Best Gpu Mining Motherboard

Ubit 6 Pack PCI-E Riser Express Cable 16X to 1X ( Dual-6pin / MOLEX) with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm USB 3.0 Cable

  • STABLE and SAFE: 4 Solid Capacitors deliver power to Graphics stably and safely..
  • STABLE CABLE: 60cm USB 3.0 cable, very soft and easy to place and route. Cable with shield net inside is more stable for mining. PCI-E 1x to 16x powered riser adapter card with multi-layer shielded wire will not weaken the signal within 3 meters..
  • VER 009S: Version 009S riser kits are the newest and top of the line solution for setting up GPU mining rigs..
  • REDUCE MOTHERBOARD BURDEN: 4PIN, and two Graphic card 6PIN interface (two 6PIN interface directing differently) are optional to power, which provides Graphic card independent power and reduces motherboard burden when using more Graphic cards..
  • WIDELY APPLICABLE: Suitable for all Window systems, LINUX and MAC..
Check Stock

HUAXUCHENG BTC-X79-5 Card GPU Full Mining Machine Used to Build The Mining System of Bitcoin Mining Machine and GPU Mining Machine Including Motherboard CPU SSD RAM.PSU Mining Machine

  • Please note: BTC-X79-5 card miner includes: Intel CPU, 128GB SSD, 4G memory, 1800W power supply (super static power supply), fan (silent fan), frame,....
  • The 3060 graphics card has a single card computing power of up to 48MH/s or more, which perfectly supports graphics card mining ETH, which greatly....
  • The motherboard of the BTC-X79-5 card mining machine adopts the H61 chip and a single channel 2011 socket CPU. Design 5 Pcie3.0X8 interfaces. GPU port....
  • If you want to use other CPUs, please use CPUs below Intel E5-2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2.
  • Designed specifically for cryptocurrency mining-Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin, etc. When the BTC-X79-5 card mining machine is....
Check Stock

SUOHUI Complete GPU Mining Rig for Ethereum Classic ETC/ETH/RVN/Flux/Rego with 8 GPU Mining Motherboard,PSU,RAM, SSD, Open Frame Mining Machanie(ExcludingGPU/1 Layer Miner)

  • 【Preinstalled Mining hardware】Miner comes with a mining motherboard, PSU, cooling fans, 128GB SSD, 8GB RAM, CPU, and Win10 OS(not activated). Our mining rig has a complete installation that all components have passed the inspection of technicians and assembled before sending out, which can reduce the defective rate of electronic components and improve the product quality. Easy start in minutes! Note: NOT include GPUs..
  • 【Professional Mining Power Supply】 1800W full voltage power supply allows to mine at home easily. The 10 customized long-line power cables directly power mobo and each graphics card without an adapter cable, avoiding burning the card due to poor contact, providing the best security for your mining..
  • 【4*4500 RPM Silent Cooling Fans】The mining machine has 4 powerful GPU cooling fans with a fan speed controller. Controllable win speed allows accelerating airflow flexibility for optimal cooling. Equipped with the bottom plate to prevent turbulent airflow and achieve excellent efficient heat dissipation..
  • 【Stackable Open-air Mining Frame】: This mining frame is made of high-quality material, reinforcing the mobo with14 screws to protect it from being over shaped. The open-air frame ensures that the graphics card is not limited i....
Check Stock

Ubit 【6PCS】 PCI-E Riser for Bitcoin Litecoin ETH Coin Mining 6PIN Powered PCIE Extension Cable GPU Riser Ethereum Mining ETH GPU Extension Cable PCIEX1 to PCIE X16 GPU Riser

  • 【Anti-interference metal shell】PCI Express risers extend the mother board PCIE X1 slot to PCIE X16 slot. Provding a safe and reliable connectivity with more PCIE X16 graphic cards. Used on Ethereum Mining rigs or GPU Mining rigs mainly. X16 GPU slot come with Anti-interference metal shell make sure data transmission..
  • 【8 Capacitors,More safety】Designed 4X high performance solid capacitors,2X voltage transformer and 2X Inductance to make sure voltage and current supply stable.Twice more than other version. Build in electric circuit protector keep device away from over current, over heat and over voltage..
  • Packed 23.6-inch USB 3.0 extension cable for flexible Graphic card connectivity..
  • Graphic card 6PIN interface provides Graphic card independent power and reduces motherboard burden when using more Graphic cards..
Check Stock

Dracaena 2 Pack PCIE Riser Adapter Card for GPU Crypto Mining16X to 1X (6pin/ MOLEX/SATA Powered) LED Status + 60cm USB 3.0 Cable(GPU Ethereum Mining)

  • Mainly designed for GPU Mining (Ethereum) rigs..
  • 60cm USB 3.0 extension cable for flexible Graphic card connectivity.
  • Extend PCI Express X1 slot from motherboard to PCI Express X16 slot.
  • Power Supply Options: PCIe 6pin, Molex, SATA.
  • 3 Solid Capacitors improve power stability to GPU and prevent interference. Coil unit added for absorbing electromagnetic wave.
Check Stock

SUOHUI GPU Mining Rig Case for ETC AE Beam CFX ERG RVN SERO GRIN Crypto Miner Complete Mining System with 8 GPU Mining Motherboard PSU Cooling Fans RAM SSD CPU Excluding GPUs -Black

