Best General purpose Tap Set

Viking Drill and Tool by Norseman 43550 Type 240-B Bright Finish 118 Degree HSS Drill Set (115 Piece)

  • 115 pc Set High Speed Steel Bright Finish Jobber - General Purpose 118-Degree Point.
  • 1/16 - 1/2 by 64ths, #1 - #60, A - Z 118-Degree Point.
  • High speed steel provides good wear resistance, can be used in general purpose applications for ferrous and nonferrous materials.
  • Bright finish increases chip flow in softer materials such as aluminum, wood and plastic.
  • Spiral flutes with a higher flute angle to remove chips more easily.
Check Stock

Drillco 4570E Series High-Speed Steel Taper Pin Reamer, Helical Flute, Round Shank, Uncoated (Bright)/Black Oxide Finish, 1 Size, 2-15/16\ Length

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Available in uncoated (bright) and black oxide finish.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Square shank allows hand (straight and spiral flute) reamers to be held in a tap wrench or vise, depending on whether the reamer of the part is rotated.
Check Stock

Diablo by Freud DOU3CS 3 pc Universal Fit Carbide Oscillating Blade Set (3-Piece)

  • 3-Piece set provides up to 40% in savings.
  • Includes: (1) DOU125CGP 1-1/4 in. Carbide Blade for General Purpose Cuts, (1) DOU275RCGP 2-3/4 in. Carbide Blade for General Purpose Cuts, (1) DOU125CF 1-1/4 in. Carbide Blade for Metal.
  • Universal interface design fits most tools, no adapters needed.
  • Maximum performance in cordless and corded oscillating multi-tools from Bosch, Craftsman, Dewalt, Dremel, Fein, Hart, Makita, Milwaukee, Porter-Cable, Ridgid, Rockwell and more.
Check Stock

Teng Tools 1100 Piece Complete Mixed Monster Mega Master Hand Tool Kit - TCMONSTER02

  • 10 drawer top box, 9 drawer roller cabinet, 49 screwdrivers, 206 sockets & accessories, 33 pliers, 4 pullers.
  • 87 wrenches/spanners, 135 TX/Hex bits & drivers, 6 empty add on trays, 95 impact tools, 13 extensions, 16 piece mini tool set, 121 piece crimping pliers set.
  • 3 inspection tools, 5 measuring tools, 4 scraper & removal tools, 12 needle files, 5 files, 11 extractors, 3 hose clamps, rivet gun set.
  • 5 cutting tools, knife set, 9 punches & chisels, 35 bits, 18 stud extractors, 9 nut drivers, 16 oil service tools, nutsert rivet gun set.
  • 9 general tools, 2 torque wrenches & accessories, 34 tap & dies, 8 hook & pin wrenches, 3 roll/heel bars, 3 pry bars. Lifetime warranty. See description below for full list of contents.
Check Stock

Pentair OMNIFilter TO1 Carbon Water Filter, 10-Inch, Standard Whole House Carbon Wrap Sediment and Taste & Odor Replacement Filter Cartridge, 10' x 2.5', 5 Micron, Pack of 2

  • ECONOMICAL SOLUTION FOR ALL YOUR GENERAL-PURPOSE WATER FILTRATION NEEDS to provide cleaner, clearer, better tasting water throughout your household.
  • PAIRS BEST WITH Pentair OMNIFilter U24, U25 and U30 10" Standard Filter System.
  • fits all 10" standard filter housings and can replace any 10" x 2.5" carbon filter cartridge.
  • DUAL-PURPOSE CARTRIDGE filters out fine sediment particles and reduces unwanted taste, odor, and chlorine taste & odor from your tap water.
  • CONSTRUCTED OF CARBON IMPREGNATED CELLULOSE MEDIA with external netting for additional strength and dirt-holding capacity.
  • 15,000 GALLON CAPACITY. Replace every 3 months or when you notice a drop in water pressure or water quality.
  • Standard cartridge. for use with chlorinated water.
  • Cleaner, clearer, better tasting water for the household.
  • Reduces sediment, rust particles and chlorine taste and odor.
  • Fits standard OMNIFilter whole house systems.
Check Stock

Lenox Classic Tuff Tooth Band Saw Blade, Bimetal, Hook Tooth, Raker Set, Positive Rake, 186\ Length, 3/4\ Width, 0.035\ Thick, 3 TPI

  • Hook tooth is suitable for general-purpose cutting and can be used on materials that produce a discontinuous chip.
  • Bimetal for cutting carbon steel, alloy steel, tool steel, structural steel, stainless steel, and aluminum and other nonferrous metals.
  • Good for cuts in cylindrical solids, tubular shapes, and structural shapes.
  • M-42 high-speed steel tooth edge for heat and wear resistance.
  • Raker set for general-purpose cutting applications.
Check Stock

Lenox - 76123D2B51638 Diemaster 2 Band Saw Blade, Bimetal, Regular Tooth, Raker Set, Positive Rake, 64.5\ Length, 1/2\ Width, 0.025\ Thick, 18 TPI

  • Regular tooth design for general-purpose cutting.
  • Bimetal for cutting wood, aluminum and other nonferrous metals, carbon steel, alloy steel, tool steel, structural steel, and stainless steel.
  • Good for cuts in solid shapes, rectangular tubes, structural shapes, and sheets.
  • Raker tooth set for general-purpose cutting applications.
  • Flexible back is suitable for contoured cuts.
Check Stock

Kastar 971 SAE and Metric Thread Restorer Kit

  • ...apping, or locked for non-ratcheting use. It is very convenient for one-hand operation. It can improve work efficiency, is a good partner for Home DIY tapping..
  • WIDELY APPLICATION --- T-Handle Wrench with metric taps set made of premium high speed steel, last long-time working properly. A good thread tapping set for general wood, soft metal, aluminum, plastic plate and other common "work from home" jobs. It is suitable for routine maintenance, repair work and re-threading where the thread precision and tolerance requirements are not very high. (Please remember that cutting metal need to use with the grease.).
Check Stock

Williams B-52A 3/8-Inch Drive Round Head Ratchet

  • Adjustable Die Handle Round Die Stock Wrench Holder with adjustable screws. Suitable for making or repairing male and female threads. Good for general purpose applications..
  • Special Design: High-speed steel machine tap is with high hardness and toughness for wear resistance. Features just the base substrate without any additional coatings. With adjustable screws, the die stock can securely hold round dies..
  • Easy to Use: The positioning groove of the die should be aligned with the fastening screw in the middle of the die wrench, and the screw should be inserted into the slot of the die and tightened..
  • Tips: It needs to be reversed every 1/4~1/2 turn to facilitate the chip discharge from the chip hole. Suitable lubricating oil should be added to the cutting edge of the die when tapping threads..
  • Measure the size manually. If the product you receive does not meet your needs, please contact us and we will do our best for you..
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock