PXY-ELEC Complete Mining rig System. BTC-X79-5 Mining Motherboard 5 PCI-E 3.0 Graphics Card Slots, Including CPU, SSD,(8G) RAM, PSU, Support 3060GPU Full Speed ETH Miner (Without GPU 8G RAM)
BTC-X79-5 card mining machine is optimized for 3060 LHR v1, and the single card computing power of 3060 graphics card is as high as 48MH/s or more. The noise during operation is around 55db. It runs very quiet, very suitable for home use ，X79-5 card mining machine motherboardsupports RTX3060TI, 3070 3080, 3090, 6800/6800XT, 6900/6900XT and other graphics cards.
This is a complete set of miners (note no GPU), it already contains: x79 motherboard, intel 2609 v2 CPU, 8GB RAM, 128GB SSD, 1800w power supply, 6 PIN cable to (6+8) Pin*5pcs, 3 Fan, metal frame. Lifting kit, only need to prepare graphics card, monitor, mouse, keyboard to run..
X79-5 card mining machine main board adopts H61 chip, single-channel 2011 socket CPU. Design 5 Pcie3.0X8 interfaces. GPU Port Clearance: The port clearance between GPUs is 60mm. Note the width of the graphics card. When using hiveos to start, enter the BIOS to set the U disk to start, wait 2-3 minutes, and then enter the system. (The display is black at this time, which is normal.).
If you want to use other CPUs, please use CPUs below Intel E5-2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2, etc. You can also install additional layers, each miner is equipped with parts.
IIAzimps PCI-E Riser Card 010S 8 Solid Capacitors GPU Risers Adapter Card PCI-Express 1X to 16X Riser Card for Bitcoin Ethereum Mining BTC ETH Miner Rig (3 Pcs Pack)
Upgraded Version: The 010S PCI-E risers card is the newer upgraded version of the GPU risers 009S, expand the motherboard PCIE 1X to PCIE 16X slot, use gold plated contacts to ensure flawless connectivity and long life. Mainly designed for Bitcoin Ethereum Crypto Mining rigs and other GPU mining equipment..
More Stable and Secure: The graphics card power supply adopts 8 solid capacitors to ensure the graphics card mining stably and secure..
Multi-interface Design: 4PIN+6PIN interface design, With SATA 15pin Male to 4pin/6pin power cable, makes the graphics card power independent of the motherboard to reduce the burden on the motherboard when connecting multiple graphics cards..
Thoughtful Design: The PCI-E USB 3.0 cable uses multi-layer shielded wire, which can be connected to a maximum of 3M without attenuating the signal. 6 marquee LED lights display working status. The graphics card slot is metal shielded to prevent interference and with a fastening buckle, which provide a firmly connect..
Wide Compatibility: This GPU riser kit is compatible with 1x, 4x, 8x, 16x PCI-E slot of th....
MANMEI Open Air 8 GPU Mining Rig Frame for Crypto Miner Stackable Ethereum Mining Machine 1800W Power Supply 110V-264V 8 GPU Motherboard with CPU & 128GB SSD & 8G RAM & 4 Fans Without GPU
Mining Rig Complete System: MANMEI mining rig is designed for crypto mining – Ethereum Classic, ETH, Litecoin, Dogecoin, Monero, Zerocoin, Ripple....
110 - 264V Voltage Power Supply: Built-in 1800W PSU is specially designed for mining rig with up to 90% conversion efficiency. Wide voltage range....
8 GPU Ports Mining Motherboard: Specially designed B85 mining motherboard allows you to put at most 8 Pcs graphics cards in the mining rig at same....
Easy & Quick Installation: With prebuild design, MANMEI B85 frame type mining machine is easy and quick to assemble. Compared with other mining rig....
Mining Rig System Including: B85 motherboard with CPU, 1800W Supply Power (110V - 264V input ), 128GB SSD, 8G DDR3 RAM, 4 PCS 4500 RPM Adjustable....
PCIE Riser Cable VER006C,GPU Risers for Mining Rigs,GPU Extension Cable,GPU Crypto Currency Mining Cable with 6Pin-SATA Power Cable and 23.6in Extension Cable,Extend PCIE X1 to PCIE X16(PCE-VER006C)
1.GPU Currency Mining Risers: PCE-VER006C is a premium quality PCIE riser cables for Bitcion, Ethereum GPU Mnining Rigs..
2.Enough Power Supply: PCI Express Risers equipped with 20cm (11.81in) SATA to 6Pin power supply cable give GPUs sufficient power supply. Make sure GPUs works in high performance all the time..
