uxcell 1/4 inch to 10mm Bore Rigid Coupling Set Screw L25XD16 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue,2pcs
Connection Diameter: 1/4 inch to 10mm, Total Length: 25mm /0.98 inch, Outside Diameter : 16mm/ 0.63 inch.
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
The Lancer Tactical Gen 3 is Lancer Tactical’s newest innovation. Majority of the internal parts will be similar to Lancer Tactical’s Proline series AEGs with a few new features and upgraded parts.
Lancer’s new Gen 3 uses a new built-in Zion Arms fully programmable electronic trig unit that can be programmed to shoot in varying burst modes..
Unlike the Gen 2, the Gen 3 are now equipped with a deans connector that helps with saving more space for higher capacity batteries.
The Gen 3s come out of the box shooting at around 380 – 400 FPS but we have also included a low FPS spring right in the box..
Reinforced metal Gen-2 gearbox with ultra smooth 8mm ball bearings, 18:1 steel gear set, steel teeth polycarbonate piston, bearing spring guide, rotary hop-up, 19,000 RPM high torque motor for consistent performance.
The Lancer Tactical Gen 3 now comes with a high speed 130 round mid capacity magazine that ensures proper feeding and helps prevents jams.
(Not included) Recommended 11.1V 600 mAH 20C PDW Stick or 11.1V1000 Dean.
uxcell 8mm to 8mm Bore Rigid Coupling Set Screw L25XD14 Aluminum Alloy,Shaft Coupler Connector,Motor Accessories,Blue w Wrench
Widely used in blowers,3D printer,DIY robots,CNC machine,stepper motors,etc. Similar to rigid clamp couplings, shaft couplers are used to hold bearings and sprockets tightly on the shaft, and are used in motor and gearbox assemblies..
Top tight type rigid coupling with 2/4 screws to hold the shaft tightly.
high torque with rigidity, low inertia and excellent sensitivity..
NOTE: The rigid type basically does not allow eccentricity, and it must be fully adjusted during use..
Single piece set screw clamp design makes it easy to set up the items on the shaft and control the holding capacity of the coupling..
Mophorn Go Kart Forward Reverse Gear Box 10T #40/41 12T #35 Go Karts Accessories TAV2 30 40 41 For 2HP-7HP Engine Transmission Local Honor 3 Shift Modes ONLY Works with 30 Series Torque Converter
Structural Parameters: Gearbox Shaft Size: 5/8".
Quality Metal: This go-kart gearbox is made of high-quality metal, wear-resistant and lightweight. It provides precise torque and a long lifetime..
Three Shift Modes: Our go-kart gearbox kit has three shift modes: forward, reverse, and neutral. It allows for convenient and easy operation..
Complete Accessories: This go-kart transmission kit includes 1 x forward / reverse gearbox with 3/16" keyway, 1 x gear lever assembly, 1 x gearshift....
High Adaptability: This 30 Series forward reverse gearbox is suitable for # 35 chain 12T and #40/41/420 chain 10T go-karts, dune buggies, UTV, and....
PHYNEDI Manual 8 Speed Gearbox Transmission Bricks Model Compatible with Lego, MOC DIY Small Particle Construction Collection Building Toy for Adult, Genuine Authorization MOC-79482 (685 Pieces)
Exquisite Detail: MOC-79482 was licensed and designed by TechnicBrickPower. This is an 8-speed manual gearbox. The gearbox ratio is very close to the real 488 GTE gearbox ratio, except that it uses a manual 8-speed gearbox instead of an automatic 8-speed gearbox..
PDF electronic manual: There are 685-piece bricks in total. With Electric PDF manual stored in U-disk to help you assemble easily. It can be a cool new model added as new set for your collection. After the building blocks are assembled, it is an excellent ornament. It can be used as a background decoration. The assembly process feels the mystery of learning mechanical engineering. Make the overall experience better.
Compatible with All Major Brands: Designed in accordance with universal standards, Our building bricks are compatible with your existing name brand building toys. All parts are easy to put together and dont fall apart, which is strong expandability..
Safe & High Quality Materials: All our building bricks set are made of high quality ABS material with high safety level. Precision casting processing molding, no smelling, smooth. Easy to remove. With exquisite color box packaging, it is extremely suitable for gift giving, especially for birthday parties, Christmas, Thanksgiving, back....
