Best Gear Motor Planetary

Stepper Motor Mounting Bracket, 6pcs Steel Motor Mounting Nema17 Bracket, with Mounting Screws

  • Mounts are thick 2mm metal bent into an L shape. spot-welded 2 little triangle-shaped wedges in the corners. Ideal for replacement applications..
  • Stepper motor bracket durable alloy steel provides strong bearing pressure when printing..
  • Nema17 brackets are 2 long slots so you could easily loosen screws, tighten the belt tension of the motor and belt, and tighten them back down easily..
  • Stepper motor alloy steel mounting bracket can match standard Nema 17 stepper motor, and also include the mounting holes for Nema 17 economy planetary geared stepper motor but not for high precision planetary geared stepper motor..
  • 6 pcs of NEMA 7 stepper motor mounting brackets, 90 degrees L-shaped bracket there are 4 holes drilled to mount for 3D Printer Motors Nema 17 Stepper Motor 42-40 Motor..
Check Stock

Rockland VMI14 12,000 Pound 12 Volt DC Electric Integrated Vehicle Winch Kit with a Synthetic Rope and Remote Accessory for Jeep Truck and ATV Recovery

  • MULTI-PURPOSE WINCH: Electric vehicle winch with a Hawse fairlead and synthetic rope provides car recovery in tough situations for trucks and SUVs.
  • CONVENIENT REMOTE OPERATION: Wired remote controller power switch allows for retracting the rope for winching as desired.
  • 12-VOLT DC MOTOR: Series-wound motor stays cooler during longer pulls to increase continuous operation time.
  • HIGH-PERFORMANCE GEAR SYSTEM: 3-stage planetary gear system with free spooling provides a fast line speed with a fast line-out.
  • FEATURES AND SPECIFICATIONS: Voltage detection and stall load protection capabilities flash red and blue LED lights to warn and alert you.
  • Dimensions (L x W x H): 21.3 x 6.5 x 9.76 inches.
Check Stock

Badland Winches 61383 ATV/Utility Electric Winch with Automatic Load-Holding Brake from TNM, 3500 lb

  • Permanent magnet motor draws less current, ideal for ATV use.
  • Single-stage planetary gear system for fast line speed.
  • Automatic load-holding brake for maximum safety.
  • Freespooling for fast line-out, 8 ft. Handlebar control and 12 ft. Ergonomic handheld remote control.
Check Stock

POLARIS SPORTSMAN KOLPIN QUICK-MOUNT WINCH 3500LB SYNTHETIC ROPE

  • Powerful: AC-DK 5500 lb winch features 3-stage planetary gear train, dynamic brake, weather-sealed solenoid and circuit breaker ensure safe, reliable power in all situation.
  • Efficient: AC-DK 5500 lb. line pull powered by a 1.4kw/1.9hp output permanent magnet DC 12V motor.The reliable dynamic brake prevent the rope from sliding while loading..
  • Convenient: Included two remote control.Fast circuit speed and High sensitivity.Unique clutch brake system, excellent control create an easier than ever winching experience..
  • Special designed: For ATV, UTV, car, boat, trucks, jeeps, modified vehicles and multi purpose utility trailers.Gear system with free spooling clutch.It will be your best partner on the muddy road..
  • Reliable: AC-DK includes 2-years limited warranty with FREE lifetime technical support from dedicated experts.
Check Stock

WARN 26502 M8000 Series Electric 12V Winch with Steel Cable Wire Rope 5/16 Diameter x 100 Length 4 Ton 8,000 lb Pulling Capacity

  • low-profile design and separate control box allows for a wide range of mounting options.
  • powers load in and out via 100 ft of 5/16 in wire rope.
  • efficient, 3-stage planetary gear box and automatic direct drive cone brake system.
  • powerful 4.8 hp series wound motor, with a 8,000 lb pull rating and sliding ring gear freespooling clutch.
  • electrical control box and hand-held remote with 12 ft (3.7m) lead.
Check Stock

Badland ZXR 12000 lb IP 66 Weather Resistant Off-Road Vehicle Electric Winch with Automatic Load-Holding Brake

  • Series-wound motor stays cooler during long pulls.
  • Three-stage planetary gear system for fast line speed.
  • Automatic load-holding brake for maximum safety- Free spooling for fast line-out.
Check Stock

X-BULL12V Wireless Steel Cable 12000LBS/5443KGS Electric Winch for 4WD 4x4 Off Road Vehicle Boat Truck

  • ...the clutch and the gear, it is not easy to cause damage to the clutch..
  • Installation dimensions: (length X width X height) 20.8"X 6.5" X 10.24", mounting bolt type: 10.00 ± 0.015" × 4.50 ± 0.010". Synthetic rope: 3/8' 'x 80 feet.
  • With a 3-stage planetary gear system for strong pulling.
  • The unique design is very suitable for your jeep Wrangler, SUVs, trucks and trailers, making it more attractive and cool.
  • To install the winch and fairlead, getting a mounting bracket set up which not includes in this product.
  • Please read the instructions carefully before operating the winch.
  • Using the snatch block to help your work more easily.
  • Another safety tip: throw a blanket onto the cables to reduce whiplash if something breaks loose.
Check Stock

Smittybilt X2O COMP - Waterproof Synthetic Rope Winch - 12,000 lb Load Capacity

  • Your purchase includes: Smittybilt X20 COMP Synthetic Rope Winch, hawse fairlead with forged hook, all required power cables to hook up to your....
  • Winch can be operated with the remote or manually.
  • Technical Specification: 6.6 HP Amphibious motor, 3-Stage Planetary Gear System, Stainless Steel Hardware, Dynamic Braking System, 2 Solenoid Mounting....
  • Lifetime Mechanical Warranty, 5 Year Electrical Warranty.
  • Overall Dimensions: 22.3"L x 5.4" W x 9.4"H. Mounting Bolt Pattern: 10” x 4.5”. Net weight: 67lbs..
Check Stock

Superwinch 1135220 Terra 35 3500lbs/1591kg single line pull with roller fairlead handlebar mnt toggle handheld remote

  • High efficiency, low amp draw, sealed 1.6 hp permanent magnet motor featuring mechanical load holding and dynamic brake.
  • 50' of 13/64" steel wire rope and ergonomic cam action freespooling clutch.
  • All steel planetary gear twice as wide as those used by the competition and utilizing machined-in, oil pocket bronze bearings.
  • Solenoid:Sealed and Circuit Breaker Protected.
Check Stock

WARN 92000 Vehicle Mounted 2000 Series 12V DC Electric Utility Winch with Steel Cable 1 Ton 2,000 lb Pulling Capacity

  • Small in size so you can mount in tight spots.
  • 1.6 horsepower permanent magnet DC motor.
  • Ideal for use on trailers or hitch mounts.
  • 35 feet of 3/16" (10.7m of 4.7mm) wire rope with hook and clasp included.
Check Stock