Best Gear Motor Reducer

RV Power Gear Slide Out Motor, PN 523900 523143 523983 521976 Slide Out Motor Replacement Gearbox Motor, Double Shaft 12V -3Year Warranty

  • 【After-sale Guarantee】We have a 3-year warranty,if you have any quality problems or the product doesn’t fit, you can send us an email, we will give you a replacement or a full refund within 12 hours.ATTENTION PLEASE!!! There are many rv slide out motors replacement that look similar to each other but are not fit.Please check your model before ordering!.
  • 【Replacement Part Number】The slide out motor can replace Klauber 523900, Lippert 383745, 523143, 523983, 521976, 523529, 524094, 524327, 524411, 523931, 524246, 520819, 522967, 522176 (check specs) 386322 (verify bolt pattern) ,521292, 386480, 368185, 523982, 523143S (has the smaller motor but same ratings), 523766, 130-1235, 130-1204c, 130-1164, 130-1187, 13-1109, 130-1219, 13-1133, 13-1119, K01469B300, K01439E300, K01531A300, K01265E300, 1510000006, K01265D300 (Gear ratio lower), K01265B300..
  • 【Specifications】Speed 9 RPM @ 850 in-lbs,17 Amps 12 RPM @ 400 in-lbs,9.5 Amps 14 RPM (no load) Voltage 12 DC Torque 850 in-lbs Holding Torque 500 in-lbs..
  • 【Easy to Install】Please watch the YouTube video before installing the motorhome slide out motor replacement part, so that your sliding motor can work quickly. You can solve the problem at half the cost, saving time and money..
Check Stock

Redrex Dual Gear Ender 3 Extruder with Nema 17 Stepper Motor Compatible with Creality Ender 3 V2,Ender 3 Pro,Ender 3 Neo,Ender 3 V2 Neo,Ender 3 Max Neo,Ender 5,Ender 7,CR6 SE,CR10,Vyper 3D Printer

  • 【Double Gear Extrusion Mechanism】The filament is gripped by the dual drive much more firmly with less deformation, so it doesn't jam as much in....
  • 【Upgraded Idler Gear Design】This idler gear is upgraded with two washers on both sides, so the sharp gear will NOT ride against the bottom of the....
  • 【Application】This all metal dual drive extruder with motor kit is compatible with Ender 3,Ender 3 V2,Ender 3 Pro,Ender 3 Neo,Ender 3 V2 Neo,Ender....
  • 【High Torque Motor】The Nema 17 stepper motor provides 1A 40Ncm/57g.cm^2 in holding torque which helps to improve the motor's stability..
  • 【Kindly Reminder】:Please calibrate the E-steps from 100 to 139.
  • Please lubricate the gears before first use.
Check Stock

X-BULL Winch-13500 lb Load Capacity Electric Winch Kit 12V Synthetic Rope,Waterproof IP67 Electric Winch with Hawse Fairlead with Wireless Handheld Remote and Corded Control Recovery

  • ...neration of wireless remote control, with an IP67 waterproof grade, that can operate accurately from a distance regardless of terrain or weather. This versatile controller incorporates wired and wireless control (up to 35m).
  • [Electric Winch] The 13500 lb. winch powered by a 4.5kw/6.0hp output permanent magnet DC 12V motor. The new solenoid successfully implements the principles of heat insulation, toughness, high stability, avoid the problem of capstan damage or motor burning caused by insufficient solenoid power. The connection between the clutch and the gear is strengthened by the new clutch system, making it more difficult to damage the clutch..
  • [Safety] For positive load control, there is a Power in & Power out motor. The powerful current can not only support the motor's operation smoothly and work within its rated current without any current impact, but also ensure the electric winch safety and your safety at all times. A 3 stage, 6.0 HP series wound motor comes with a 265:1 planetary gear ratio..
  • [Gear System] With its modern and effective 3 planetary gear system, free spooling clutch and ability to deliver strong traction under load and higher linear speed, this electric winch will prove to be an invaluable travel companion..
Check Stock

AMOGOT RC Steel Metal Spur Diff Differential Main Gear 64T 17T 21T 26T 29T Motor Gear for HSP 1/10 Monster Truck Brontosaurus Redcat Volcano EPX RC Replacement Parts

  • 【Feature】64T main gear and 17T 21T 26T 29T motor gears combo. 64T steel gears general for 1/10 trams, 17T, 21T for HSP 94111PRO 94111, 26T for HSP....
  • 【Spec】17T 21T 26T 29T Pinion gear aperture is 3.175mm, perfectly compatible with your motor, 64T Main gear aperture is 5mm, perfectly compatible....
  • 【Material】Steel Metal material, anti-wear, strong and durable, Rust-proof treatment on the surface of gears,more powerful and more stable..
  • 【Suit for】compatible with Redcat Lightning EPX Drift, Lightning EPX PRO, Sandstorm, Sandstorm TK, Tsunami EPX, Volcano Epx/epx PRO, Vortex HSP....
  • 【Package included】1 * 64T Motor Gear / 1 * 17T Pinion/ 1 * 21T Pinion/1 * 26T Pinion/1 * 29T Pinion.
Check Stock

