【3 IN 1 CAULKING TOOLS】 This caulking tool combine 3 functions into 1 including silicone smoother, flat angle scraper, internal angle scraper.It's an good tool for most silicone jobs, any edge, corner, joint..
【WIDE APPLICATION】 The caulking tools can use for home, kitchen, bathroom, tank, window, sink joint and so on. Easy to clean with a damp cloth and reuse..
【TWO MODE SCRAPERS】 Silicone trowel to remove surface bumps and dents, stainless steel scraper remove stubborn old glue, Sliding switch design, easy to switch between trowel and scraper..
【VALUECUSTOMER EXPERIENCE】 PXShpot provide good service for our customers, if you're not thrilled with its performance, please let us know..
The baseline bubble inclinometer accurately measures complete range of motion.
Measurement techniques of the bubble inclinometer have been codified and appear in the AMA guide to the evaluation of permanent impairment, third edition.
Place the baseline bubble inclinometer near the joint to be measured: turn dial until scale reads 0.
Numerous neck and back measurements require the simultaneous use of 2 inclinometers.
The Nurge adjustable embroidery seat stand 190-1 is made from hard beechwood, fine sanded and polished for a super smooth natural wood finish. They are the crafter’s choice for quality..
It is height adjustable joint (minimum height 32cm ( 12.6″), maximum height 48cm (19″) The seat embroidery stand allows easy embroidering using both hands..
It can be used as a table-top stand but is ideally designed to be a seat stand by sitting on the lower base tucked under your legs allowing comfort and creativity at the same time..
The stand has a height-adjustable joint (minimum height 32cm ( 12.6″), maximum height 48cm (19″), plus a hoop holding knuckle joint that will pivot to any angle so that you can find the optimum height, distance and angle depending on your hoop size for maximum comfort while creating your next masterpiece.
Size - 190-4 Model : The stand will fully extend out to a height up to 53cm (21″). The base is 39cm (15″) x 21cm (8.3″)..
RISEPRO 10-Inch Digital Torpedo Level and Protractor IP54 Protected Electronic Bubble Inclinometer, Angle Finder, Gauge w/Large VA Display & V-Groove Base DL135N
RELATIVE OR ABSOLUTE ANGLE MEASUREMENT - The regular absolute measurement mode can measure the angle against horizontal plane. This tool also features with relative measurement mode for quickly measuring angle between two measured surfaces..
EASY READABLE VA DISPLAY & SWITCHABLE UNITS – Clear and bright VA display allows you to use this device in the dark without light. Display modes can be converted from degrees (') to percent (%), to (mm/m), to pitch (IN/FT)..
STRONG MAGNETIC V GROOVE BASE & HOLD FUNCTION - The V Groove base with strong magnets enables strong attachment over a curve or cylindrical magnetic surfaces such as metal pipeline or shafts. Hold function helps save the current angle on the display..
SMART AUDIBLE BUZZER - This inclinometer has beeper sounds feature at horizontal position (0°) or vertical position (90°) which makes you more convenient and easier when it is in use. You can also listen it where you are unable to see the display..
WIDE APPLICATIONS – Great tool for automotive, wood & mechanical industries, machinery, medical fields....
kemimoto UTV Side Mirrors And Center Mirror with 1.75
UTV Side MirrorsThese UTV side view mirror dimenions are 3.7" wide by 7.5" tall, with a sleek and stylish design that looks great on all UTV's and big enough for maximum view, even over harsh terrain and whoops..
UTV Center Mirrors - Non-slip ball joint, 360-degree rotation to adjust your view angle. This UTV mirror can gives good angle of rear view you could see everything that was coming up, easy to adjust and easy to install..
Convex Design Mirror - This RZR pro r mirror provides more viewing range for you to easily to prevent blind spots and some traffic accidents, which can improve your safety greatly..
Wide application - These utv side mirrors Fits almost all UTV"s with a 1.6" - 2" diameter round tube roll cages - Compatible with RZR, Kawasaki Pioneer and Can Am. Not Compatible with Polaris Ranger XP1000 XP900, Pioneer 700/1000..
Breakaway FeatureHigh impact ABS housing, adjustable ball socket joint for maximum adjustment, along with a "breakaway" feature and shatter-proof tempered glass.Picture 2 is the way to adjust the mirror angle..
Digital Angle Finder Protractor, Preciva Digital Protractor 7 inch / 400mm Stainless Steel Measuring Ruler with Large LCD Display for Woodworking, Measurement, Construction Angle Measuring Tool
【Large LCD Display & High Precision】 Preciva digital protractor is equipped with a large LCD display for easy reading.
【Locking Function】Convenient locking screw-by pressing the screw, the ruler can be kept at any angle.For maintain its accuracy and read it easily, Preciva angle finder could be locked at any angle..
