10 Pcs Grease Gun Needle Tip of The Mouth, Removable Needle Grease Dispenser, 2.95 Inch Length Standard Grease Sharp Type Fitting, Grease Injector Needle for Use with Hand Operated Grease Guns
Package: 10 packs Needle Grease Gun Adapter..
For the finer machine, the needle tip is convenient to punch the butter in. Needle adapter for oil-filled or difficult-to-grease areas, suitable for tight spaces..
For use with most hand-operated grease guns and air-powered equipment..
The grease gun needle tip is suitable for use in ships, ferries, repair trucks, cars, workshops, machinery maintenance and more..
Worked great needle screws to grease gun so you don't loose grease greasing the joint, Makes it easy to grease wheel bearings..
GREASECO Molybdenum Grease | Extreme Super Duty Performance Calcium Sulfonate | Moly | 5th Wheel | Ball and Joint | Automotive | Single Grease Tube for Grease Gun | NLGI 2 | SuperDuty Moly
Calcium sulfonate complex moly grease fortified with molybdenum disulfide (Moly) designed for severe duty applications.
SuperDuty Moly grease is an excellent choice for construction equipment, including Caterpillar specifications, requiring moly grease for pin and bushing applications.
Applications include hydraulic shovels, bucket pins and bushings, bulldozers, drag lines, dump trucks and other heavy-duty equipment with heavily-loaded pivot pins, excavators, king pins, skid steers, wheel and track loaders.
Ideal for severe duty, heavy-load-bearing applications operating in the adverse conditions found in agricultural, steel, mining, construction, landscaping, logging and environments subject to water ingress.
Superior performance for fifth-wheel hitch plates, heavy-duty over-the-road trucks and trailers, king pins, municipal service vehicles, pivot pins, refuse haulers, sewer and septic trucks, snow removal vehicles, spring pins, steering linkages, universal joints, utility fleets, water pump bearings and other greased heavy-duty components, wheel bearings, demolition equipment, airport support vehicles and more..
The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle
Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Spitfire Classic Skateboard Bearings One Size Blue
BUILT IN FOR EASY INSTALLATION - Fireball Dragon Built In Bearings are designed for quick and simple installation on your skateboard or longboard, with reduced slop (bearing movement) and perfect alignment, eliminating the need for separate spacers and skateboard washers.
INCREASE YOUR PERFORMANCE - Dragon Bearings come with our signature Labyrinth Shield to keep dirt and debris out while offering maximum lubricant retention! See image for more info.
PRE-LUBRICATED FOR LONGEVITY - with our Dragon ENDURE grease for maximum longevity and all weather use. These bearings are built to perform day in, day out.
LIFETIME BEAST GUARANTEE - for peace of mind against manufacturing defects for the life of your bearing.
SET OF 8 608 BEARINGS - 1 Set is enough for 4 skateboard or longboard wheels. Specs - 22mm (outer diameter) x 7mm (width) x 8mm (inner diameter/axle) with built-in spacer measurements of 5.1mm and a 0.65mm speed ring..
The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle
Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".