  • ◀ Complete Installation, Start in Minutes: This GPU miner has installed high-quality mining hardware (without GPU) and Win10 English version....
  • ◀ Ultra-quiet Mining Power Supply: Built-in 4U 1800W full-voltage power supply, 110V-220V universal output to meet the use of different voltage....
  • ◀ 8 Controllable Cooling Fans: With each 4 cooling fans installed on the front and rear, the mining case fully allows the cold air in and hot air....
  • ◀ High-quality Mining Sever Case: The mining rig adapted sturdy and durable steel material to protect the GPU and electronic accessories. High....
  • ◀ SUOHUI GPU mining rig case complete system supports mining cryptocurrency like Ethereum Classic ETC/ETH/Flux/Render Network/Akash Network/XRP and....
Check Stock

PCI-E Riser Express Cable 16X to 1X with 4pin Power Graphics Extension Ethereum ETH BTC Mining Powered Riser Adapter Card+60cm USB 3.0 Cable (4P)

  • PCI-E riser 4Pin molex,gold plated contacts for better connectivity and long life,and with side clip to fasten other card. No driver needed,slot with a fixed buckle, easy to remove the card and fi,xed , so that the card will not fall off from the slot.The top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large rack based miners, and securing your investment..
  • 60cm USB 3.0 riser cable enabling flexibility in the placement of your PCI-E devices. Wire is relatively soft, easy alignment, easy to install in the main box..
  • PCI-E with multi-layer shielded wire, the longest can be connected to 3 Meter and will not attenuate the signal.PCI-E plug all gold-plated, more wear and increase the conductivity.PCI-E riser 4pin,gold plated contacts for better connectivity and long life,and with side clip to fasten other card..
  • Transfer card with SATA 15PIN interface to enhance power supply, so that the card from the motherboard independent of the board, so as to reduce the burden on the motherboard to accept the card..
  • Compatible with 1x,4x,8x,16x PCI-E slot of the motherboard,dedicated for bitcoin mining..
  • Note:If you have any questions,please contact us asap,and we will try our best to help you.
Check Stock

Mining Motherboard BTC-S37 Mining Machine Motherboard CPU Kit 8 GPU Slots DDR3 Memory Integration VGA Interface

  • [Mine Motherboard ] BTC-S37 Mining Machine Motherboard is a motherboard CPU set for mining machines, with the characteristics of low power consumption, low heat generation, energy saving and power saving. The actual work done for you is lasting and beneficial..
  • [Stable Voltage ] Our motherboard has stabilized capacitors that can provide a stable voltage for your electrical equipment..
  • [Safe and Silent] It can ensure silent performance, low power consumption, reduce heat generation, energy saving and safe use..
  • [Memory and Storage Space] Memory slot, 8 graphics card plug. The actual work done for you is lasting and beneficial..
  • [Package Included] 1 x mining machine motherboard CPU set (excluding mining machine)..
Check Stock

8 GPU Mining Rig Case - 4U Rack Mount Miner Server Chassis Frame (8 Graphic Card Slots) 19' Rackmount Computer Cabinet Enclosure w/ 6 Fans - Support ATX M/B & Power Supply; 1x 3.5 HDD - Tupavco TP1846

  • [Rackmount] TP1846 is a crypto mining rig case server chassis that can be mounted on a standard 19” server rack. Dimensions are 19″ x 4U x 25.6″ Deep (485 x 177 x 650mm)..
  • [ 8 GPU Slots] This chassis is designed for 8 GPU Graphics Cards (NOT INCLUDED) and 6 colling fans (INCLUDED) with additional space for 2 fans that can be attached to the back of the rig..
  • [Sturdy Mining Case] Industrial chassis miner rig is constructed from Heavy-duty and anti-rust SGCC steel, with a thickness of 1.2mm. Made to protect your valuable hardware..
  • [Compatibility] Support (NOT INCLUDE): ATX and microATX motherboard, with room for one HDD or SSD (3.5” or 2.5”).
  • standard PS-2 ATX or Mini-redundant power supply. Front: Power switch.
  • [Contents] Products containing high-quality chassis and fans only, GPUs, PSU or any other components are not included with purchase. The case is preassembled..
Check Stock

YEECHUN 6 Pack VER009S PCI-E Riser Card PCIe 1x to 16x USB 3.0 Data Cable Graphic Extension for Bitcoin GPU Mining Powered Riser Adapter Card,60cm USB 3.0 Riser Cable

  • PCE-VER009S: This PCI-E GPU extender features gold-plated contacts and has good performance.
  • it can be used for a long time. Mainly designed for Ethereum mining equipment or more GPU mining equipment. And it is suitable for all Window systems, LINUX and MAC..
  • Stable and Safety: There are 4 capacitors on this PCI-E 1X to 16X board to make the power supply stable and secure.60cm USB 3.0 cable, very soft and easy to place and route..
  • Convenience And Help: 4PIN, and two Graphic card 6PIN interface (two 6PIN interface directing differently) are optional to power, which provides Graphic card independent power and reduces motherboard burden when using more Graphic cards..
  • What You Get 6X PCI Express Riser Boards 6X 23.6in/60cm USB 3.0 Extension cables 6X 15Pin SATA to 6Pin Power Cables 6X PCI Express X1 Gold Plate Contracts..
  • After Service: We provide 90 days worry-free warranty. For any reason, you’re not completely satisfied, we’ll provide a refund or replacement package.
Check Stock