【2 in 1 Digital Protractor】Digital stainless steel ruler and angle finder combo makes precise measurements.the hinge mechanism on the angle rule allows complete 360-degree measurement of internal and reverse angles.
The protractor combines standard and metric scale scales.Relative and absolute angle measurement..
【Durable Rulers & Low Power Consumption】The digital protractor angle gauge & angle finder durable stainless steel body can be used for a long time.
HOLD and RESET function, laser engraving scale, clear and accurate, will not fall off.In addition, it also has the advantage of energy saving, it will automatically close after 6 minutes of inactivity..
【Battery Included】Large capacity standby with automatic power-off function ,use a CR2032 button battery to work for more than 2000 hours .Saving power consumption and extending battery life..
eOUTIL Digital Level Angle Finder Waterproof IP65 Protractor Angle Gauge Inclinometer with V-Groove Magnetic Base/0~360 Degree
V-groove Magnetic Base: This magnetic V-groove base of digital angle gauge can be firmly attach to ferrous metal surfaces like pipe, steel construction framing, metal fabrication. Rugged durable aluminum frame for precision leveling measurement.
Absolute & Relative Measurement: This digital protractor has absolute angle measurement to test whether the working surface is on the level to check roof slopes, wheel alignment, etc. Moreover, this magnetic level lets you check the relative angles between the surfaces.
High Accuracy: Accurate to the ±0.1° at 0° and 90°.
±0.2° at other angles. Displays angle and bevel readings in degrees, pitch IN/FT, mm/M, and percent slope. With reading hold function, it is convenient to record by this level digital inclinometer bevel box. Moreover, you can have an accurate measurement of the angles between two measured surfaces.
Backlight LCD Display With Audio Indicator: Featuring a large, bright LCD display you can easily read the measurements whatever the light conditions. The display value reverses automatically when the electronic level is upside down. Acoustic signal routing via beeps when you reached 0° or 90°.
IP65 Waterproof And Dust-proof Level: It has IP65 protection which makes it suitable for use in harsh ....
TAGVIT 1/2 Inch Drive Digital Torque Wrench, 7.38-147.5 ft-lbs./10-200Nm Angle Digital Torque Wrench, Electronic Torque Wrench with Buzzer and LED Flash Notification, ±2% Accuracy
Four Torque Measurement Units: This digital torque wrench can measure from 7.38-147.5 ft-lbs./10-200Nm, with easy to read LED display, available in Nm, Ft-lb, In.lb, Kgf.cm four measurement value switching, can adapt to the application of different torque unit measurement. The angle digital torque wrench has an accuracy of ±2% clockwise and ±3% counterclockwise. Comes with a calibration certificate and conforms to ISO 6789 and ASME B107.14M standards..
Buzzer & LED Indicator: When the set torque is reached, the 1/2 inch torque wrench will emit a flashing light, and the buzzer will sound to remind you to stop applying force to avoid damage caused by excessive torque. The angle torque wrench provides 10 preset values, which can save the commonly used torque values and angle values, and can set the upper and lower limits of the torque value and angle value alarm, which is convenient and fast for daily use..
Four Measurement Modes: The 1/2 inch drive digital torque wrench has TRACK real-time mode and PEAK mode, torque mode (A1) and angle mode (A2). By quickly switching the four modes of A1&TRACK, A1&PEAK, A2&TRACK, and A2&PEAK, it can meet your dif....
TAGVIT Digital Torque Wrench (12.54-250.8 ft-lbs./17-340Nm), 1/2 Inch Drive Electronic Torque Wrench with Angle, ±2% CW Torque Accuracy with Buzzer and LED Flash Notification for Bike Motorcycle Car
Four Torque Measurement Units: This digital torque wrench can measure from 12.54-250.8 ft-lbs./17-340Nm, with easy to read LED display, available in Nm, Ft-lb, In.lb, Kgf.cm four measurement value switching, can adapt to the application of different torque unit measurement. The angle digital torque wrench has an accuracy of ±2% clockwise and ±3% counterclockwise. Comes with a calibration certificate and conforms to ISO 6789 and ASME B107.14M standards..
Buzzer & LED Indicator: When the set torque is reached, the 1/2 inch torque wrench will emit a flashing light, and the buzzer will sound to remind you to stop applying force to avoid damage caused by excessive torque. The angle torque wrench provides 10 preset values, which can save the commonly used torque values and angle values, and can set the upper and lower limits of the torque value and angle value alarm, which is convenient and fast for daily use..
Four Measurement Modes: The 1/2 inch drive digital torque wrench has TRACK real-time mode and PEAK mode, torque mode (A1) and angle mode (A2). By quickly switching the four modes of A1&TRACK, A1&PEAK, A2&TRACK, and A2&PEAK, it can meet your different needs and usage habits..
Two Way Use: By adjusting the direction button on the head of the electronic....