Bringsmart JGY-370 12V 10rpm DC Worm Gear Motor 12 Volt High Torque Engine Mini Turbine Worm 12V Reducer Electric Motor Self-locking for DIY Mini Geared Motor (JGY-370 12V 10rpm)

  • ALL-METAL GEARS, high-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable, effectively protect the turbo worm gear box motor body..
  • D SHAPED OUTPUT SHAFT, using high hardness steel, good toughness, impact resistance, the quality of the bearing and the service life of the turbo worm gear motor are improved, extremely durable.
  • GEAR DC MOTOR with MICRO-TURBINE WORM, you can change the wiring-connection to change motor rotation. Low noise and high torque..
  • Application: Label machines, remote control curtains, automatic voltage regulators, barbecue grills, ovens, washers, waste disposal machines, household appliances, coin machines, paper currency recognizers, automatic actuators, coffee machines, towel machines, printing machines and Stage lighting. This section is suitable for small motor configuration high speed ratio, the installation space is limited occasions, large torque output..
Check Stock

WLtoys 104072 RTR 1/10 2.4G 4WD 60km/h Brushless RC Car Drift On-Road Metal Chassis LED Light Vehicles Model Off-Road Climbing Truck

  • ...variety of terrains plus independent suspension swing arm Smooth straight driving and excellent body control posture.
  • 3. The whole vehicle adopts ball bearing alloy gear simulation differential structure metal base plate, driving smoother, gear durable. 4. Adopt 7.4V 3000mAh high rate lithium-ion battery, brushless motor power output, speed up to 60 km / h.
  • 5. Adopt 6KG 3-line steering machine to control steering, straight driving is more stable Over-bending control is more flexible and durable. 6. Natural rubber tires, strong ground adhesion and friction resistance.
  • 7. Cool LED lighting car shell can control breathing headlights and simulated turn signals Brake lights Night operation barrier-free. Package Included: 1X RC Car 1X Remote Controller 1X Battery (Depends on your order selection) 1X USB Charging Cable 1X Manual 1X Cross Sleeve,Tips for Buyers:the remote control car is too fast, it is recommended to use remote control car in open areas to avoid bumping into obstacles..
  • Using brushless motor, fast speed, Using brushless motor, fast speed, high effciency, speed up to 75Km/h. High quality motor to make horsepower more powerful, faster than the same type of car. INDEPENDENT 60A ELECTRIC MODULATION ●INDEPENDENT RECEIVER ●INDEPENDENT STEERING G....
Check Stock

Fat Ass on Pink E-Bike

  • ... suspension frame with Double suspension fork & shock absorbing fat tire maximize riding comfort & control performance.The suspension doesn’t bob when you stomp on the pedals, yet becomes extremely plush the moment your wheels start smacking roots and rocks..
  • TOP MOTOR & BATTERY CONFIGURATION - Brushless gear 1000W Motor provides 42Km/h(26.1mph) maximum speed. 48V 17.6AH high quality Li-Lion cell & energy saving motor can get 60Km(37 miles) ridding distance. Please pay attention to the size and weight of the bike in case it is too big or heavy for you to ride. (Total weight: 101.85 lb).
  • TOP BRAKE & GEAR SHIFT CONFIGURATION - Hydraulic Disc brake & Gear Shift System. Front & Rear Hydraulic disc brakes give you double safety when riding. 7 Speed SHIMANO Acera rear derailleur & ECOTRIC exclusive smart display control increase hill-climbing power, further range variation, and greater terrain adaptability..
  • DETAILED SPECIFICATION - 26’’ X 4.8’’ Wide Fat Tires can accommodate any road condition and absorb riding shock.
Check Stock

Rotational 4th Axis A axis Rotary table Fourth axis 3 Jaw Chuck Gapless harmonic reducer gearbox stepper motor K11-100mm dividing head with 65mm Tailstock for CNC Router Engraving Milling Machine

  • Chuck Type:Gearbox K11-100mm 3 Jaw Chuck.
  • Zero Backlash with Gapless harmonic gearbox reducer.
  • Stepper motor: Nema23 2-phase 57 stepper motor.
  • Reducing ratio:50:1 (only have 50:1 type).
  • Accessories: Set of Anti-claw and wrenches.
Check Stock

Makita 9565CV 5\ SJS™ High-Power Angle Grinder

  • Powerful 13.0 AMP motor delivers more output and variable (2,800 - 10,500) RPM.
  • SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop.
  • Variable speed control dial enables user to match the speed to the application.
  • Constant speed control automatically applies additional power to the motor to maintain speed under load.
  • Soft start suppresses start-up reaction for smooth start-ups and longer gear life.
Check Stock

AT1-2200X Variable Frequency Drive Converter, 12 A 220V AC Single-Phase VFD Converter Motor Speed Controller for 3-Phase 2.2 kW AC Motor

  • Shaft Size: 5 x 8.5mm/0.2 x 0.33inch(Dia*H).
  • Motor Size: 24 x 19mm/0.94 x 0.75inch(Dia*H).
  • High step accuracy and resolution. low vibration and noise..
  • Stable and reliable performance, high efficiency.
  • Widely used on fan, warm air blower, electric heaters, burn oven, stage lighting equipment, microwave oven, lighting, Christmas gifts and other kinds of electrical appliances..
Check Stock