Best Graphics Card Heatsinks

Cable Matters 2-Pack 6 Pin to SATA Power Cable (SATA to 6 Pin PCIe) - 8 Inches

  • PCI express video card power cable adapter connects a PCIe video card to a power supply with a spare SATA power connection.
  • PSU upgrade saver power cable provides an option for a power supply without a PCIe connection as a GPU power cable.
  • 6 pin PCIe to 15 PIN SATA female to male cable provides a convenient solution for low power video graphics card that can be powered from a single SATA power connection.
  • Sturdy graphics card SATA to 6 pin power cable has a male SATA connector with keyed rails.
  • An integrated latch on the female PCIe power cable connector prevent accidental disconnections.
  • Video graphics card compatible with graphics cards such as the EVGA GeForce GTX 1080 Ti / GeForce GTX 750 Ti / GeForce 1070 Ti for a PCIe to SATA power connection.
Check Stock

NulSom Inc. 40p to 40p GPIO Ribbon Cable for Raspberry Pi 4/3 / Zero / 2 (8" 20cm)

  • 4 layer Raspberry Pi 3 B+ Case - Specially designed for the 2018 new version Raspberry Pi 3 Model b+, and compatible with Pi 3B 2B (Not include Pi Board).
  • Fans & Heatsinks Cooling - With DC 5V quiet fan and a set of Aluminum heatsinks to keep raspberry pi cool..
  • Easy to access to all GPIO ports - 4 layers Acrylic case allow you use all ports of pi and won't block signal and perfectly protect your pi components..
  • Convenient to turn on/off pi - Power Cable w/ on off switch button, easy to press button to power on your pi..
  • Easy to install with Instruction manual. Package include: 4 layer dark brown Case, 4pcs rubber feet, 3pcs Aluminum Heatsinks, 1pc Power Supply Adapter(5V/2.5A , Cord length: 59 inch), 1pc Mini Fan and 1pc Phillips Screwdriver..
Check Stock

Ziyituod 6 Pack PIC-E Riser Express Cable VER010S GPU Riser Express Kits ,with Led Graphics Extension Ethereum ETH Mining Powered Riser Adapter Card+60cm USB 3.0 Cable

  • 【VER010S-Plus】VER010S-Plus Version PCIe riser kit are the best solution for setting up Ethereum/Bitcoin and other GPU mining rigs..
  • 【Stable and Safe】: The graphics card power supply adopts 8 imported large solid capacitors to make the graphics card power supply more stable and safe..
  • 【Riser Adapter Card】: Two 6PIN+MOLEX interface to enhance the power supply capacity, so that the power supply of the graphics card is independent of the motherboard, thereby reducing the burden on the connection between the motherboard and multiple graphics cards..
  • 【Rugged Cable】: The PCI-E connector uses multi-layer shielded wire, which can be connected to up to 3M without signal attenuation. The 60CM USB cable is soft and stable, and the graphics card can be placed at will..
  • 【WIDELY APPLICABLE】: Suitable for all Window systems, LINUX and MAC..
Check Stock

Yeston GeForce GT730 4GB DDR3 Graphics Cards Nvidia PCI Express 2.0 Desktop Computer PC DVI-D +VGA+ HDMI-Compatible Video Gaming Graphics Card

  • Graphics card with unified shader: 384, Core frequency: 902MHz, Video memory frequency: 1333MHz Video memory capacity and specification: 4G / 64bit / DDR3.
  • Low profile graphics card with 3D features: DirectX 12 / OpenGL 4.6, OS features: Windows XP/7 / 8 / 10 Bus interface: PCI Express 2.0.
  • PC graphics card output interface: DVI-D +VGA+ HDMI-compatible, External power supply: None.
  • Recommended power supply: rated above 250W.
Check Stock

GeeekPi 102pcs Heatsink Kit with Conductive Adhesive Tape, Cooler Heat Sink Cooling Raspberry Pi VRM VRAM CPU GPU VGA Small IC Laptop LED MOSFET Transistor SCR Voltage Regulator

  • Well Packaged - With a storage box for 102pcs heatsinks, it perfectly divides the heat sinks into 17 categories..
  • Multiple applications - It can Cool Raspberry Pi VRM VRAM CPU GPU Small IC Laptop 3D Printers Stepper Motor Modules TMC2130 TMC2100 A4988 DRV8825 TMC2208. Multiple sizes, multiple application scenarios..
  • Good heat dissipation effect - Various Aluminum and Copper heat sinks with Thermal Conductive Adhesive Tape for cooling Raspberry Pi 4 and electronics components..
  • Different Sizes - 102pcs multicolor heatsinks in different sizes contains 92pcs aluminum heatsink and 10pcs copper heatsink..
  • Package Includes: 102pcs multicolor heatsinks, 1x Storage Box..
Check Stock

PXY-ELEC Complete Mining rig System. BTC-X79-5 Mining Motherboard 5 PCI-E 3.0 Graphics Card Slots, Including CPU, SSD,(8G) RAM, PSU, Support 3060GPU Full Speed ETH Miner (Without GPU 8G RAM)

