Mkbve USB Gearshift Knob from a MAN Truck ATS/ETS2 for Logitech G25 G27 G29 G920 H Gear Shifter Knob(Note:Only supports PC
USB Gear Shifter Knob is good quality for being plastic and the switches have good feel and placement. It has a long enough cord too so it can reach a decent ways to get to your PC or usb hub..
Sensitive shift between high gear and low gear - the handball head of high gear and low gear can be used as a switch to quickly switch between high gear and low gear, including two changers and up to 18 gears..
It's a great add on for American Truck Simulator and Euro Truck Simulator if you want to drive realistic manual..
On your Windows PC, USB Gear Shifter Knob is recognized as soon as you plugged it in. you don't need to install any drivers. It's basically a two button controller, one button handled by each switch. You will need to set it up properly in the simulators though for it to be recognized..
Note:USB Gear Shifter Knob only supports PC windows system..
ABN 3-Jaw Gear Puller Set – 3in, 4in, and 6in Removal Tool Kit for Slide Gears, Pulley, and Flywheel
[Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease.
3 prong gear puller evenly distributes pulling force to protect your gears.
[Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
[Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility.
[Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets.
Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
[Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal.
Amerbm Gear Hub Pulley Puller Bearing Separator 2 and 3 Legged 3" 4" 6" 8" Gear Puller Set Suitable for Remove of Gears, Hubs, Ball Races, Bearings, Flywheels, Pulleys and Sprockets
MATERIAL: Made of heavy duty steel, high hardness and strong, bear high-intensity pressure not easy to deformation and fracture, the exterior is coated with antioxidant layer to prevent rust, extended service life..
FUNCTION: This gear puller set can be reversed to pull parts from either the inside or outside. Hex head forcing screws suitable for use with your wrench, ratchet or spanner swivel thrust plates on the larger sizes prevents damage to shaft ends..
APPLICATION: The bearing puller suitable for the removal of gears, hubs, ball races, bearings, pulleys and sprockets. Even can be used for flywheels on small engines like found in outboards, lawn mowers etc..
DESIGN: This removal tool kit includes four puller sizes to cover most applications: 3 inch gear puller with a 4.3" max. reach and 3" max. spread.
4 inch gear puller with a 5" max. reach and 4" max. spread.
6 inch gear puller with a 7.3" max. reach and 6" max. spread.
and 8 inch gear puller with a 9.3" max. reach and 8" max. spread..
Stark 4-Pieces Jaw Gear Puller Set (3-inch, 4-inch, 6-inch and 8-inch) Removal Bundle Set for Pulley, Slide Gears, and Flywheel
Multi-Position Design - Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility.
Damage-Free Removal - Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application.
Built-to-Last - Forged &hardened steel provide maximum strength and longevity to the gear puller sets.
Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.
Work with your Tools - Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal.
Durable 4pcs Jaw Puller Set - 3, 4, 6 and 8-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease.
3 prong gear puller evenly distributes pulling force to protect your gears.
Traxxas 59076-3-RED Slayer Pro 4×4 Red TRX 3.3 Engine w/EZ-Start 2 Speed Transm
...r dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Dimensions: Length: 21.5″ (546mm) Width: 9.4″ (238mm) Behind Front Wheels Narrowest Point 11.4 (290mm) at Rear Wheels Widest Point, Heigh.
Part number(s) included (in factory packaging): 59076-3.
Traxxas 59076-3-BLUE Slayer Pro 4×4 Blue TRX 3.3 Engine w/EZ-Start 2 Speed Tran
...r dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Dimensions: Length: 21.5″ (546mm) Width: 9.4″ (238mm) Behind Front Wheels Narrowest Point 11.4 (290mm) at Rear Wheels Widest Point, Heigh.
Part number(s) included (in factory packaging): 59076-3.
Gonex Size S Inline Skates with Elbow Pads Knee Pads and Wrist Guards for Girls Boys
1 Piece: Size S Gonex Inline Skates for Girls Boys Kids, Adjustable Skates Outdoor Blades Inline Roller Skates with Light Up Wheels for Indoor Outdoor Backyard Skating.
1 Piece: Size S Gonex Skateboard Elbow Pads Knee Pads with Wrist Guards, Skate Pads for Kids 3 in 1 Protective Gear Set for Skateboarding Skating Cycling Biking Bicycle Scooter.
Adjustable Inline Skates: One pair of boots can be adjusted to different sizes as kid's feet growing to ensure years of fun. 3 sizes (S/M/L ) are available for your choice, please check our size chart first and choose the proper size..
All Round Protection Set: Our skateboard protective gear comes with 1 pair of elbow pads, 1 pair of knee pads and 1 pair of wrist pads, easily packed up in a convenient storage bag (provided). Enjoy your exciting outdoor sports with our our safe gear set!.
Gonex Quality Commitment: We stand behind our Gonex products. Customers satisfaction is our priority, so please feel free to contact us whenever you have any question with the item..
