Best Grey Iron ductile Iron

Martin JA 1 1/4 Quick Disconnect Bushing, Ductile Iron, Inch, 1.25\ Bore, 1.375\ OD, 1.06\ Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

RBCuZn-C - LFB Bare Bronze Brazing Rod - 36 x 1/8 1 Lb

  • LFB (bare low fuming bronze) is a general purpose oxyacetylene/brazing rod used for joining various ferrous and non-ferrous metals such as carbon steel, copper alloys, cast iron, malleable iron, stainless steel and some nickel alloys. Mechanical and physical characteristics include ductility, machineability, high strength, free flowing with good tinning action and a low melting point (1630°F).
  • A “must have” filler metal for every machine shop, LFB is excellent for building up wearing surfaces or large areas where successive layers must be added.
  • galvanized parts can be brazed without damaging the zinc coating. Precise balance of copper and zinc along with alloying elements of tin, iron, manganese and silicon produces weld deposits that can be easily machined but work harden once put into service.
  • READ THIS: Main image is for reference only. Please check Picture #2 for an approximate quantity of rods per pound***.
  • Available in different sizes: 0.045", 1/6", 3/32", 1/8", 5/32", 3/16" and 1/4".
  • Available in different package weights: 1 Lb, 2 Lb, 5 Lb and 10 Lb.
Check Stock

Martin J 100MM Quick Disconnect Bushing, Ductile Iron, Metric, 100 mm Bore, 130.75 mm OD, 114.3 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

Martin SK 24MM Quick Disconnect Bushing, Ductile Iron, Metric, 24 mm Bore, 71.42 mm OD, 49.21 mm Length

  • Quick disconnect bushing for mounting a pulley, sheave, or sprocket on a drive shaft.
  • Split through flange and taper to provide strong clamping on the shaft.
  • Ductile iron for greater strength than gray cast iron and resistance to wear, galling, and corrosion.
  • Keyed to the shaft to prevent the shaft from rotating in the bushing.
  • Set screw over keyway to help keep key in place on vertical shafts and with vibrating loads.
Check Stock

SUNGATOR Angle Stop Add-A-Tee Valve, 3/8

  • Lead Free Brass: Heath and environment friendly material. Lead free brass for both potable and non-potable water. 3/8" compression inlet x 3/8" compression outlet x 3/8" compression outlet..
  • Wildely Used: Angle stop add-a-tee for adding an outlet on a angle stop valve for a refrigerator, ice maker, water filtration system, dishwasher, second faucet, etc..
  • Durable: Brass for corrosion resistance, high temperature ductility and low magnetic permeability, have a longer using life than iron and iron galvanized products..
  • Better Sealing: Built-in rubber ring for better sealing, a sealing tape included for further improving sealing performance by using on the male thread end..
  • Package Includes: 3/8 Inch Lead Free Add-A-Tee Valve (2 pcs).
Check Stock

Wrights BDX230-008.45 Bondex Iron-On Patches 5\X7\ 2/Pkg-Light Grey

  • Bondex iron on patches are washable and dry cleanable.
  • Just follow the simple instructions, and your garment will be as good as new.
  • Read complete instructions and cautions before use.
Check Stock

Taytools 469591 Fore Bench Hand Plane #6, 18 Inch Sole, Ductile Cast Body, Lapped Sides and Bottom, Blade RHC 55-60, Sapele Handle and Tote

  • Body and frog made from nearly indestructible ductile cast iron.
  • Tote and knob are made from premium grade oiled and hand-rubbed Sapele.
  • Iron is 0.120” thick and 2-3/8” wide and made from tool steel hardened and tempered to 55-60.
  • Sole precision ground to within the British Standard of 0.005” over the entire length.
  • Overall length 18" and 2-7/8" wide, overall weight 7.86 pounds.
Check Stock

Yost Vises ADI-6 6 Inch 130,000 PSI Austempered Ductile Iron Bench Vise with 360-Degree Swivel Base superseding Yost FSV-6

  • Casting Clamp force: 17, 000 lbs. and Torque rating: 400 Ft-Lb.
  • Made from high-strength 130, 000 PSI Au tempered Ductile Iron castings, 4x stronger than cast iron vises and 50% stronger than Forged Steel Vise (FSV)....
  • Jaw Width: 6" x Jaw Opening: 7. 8" x Throat Depth: 3. 7" x Pipe Capacity: 0. 75"D x 3. 5"D.
  • 360-degree interlocking (geared) swivel base with (2) lock downs adjusts the direction of the jaws for proper placement.
Check Stock

Weiler 21111 0.0104\ Wire Size, 3/4\ Diameter, 5-1/2\ Length, Steel Bristles, Double Stem Double Spiral Power Tube Brush, Made in the USA

  • Ideal for aggressive cleaning and deburring on on steel, armored steel, cast iron, ductile iron and tool steel parts.
  • Features four stem wires and a double spiral of straight wire fill material.
  • 1/4" stem diameter for use on CNC/milling/automatic machine, drill, drill press, corded/cordless hand drill or cordless screwdriver.
  • Specifications: 3/4" Power Tube Brush, .0104" Steel Wire Fill, 2-1/2" Brush Length.
  • Country of Origin: United States of America.
Check Stock

Franzis Porsche 911 Boxer Engine Model Kit - Porsche Museum Edition

  • BUILT TO LAST: Cast from ductile iron, this Jake's Lift Kit is 3X stronger than gray iron which gives superior strength compared to welded spindle kits.
  • MADE TO FIT: Specifically designed for Club Car DS electric models (1981-2003.5) and gas models (1996.5-2003.5) with metal dust covers on the front hubs.
  • EASY INSTALLATION: No-cut, no-weld design makes for the fastest bolt-on install possible, with easy to follow instructions included.
  • A BETTER RIDE: Designed to lengthen the wheelbase and square up the cart for added stability and can accomodate up to 20" tires.
  • MADE IN THE USA: For over 30 years, Jake’s proudly offers quality, American-made lift kits and off-roading accessories for your cart. Go ahead and take the road less traveled–we’re got your back.
Check Stock