Quartex Standard Push-On Movement with Hex Nut - Long Shaft
Quartz Clock Movement Kit: This clock mechanism is perfect with its clock parts for repairing, replacing, or making your own DIY clock project. The clock movement design keeps foreign matter out of the gears, resulting in years of trouble-free operation..
Clock Movement Measurements: Total hand shaft length is 28.6 mm (1 1/8 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
Maximum Clock Dial Thickness: 17.5 mm (11/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 19.1 mm (3/4 inch). For finding a replacement, measure the threaded portion of the shaft on the old clock movement. If length is shorter or equal to 19.1 mm (3/4 inch), this is suitable..
Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand ....
Quartex Standard Push-On Movement with Hex Nut - Short Shaft
Quartz Clock Movement Kit: This clock mechanism is perfect with its clock parts for repairing, replacing, or making your own DIY clock project. The clock movement design keeps foreign matter out of the gears, resulting in years of trouble-free operation..
Clock Movement Measurements: Total hand shaft length is 14.3 mm (9/16 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
Maximum Clock Dial Thickness: 3.2 mm (1/8 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 4.8 mm (3/16 inch). For finding a replacement, measure the threaded portion of the shaft on the old clock movement. If the length is shorter or equal to 4.8 mm (3/16 inch), this is suitable..
Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand ....
[DIVERSE SET OF SCREW-BITS&MULTIPLE FUNCTION]-Includes 30 Pcs driver bits,1pcs extendable bits,1pcs flexible shaft,that fit most of your daily needs, suitable for furniture assembly, installation of mini blinds or other window coverings, mounting of storage and decorative shelving..
[TWISTABLE SWITCH & 6+1 TORQUE GEARS]- it has a forward/reverse rotational switch to allow you to either tighten or loosen the screws.
Max 6N.m Torque range,efficient 6+1 stage torque settings allows to choose different torque,to prevent overpowering of delicate fasteners..
[VERSATIBLE FUNCION FEATURES]-A LED light around the head of screwdriver Makes it easier to work in the the darker corners.
A extendable shaft provides a flexible operation way for the untouchable corners..
[LARGE BATTERY CAPACITY AND DURABLE]- It built with a 1500mAh lithium-ion battery for endurable power,Accepts any micro USB to USB charging cable (included), so it can be charged from a variety of ports, including a computer with a USB outlet.(Note:The battery is non-removable,irreplaceable ).
[PACKAGE CONTENTS]- Powerextra SD136 Electric Screwdriver.
An Assortment of 30pcs Driver Bits and 1pcs Extension Bit Holder.
【External Retaining Ring E-Clip Kit】Wide Size Range (Metric): 1.5mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm..
【High Quality Stainless Steel 】Made of durable heat-treated 304 stainless steel, with excellent rust resistance feature. Providing the good resisitance to corrosion and high temperature, holding strongly and lastingly..
【Easy to Use】This E clip kit is easy to assemble and disassemble. Suitable for small size shaft to position parts and prevent them from falling off..
【Storage Box】Come with storage case and each size is neatly put in it's individually compartment in a transparent storage case. Easy to get the size you need and quick access!.
【Widely Used】Good for retension of bearings, gears, pulleys, axles, shafts, and other moving parts. Provides excellent rust resistance in water applications, suitable for Indoor and Outdoor Use..
Quartex Q-80 Quartz Clock Movement, 3/16” Max Dial Thickness, 5/8" Hand Shaft Length
Quartz Clock Movement Kit: This clock mechanism is perfect with its clock parts for repairing, replacing, or making your own DIY clock project. The clock movement design keeps foreign matter out of the gears, resulting in years of trouble-free operation..
Clock Movement Measurements: Total hand shaft length is 15.9 mm (5/8 inch). Total shaft diameter is 7.9 mm (5/16 inch)..
Maximum Clock Dial Thickness: 4.8 mm (3/16 inch). Refers to the thickness of the combined material (clock face material and support board the dial is mounted to) that the threaded length of the movement shaft travels through. The hardware adds 1.6 mm (1/16 inch) making the total length of the threaded bushing 6.4 mm (1/4 inch). For finding a replacement, measure the threaded portion of the shaft on your old clock movement. If the length is shorter or equal to 6.4 mm (1/4 inch), this is suitable..
Clock Hands Measurements: Total black spade hour and minute hand length is approx. 63.5 mm (2 1/2 inch), total red second hand length is approx. 69.9 mm (2 3/4 inch). The Q-80 movement will have a step motion that creates a ticking sound, powered by an AA battery..
Package Contents Include: One easy to assemble quartz clock movement, one hour hand, one minute hand, one second hand, and hand m....
Straight miter 90 degree mesh transmits mechanical power between perpendicular shafts.
Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
Bore has keyway and setscrew for use with keyed shaft.
Traxxas Stampede 2wd XL-5 VXL MAGNUM 272 GRAY CASE TRANSMISSION w/ STEEL GEARS
Make sure this fits. by entering your model number..
Magnum 272 Transmission - Gray The Magnum 272 Transmission is assembled with all metal gear internals riding on ultra-smooth sealed ball bearings. Combined with the smooth 48-pitch gears (not included), power is delivered quietly to the telescoping U-joint driveshafts (not included). The sealed gearbox protects the transmission components from dirt and rocks. Includes Gray Transmission Gearbox Halves (Part # 3691A) Input Slipper Shaft (Part # 3793) Six (6) 5x11x4 Ball Bearings.
Seal Conditioner – stops current and prevents future leaks by protecting and reconditioning seals..
Extreme Pressure (EP) and Anti-Wear (AW) Agents – provide excellent metal-to-metal wear protection reducing noise and gear temperatures. Our sulfur, nitrogen and phosphorus additives meet the requirements of API GL-4 and GL-5 specifications..
Friction Modifier – supplements the EP/AW additives to help reduce noise and wear. This in turn helps shifting in a manual transmission and also stops chatter in limited-slip posi-traction axles..
Performance Additive Booster – includes tackifying agents and highly sheer-stable multigrade viscosity modifiers to keep oil on the gears and bearings where it can better lubricate, especially at higher temperatures. Pour Point Depressant (PPD) allows product to flow even at very low temps..
Manufactured in the USA, this product works in all manual gearboxes, differentials, open & posi axles and more. Stops pinion, axle, output shaft and other seal leaks. Reduces grinding, whining, clunking and protects gears..
