚒【MAX POWER PERFORMANCE】The powerful 12 Amp motor /1500 Watts of this rotary hammer drill with 6 Joules Impact Energy with SDS Plus function make you complete any projects on masonry, concrete, brick, stone, metal, etc. The 6-SPEED adjustable speed of heavy duty hammer drill can easily achieve 0-880RPM switching. ISQUECER.
⚒【FOUR MULTI-FUNCTION OPTIONS】Easily use the Knob can switch different modes of the motor arbitrarily (Drill, Drill+Hammer, Shovel, Hammer), suitable for a variety of work scenarios. The corded hammer drills for concrete and brickwork is 1-1/4 inch (32mm), wood 1-5/8 inch (40mm), steel 1/2 inch (13mm)..
⚒【SAFETY CLUTCH】Demolition hammer 1-1/4 inch safety clutch protection design protects your wrist when the sds drill hammer is subjected to high torque if the bit ever gets jammed while using it in any tasks such as brick chipping, tile, and floor removal, or even making holes in concrete, masonry, metal, or wood..
⚒【HUMANIZATION Design】 Enventor heavy duty rotary hammer drill has a 360° rotating handle that is suitable for different angles of work and reduces fatigue. The soft-g....
Impact Rotary hammer Drill and Demolition Hammer 1INCH SDS Construction Power Tools - Electric Jack Hammer and Corded SDS Power Drill Function for Chipping Concrete and Tile Removal - Chisel
2 IN 1: More than just a rotary hammer drill, this smart all rounder from PTS combines the practicality of a portable jack hammer and corded drill in one powerful solution.
With the turn of a dial, choose between a 1,300 RPM rotary corded hammer drill or a ultra powerful 4,300 BPM chipping hammer any conquer any job.
This PTS demolition hammer features rock solid design in rugged, well ventilated housing.
Our chipping and rotary hammer holds drill attachments up to 26mm in width and features rapid brush change access.
When you need and electric jack hammer or concrete drill that will hold up under any conditions, trust only PTS.
All PTS demolition tools have undergone hours of development with leading power tool experts.
This two in one electric hammer and rotary driver features impact absorbing technology for advanced vibration control.
if we wouldn’t use this demo hammer ourselves, we won’t sell it.
PTS’ tile removal tool is your new bathroom renovation hero.
Beyond ceramic jobs, our 26mm jack hammer concrete breaker can also demolish stone, brick and even tough co....
LainKeen Inner CV Joint Puller Front Wheel Drive Axle Half Shaft Removal Tool Kit with Heavy Duty 10 Pounds Slide Hammer, 63mm 48mm CV Joint Fork Adapter Attachments
Remove CV Axle Easily: Using the CV joint puller, you can easily pull the old stubborn CV axle and install the new axle without damaging the expensive aluminum transmission cases and other parts..
Heavy Steel Slide Hammer: The slide hammer and the VC join fork is made of heavy duty steel, which can withstand huge pressure without deformation, is not easy to break. slide hammers are heavier and larger than normal ones, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, the length is 19.5 inches, so it can generate greater pulling force and work easier..
Efficient Slide Hammer: The overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. Use this universal joint slide hammer to work more efficiently..
Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm are suitable for most veh....