  • BTC-X79-5 card mining machine is optimized for 3060 LHR v1, and the single card computing power of 3060 graphics card is as high as 48MH/s or more. The noise during operation is around 55db. It runs very quiet, very suitable for home use ，X79-5 card mining machine motherboardsupports RTX3060TI, 3070 3080, 3090, 6800/6800XT, 6900/6900XT and other graphics cards.
  • This is a complete set of miners (note no GPU), it already contains: x79 motherboard, intel 2609 v2 CPU, 8GB RAM, 128GB SSD, 1800w power supply, 6 PIN cable to (6+8) Pin*5pcs, 3 Fan, metal frame. Lifting kit, only need to prepare graphics card, monitor, mouse, keyboard to run..
  • X79-5 card mining machine main board adopts H61 chip, single-channel 2011 socket CPU. Design 5 Pcie3.0X8 interfaces. GPU Port Clearance: The port clearance between GPUs is 60mm. Note the width of the graphics card. When using hiveos to start, enter the BIOS to set the U disk to start, wait 2-3 minutes, and then enter the system. (The display is black at this time, which is normal.).
  • If you want to use other CPUs, please use CPUs below Intel E5-2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2, etc. You can also install additional layers, each miner is equipped with parts.
Check Stock

Gigabyte B550M AORUS PRO-P (AMD Ryzen 5000/B550/Micro ATX/M.2 Thermal Guard/HDMI/DVI/USB 3.2 Gen 2/DDR4/Motherboard)

  • Supports AMD 3rd Gen Ryzen and 3rd Gen Ryzen with Radeon Graphics Processors.
  • Dual Channel ECC/ Non-ECC Unbuffered DDR4, 4 DIMMs.
  • 10 plus 2 Phases Digital Twin Power Design with 50A DrMOS.
  • Advanced Thermal Design with Enlarged VRM Heatsinks.
  • Dual Ultra-Fast NVMe PCIe 4.0/3.0 x4 M.2 with One Thermal Guard.
  • AMP-UP Audio with ALC1200 and premium capacitor.
  • Blazing Fast 2.5GbE LAN with Bandwidth Management.
  • DisplayPort and HDMI for Multiple Display.
  • RGB FUSION 2.0 Supports Addressable LED and RGB LED Strips.
Check Stock

Cable Matters 2-Pack 6 Pin PCIe to Dual SATA Power Cable 4 Inches, 2X SATA to 6 Pin PCIe

  • PCI express power cable video card power cable adapter connects a PCIe video card to a power supply with two spare SATA power connections.
  • PSU upgrade saver power cable provides an option for a power supply without a PCIe connection for GPU power.
  • 6 pin PCIe to dual 15 pin SATA female to male cable provides a convenient solution for video graphics card power with two SATA connectors for GPU cards that require more power.
  • Sturdy graphics card power cable has male SATA connectors with keyed rails and a female PCI connector with a latch for a secure connection on each end to prevent accidental disconnections.
  • Video graphics card compatible with graphics cards from popular manufacturers such as GeForce GTX 750Ti, EVGA GeForce GTX 750 Ti / GT 740 / GTX 950 / GTX 960 / GTX 980Ti, Gigabyte GeForce GT 610/ GTX 750 / GV-N950OC-2GD / GTX 750 Ti / GV-N75TOC2-2GI, Sapphire Radeon NITRO R9 380, and XFX RADEON R9 290.
Check Stock

GeeekPi Raspberry Pi 4 8GB RAM Starter Kit with 64GB Micro SD Card Nes4Pi Case 5V 3A USB-C Power Supply 2PCS Game Controllers Heatsinks Cooling Fan Micro HDMI Cable and SD Card Reader

  • 【Raspberry Pi 4 Model B 8GB Retro Gaming Kit】1.5GHz 64-bit quad-core ARM Cortex-A72 CPU ( ARM v8, BCM2711B0),8GB RAM (LPDDR4),On-board Bluetooth....
  • 【Great Retro Gaming look and feel】Includes 2 Classic USB SNES style Gamepads & Pi 4 Compatible NES style Case with ease of access to all Ports..
  • 【Equipped with Raspberry Pi 4 Heatsink Fan】Built-in 3510 fan can help raspberry Pi 4B cool down during you play games, 4 heatsinks for impeccable....
  • 【64GB Class 10 GeeekPi Micro SD Card】 64GB Class 10 Micro SD Card with SD card Adapter. It also comes with a micro SD card reader which is easy to....
  • 【USB-C Power Supply With On/Off Switch】With Professional Certification: FCC, TUV, RoHS Certification.
Check Stock

Retroflag SuperPi 4 Case, Pi 4 SuperPi JCase with Functional Power and Reset Buttons, Raspberry Pi 4 Case with Fan and Raspberry Pi Heatsinks for Raspberry Pi 4 Model B

  • The SuperPi 4 Case is specifically designed for Raspberry Pi 4 Model B.
  • Easy access to the SD Card slot and all other ports without opening the case.
  • Designed the case for storing your SD cards in the appearance of a game cartridge to give it the holistic look when put on top of SuperPi 4 Case..
  • We created this Pi case applying the most iconic element in the retro game world as a homage to the most classic console ever made..
  • Package Includes: 1x SUPERPi 4 CASE (new) ,1x SD Card Case, 1x Cooling Fan, 1x 4pcs of Heatsinks, 1x Flannel Bag, 1x Srewdriver,1x Instruction.
Check Stock