10:1 Planetary Gearbox 1/2\(12.7mm) Input Shaft for Nema 34 Stepper Motor 3000RPM Gearhead Gear Reducer CNC Benchtop Lathe Machine (10:1)
1/2" (12.7mm) Input Shaft , connect directly with motors which has 12.7mm shaft.
Rated 30Nm high torque planetary gearbox ,10:1 speed reduction.
Nema34 flang, the gearbox must be screwed on the motor with the offer 4pcs screw to keep the concentricity. Very easy to install on motors, gearbox output shaft keyway dimension 5*5*25mm.
Rated speed is 3000RPM, precision less than 25 Arcmin.
This nema34 planetary gearbox mainly matches the stepper motor to reduce speed and increase torque. Widely used in CNC field on mill,lathe,bench,packaging machine etc..
Function: Gearbox Mainshaft Nut Tool is designed to accept a 1/2" drive wrench or a 30mm AF socket/spanner, This tool is used for tightening up the mainshaft nut on the end of the gearbox output shaft to a torque of 85lbf..
Operation: This is to ensure the best engagement between the teeth on the tool and the spindle lock nut.
it is common to find the spindle lock nut that has been tightened with a hammer and chisel..
Contains: 1 × Gearbox Mainshaft Nut Tool (Equivalent to OEM 600300). This nut Fit For Land Rover Series vehicles with the factory fitted gearbox.
Material: They are precision manufactured from toughened steel and zinc plated to ensure they last for years. EN24T Steel gives the tool high tensile strength, shock resistance, good ductility and resistance to wear..
Service: ZKTOOL is committed to providing the best professional tools and best service for auto repair. If you have any questions, please contact us. We provide 24-hour before and after sales servic.
WAKAKAC 1/32 Toy Car for Honda Civic Type-R Diecast Toy Vehicle Metal Pull Back Model Car with Light and Sound for Kids and Adults
12V Gearbox and Motor Left&Right for Motion Trendz Action Wheels.
Motor Type - 12V 12000RPM Electric Motor and Gearbox With Wires.
Compatibility - Perfect Fit For A Wide Variety Of Action Wheels Motion Trendz Ride On Applications Including Motion Trendz Yamaha Raptor 700R ATV HONDA TALON UTV Disney Frozen Sleigh..
Quality Assurance - Crafted Wtih A Rugged Construction, Our Gearbox Are Ultra Durable.
User Friendly - Easy, One-Time Installation Of Our All New Gearbox Will Get Your Ride On Running In No Time At All..
Lancer Tactical Gen 2 Airsoft Rifle SD M4 GEN 2 Polymer- Electric Full/Semi-Auto Airsoft AEG Rifle with 0.20g BBS, Charger and Battery (Tan Low FPS Polymer)
MATERIALS – Gen II version upgraded with a nylon reinforced body.
version 2 gearbox features metal gears along with the cylinder teeth.
RAIL SYSTEM FOR ATTACHMENTS – Free float modular rail interface system for attachments.
GEARS – Gears rotate smoothly provided by the 8mm ball bearings.
crafted and polished 6. 03mm tightbore barrel improves range and accuracy.
Battery – Simple Battery (9. 6 V Nunchuck) Placemen.
Automatic Power Shut Down Once Charger (included) Detects Battery Is Fully Charged.
Features – High Capacity Magazine Holds 300 Rounds (Winding Wheel-Wind 15 times at least on First Use/Continue Winding While Shooting).
Drfeify RC Gearbox Bottom Plate, Metal Gearbox Bottom Plate Available for AXIAL SCX10 / TFL Carframe RC Accessories
NOT BURDEN FOR RC CAR : The gearbox base is lightweight and does not burden your RC model car..
DURABLE TO USE : The gearbox base is made of high-quality aluminum alloy and it is sturdy and durable, and screws and nuts are presented as a gift..
PERFECTLY FIT : The RC gearbox base is exquisitely crafted and perfectly sized. The gearbox base plate is easy to install and remove and fits perfectly into your RC car..
MANY SCREWS AND NUTS PROVIDED : Many screws and nuts are provided for your own installation and repair, with enough parts to replace you..
UPGRADE ACCESSORY : If the original parts of the model car are damaged or too old, our products are an ideal replacement for your previous parts..