3. Expand to PCIE X16: This PCIE riser will extend PCIE X1 from mother board to external PCIE X16 slot for air cool GPU Mining rigs..
4. Safety and Stable Risers: 3X solid capacitors,1X volatge transformer and 1X onductance inductance will prevent PCI Express Device over current,over voltage and over heat..
5. Flexible GPU Connection:60cm/23.6in fully shielded USB 3.0 cable will extend PCIE signal out with little signal loss.Long enough extendsion cales will let user easy to place GPUs..
seeed studio - Grove - HCHO Sensor (Semiconductor VOC Gas Based WSP2110)
【Powerful and Compact】Jetson Mate is a carrier board which can install up to 4 Jetson Nano/NX SoMs. There is an on board 5-port gigabit switch enabling the 4 SoMs to communicate with each other.
【Easy to build and config】One master node with 3 worker nodes with the ability to power on/off the worker nodes separately.With one 65w PD power adapter and 1 ethernet cable, developers can easily build their own Jetson Cluster.
Are you a cryptocurrency miner? this awesome unique and futuristic. Or get it as a gift for that friend who is a crypto maniac and has a gigantic rig of gpus mining some altcoins who would love this! bitcoin, ethereum, litecoin, altcoin miner..
Make sure you get the perfect size for you to keep mining with this Crypto Miner clothing. Wear while day trading BTC, ETH and LTC. You'll be has hot has your gpu rigs. Keep mining altcoins and make blockchain safer..
Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Professional Mining GPU Hanger Frame for Wire Rack Pack of 8 High Temp
PROFESSIONAL VARIATION - Heat resistant for complete open air system and for enclosed systems!.
SIMPLE and CONVENIENT - Compatible with almost all wire racks.
EASY TO INSTALL - This mining bracket is easy to install and is structurally strong. Keep your mining machine organized without spending a fortune on....
Full kit includes set of 8 screws and 8 hangers..
NOTICE - GPU's with DVI ports may experience compatibility issues. This mining rig bracket is the Bracket Only, does not include Fans or other CPU,....
PXY-ELEC Complete 8GPU Mining rig System. B85 Full Mining Machine Includes Mining Motherboard ,CPU,(256) SSD,(8) RAM and PSU.Used for Build GPU Frame Mining rig ETH Miner(Without GPU)
B85 miner is a standalone mining system that supports AMD/NVDIA GPUs . Including: mining machine motherboard, Intel CPU 1840/1820 (with CPU cooler), SSD (256GB), RAM (8G), PSU (1800w), 4 fans (silent), single metal frame, only need to prepare graphics card and monitor , mouse, keyboard run.
B85 rack-mounted mining machine, professional silent design, accelerated air convection, excellent heat dissipation design. Noise: 26.65 (dB-A) or lower, [1800w silent power supply]: The power input voltage is AV 110-230V, and the power conversion efficiency is as high as 92%, allowing you to enjoy the fun of electricity while mining..
The B85 rack-mounted miner is made of steel and iron, and the length of the graphics card is not limited. If you have purchased multiple miners of the same model, the B85 can be equipped with an additional layer (with support columns).more space-saving and organized. It is recommended not to exceed 4 layers.
The GPU interface spacing is about 65mm, enough spacing to ensure good heat dissipation is a necessary condition for mining any cryptocurrency such as Bitcoin (BTC) and Ethereum (ETC), but also please note that the width of your GPU should not exceed 65MM, otherwise Cannot install 8 GPUs.
2000W Mining 2U Single Channel Power Supply, 110-230V Ethereum PSU for 8 GPU ETH Miner Rig Case
【2000-2500W Mining Power Supply】 The mining power supply is mainly designed for cryptocurrency mining. The power supply has ten 6 pin power leads. Note: The power supply cannot be used for ASIC miners with protocols or software..
【Single channel PSU parameters】 The miner PSU can be used in 110V-230V. Input AC110V output rated power is 2000W. Input AC220V, the output rated power is 2500W. Power efficiency is 80% at 110V, Power efficiency is 90% at 220V. Please reasonably calculate the consumption of the GPUs, and reserve 300-400W for the motherboard and other cable consumption..
【Support 6-8 GPU graphics card】 Built in 60mm diameter cooling fan, with speed up to 12000 rpm, Which is conducive to heat dissipation. But the sound will be loud decibel: about 65-69 DB at no load. Support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPUs simultaneously. We recommend running 6 cards of 3080/3090 without overclocking the GPU..
【Package】 Include 1.2m power cord, cable tie, screw. Over voltage protection, overloading protection, short circuit protection..
