Best Gpu Riser Cable Pcie 0

EZDIY-FAB New PCI Express 16x Flexible Cable Extension Port Adapters, High Speed PCIE Riser Cable 90 Degrees, Fit with FD R6 Case -20cm

  • New design with vertical 90 degrees connecter for any types to mounting GPU.
  • High Quality Solder Points and Gold plated Contacts for the Best Conductivity and Long Use.
  • Extremely High speed cable allow PCI express video card in any direction on suitable position.Supports PCIE3.0/2.0/1.0, Doesn't Support PCIE4.0, Don't bend cable excessively, which will cause poor signal..
  • Foiled cable for High-frequency impedance and EMI design/ Golden plated contacts for best connectivity and long life.
  • Compatible with most GPU/motherboard components One year warranty, buy with confidence.
Check Stock

2 Pieces PCI-e PCI Express 36Pin 1X Extension Cable Riser with Gold-Plated Connector (90 Degree 20 cm)

  • ...elp of this PCI Express 36Pin 1X extension cable, you can move it from the motherboard to the invisible part of the PC case, add an expansion card in the slot blocked by the CPU cooler, which can well hide your wireless module, holding a decorative and practical functions with a four-port SATA card.
  • Works well: this riser cable is reliable and serviceable, and you can bend the end of the port that goes into the motherboard 90 degrees without the connector breaking or losing continuity, which will give you a lot of convenience and it works well with no loss of quality.
  • Reliable and reusable to use: these pcie cable extensions are designed in quality cable material, soft and reliable, and easy for you to install in a 1U/2U case at any angle, experienced design and reliable materials for high frequencies and low attenuation, which will be a nice accessory for you.
Check Stock

OwlTree Braided 20cm Graphics Card GPU Female 8 Pin to Dual 8 Pin 6+2 Pin Male Splitter PCI-E PCIe Power Cable 18AWG 20CM with Sleeve

  • Connector A: GPU PCIe 8 Pin female, Connector B: 2 x 8(6+2)pin PCIe Male.
  • Material: Made from High Quality Tinned Copper 34*0.178TS, 1007 18AWG.
  • Advantages: the cables are made from multiconductor cable, Tinned Copper.it is more resistant to oxidation, and support large currents, It is more stable to power the computer hardware.
  • Note: the cable is GPU 8Pin Not CPU 8Pin, please noted that before place order..
  • Quantity:2 pcs Braided 8 PIN PCIE Splitters included.
Check Stock

OwlTree 6 Pack Braided Graphics Card GPU Female 8 Pin to Dual 8 Pin 6+2 Pin Male Splitter PCI-E PCIe Power Cable 18AWG 20CM with Sleeve

  • Connector A: GPU PCIe 8 Pin female, Connector B: 2 x 8(6+2)pin PCIe Male.
  • Material: Made from High Quality Tinned Copper 34*0.178TS, UL1007 18AWG.
  • Advantages: the cables are made from multiconductor cable, Tinned Copper.it is more resistant to oxidation, and support large currents, It is more stable to power the computer hardware.
  • Note: the cable is GPU 8Pin Not CPU 8Pin, please noted that before place order..
  • Quantity:6 pcs Braided 8 PIN PCIE Splitters included.
Check Stock

EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- Black

  • New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots..
  • High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape..
  • Vertical GPU Bracket with ARGB LED lighting effects, Synchronizable ARGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 Pin ARGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED..
  • Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles..
  • Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis..
  • Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800..
Check Stock

EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- White

  • New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots..
  • High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape..
  • Vertical GPU Bracket with ARGB LED lighting effects, Synchronizable ARGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 Pin ARGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED..
  • Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles..
  • Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis..
  • Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800..
Check Stock

