SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS
【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft
【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided
1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
American Valve P200 1/2\ PVC Ball Valve IPS Schedule 40, 1/2-Inch, White
Full Port: Double union/double slip ball valve block design permits in-line maintenance without disconnecting the pipe—full flow fluid handling characteristics for long-lasting, superior performance in the field..
Ease Of Use: PVC backwater valve with a quarter-turn operation for durable, superior performance in the field. Quick and easy disassembly without special tools..
Construction: Ball valve with female socket dimensions comply with ASTM F1498, EPDM O-rings and PTFE seats for long-lasting, superior performance..
Applications: True union ball valve can be used in water treatment, water features, fountains, aquariums, landfills, swimming pool as pool valves, power plants, mining, transportation and chemical processing..
100% Satisfaction Guarantee: If you are not satisfied, we offer a 30-day hassle-free return policy. No restocking charges, no hassle! We assure you that you will receive a product that is of high quality at an affordable price..
TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings
Fitment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 deg....
30 Rolls Thread Seal Tapes, Teflon Tape 1/2 PTFE Pipe Sealant Tape Industrial Thread Sealants Plumbers Thread Tape for Leak Water, Plumbers, Plumbing, Air Head, Thread Pipe, 1/2\ x394\ White
HIGH QUALITY:Thread seal tapes are made of PTFE which has a good sealing capability and can resistant corrosion. Plumbing pipe tape also has a good performance towards moisture and acids, they will not crack easily..
PACKAGE CONTENT:Each package include 30 rolls of thread seal tapes, size :1/2" in width, 393" long(10m ) each roll, 984ft in total. Enough for you to use a long time. You needn't have to buy again and again..
GOOD PACKAGE:Each roll of teflon tape has a plastic cover which can protect the tape from dust, when you finished your work, just place them back to the plastic cover, it is a better way to collect them compared to normal thread tape without plastic cover..
EASY TO USE:When you want to use them, just take out the tape from the plastic package, and wrap it around the tape or air head or some other thing that need this sealant tape, and then screw it in. As it is not sticky, so it is also easy fro you to remove them..
WIDE APPLICATION:Plumbers thread tape can be widely used not only in our home but also in industrial and commercial. They are suitable for leak water, plumbers, air head, air fitting, air compressor, thread pipe and other kind of things..
[Features]-PTFE can resist most chemicals, usually high temperature resistance, and has a low friction, non-stick surface, excellent electrical insulation properties, non-flammable, low water absorption..
[Function]-Used for chromatographic column packing and mixing beads, PTFE balls can reduce the bumps when corrosive reagents boil..
[Advantages]-Compared with other fluoropolymers (such as FEP and ETFE), PTFE can usually withstand higher temperatures..
[Temperature Resistance]-PTFE is inert to most liquids and vapors, and can be used from -100 degrees Fahrenheit to 545 degrees Fahrenheit..
[Wide Application]-PTFE balls are widely used in chemical, machinery, electronics, ball valves, electrical appliances, aerospace and other fields..
10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters
【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Furnrubden Misting Cooling System with Pump, Patio Misting System, 60.4FT Tubing +26 Brass Spray Nozzles, Outdoor Water Patio Misters for Outside Patio, RV Camper Marine Greenhouse, Fan, Trampoline
Misitng System Product List : 12V DC Fresh Water Pump + power supply+ 18M(60.4FT) Including - 3M（10FT）Misting Hose Supply +15M（50FT） assembled misting line with 26 brass misting nozzles.
60 cable ties + Instruction + 3/4inch Standard water tap adapter+1pc PTFE TAPE (If the power adapter or accessories are not configured, please contact us in time).
The parameters of micro pump: 12V 60W 5L / min, equipped with 12V 5A 60W AC DC power adapter.
(Its normal for pump to have water at the joint due to the test,when unpacking the package.).
Low pressure spray pipe fittings parameters: PE food grade materials, nozzle is made of brass, American standard size, orifice nozzle diameter: 0.4mm.
spray seat is sliding lock type fast push, can connect 1/4 inch pipe.
Uses: spray accessories are mainly used for spray cooling system, cooling, deodorization, humidification, watering, dust removal, gardens, irrigation systems, courtyards, gardens, swimming pools, playgrounds and so on. Working scene: shopping mall, park, artificial landscape, factory, workshop dry area, ....
UNIFORM PORE SIZE - PTFE Syringe Filter with uniform pore size, high porosity, and high retention efficiency..
PREMIUM PERFERMANCE - It Can be autoclave, sterilize at 121°C/249.8℉ for 45 minutes, it with broad chemical compatibility and strong chemical stability and inertia..
STURDY & DRUABLE - The syringe filters fit well, securely and durable, have reasonable flow for the filtration size, PTFE syringe filters are wall marked, when working with different requirements for filtration to be able to quickly discern which ones are being used..
APPLICATION WIDELY - PTFE Syringe filters are broadly used infiltration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions, perfect for hydrophobic, even such as culture medium, liquid cultures and grain spawn jars..