Cable Matters 2-Pack 8-Pin PCIe to Molex (2X) Power Cable 4 Inches

  • PCI express power cable adapter connects a PCIe video card with an 8 pin connector to a power supply with two spare L4 Molex power connections.
  • Check that your PSU is rated to power the video graphics card.
  • PSU upgrade saver power cable provides an option for a power supply without a PCIe connection for GPU power.
  • Dual Molex connectors are designed to connect to separate rails on different Molex daisy chains to power a PCIe video graphics card from an older PSU.
  • 8 pin PCIe to Dual Molex female to male cable provides a convenient solution for video graphics card power with two Molex connectors for GPU cards that require more power.
  • Sturdy graphics card power cable has male Molex connectors and a female PCI connector with a latch to prevent accidental disconnections.
  • Video graphics card compatible with graphics cards from popular manufacturers such as EVGA GeForce, Gigabyte, Sapphire, and XFX.
Check Stock

Ziyituod 6 Pack PIC-E Riser Express Cable VER010S GPU Riser Express Kits ,with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm USB 3.0 Cable

  • 【VER010S-Plus】VER010S-Plus Version PCIe riser kit are the best solution for setting up Ethereum/Bitcoin and other GPU mining rigs..
  • 【Stable and Safe】: The graphics card power supply adopts 8 imported large solid capacitors to make the graphics card power supply more stable and safe..
  • 【Riser Adapter Card】: Two 6PIN+MOLEX interface to enhance the power supply capacity, so that the power supply of the graphics card is independent of the motherboard, thereby reducing the burden on the connection between the motherboard and multiple graphics cards..
  • 【Rugged Cable】: The PCI-E connector uses multi-layer shielded wire, which can be connected to up to 3M without signal attenuation. The 60CM USB cable is soft and stable, and the graphics card can be placed at will..
  • 【WIDELY APPLICABLE】: Suitable for all Window systems, LINUX and MAC..
Check Stock

COMeap CPU to GPU CPU 8 Pin Female to Dual PCIe 2X 8 Pin 6+2 Male Splitter Cable for Graphics Card BTC Miner 9-inch 23cm Pack of 2

  • 『CPU 8P Female - Dual 8P(6+2) Male』CPU 8 pin female end to connect to the CPU 8 pin power cable of your power supply and two 8 pin(6+2) male ends....
  • 『Compatibility』Compatible with 6-pin & 8-pin graphics cards from popular manufacturers such as: ASUS, ASRock, EVGA, Gigabyte, Radeon, Sapphire,....
  • 『Only Designed for GPU』This cable is only designed for graphics vedio cards, it does not work with motherboards. If you connect it with the....
  • 『Note』This is CPU 8-Pin to dual PCI-E 8-Pin Splitter Cable(CPU to GPU),NOT a 8-pin PCIe to 2x PCIe 8 cable (GPU to GPU), both look very similar.
  • 『Parameter』Length(including connectors):9-inch(23cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Self-adhesive tape*1pcs.
Check Stock

(2-Pack) COMeap GPU PCI Express Power Extension Cable PCIe 8 Pin Female to 8 Pin(6+2) Male Adapter 9-inch(23cm)

  • 『Solution』Providing a convenient solution for extending the connection length from PCIe cable to GPU.
  • 『PCIe 8P Extension』PCIe 8 pin female end to plug into the PCIe 8 pin male connector of PCIe cable and 8 pin(6+2) male end to plug into the video graphics card (8 pin (6+2) end could be used as 6 pin or 8 pin end by sliding on/off the 2 pin).
  • 『Compatibility』Compatible with 6-pin & 8-pin graphics cards from popular manufacturers such as: ASUS, ASRock, EVGA ,Gigabyte, Radeon, Sapphire, NVIDIA Tesla, etc..
  • 『Parameter』Length(including connectors): 9-inch(23cm), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 2pcs, Self-adhesive tape*1pcs.
  • 『Note』This cable was only designed for graphics card (GPU), not motherboard or CPU. It will be damaged and burned once you connect it to motherboard or CPU and we won’t take any responsibility for wrongly using or installing. Please contact us if you have any questions.
Check Stock