Best Groove Ball Bearing

DELTA-Milwaukee Double Duty 930, 950 & 46-230 11" Wood Lathe with Steel or Cast Iron Bed Operator & Parts Manual

  • Double-sealed, deep-groove ball bearing insert for applications with radial, thrust, and combined loads.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Set screw locking for secure attachment to shaft.
  • Contact seals and flingers on both sides of the bearing keep lubricant in and contaminants out.
  • Grease fitting on the housing for reapplying lubricant.
Check Stock

1 Pcs of 6\ Inch Lazy Susan Turntable Bearings Hardware Square Rotating Bearing Plate for Serving Trays, Swivel Plate, Kitchen Storage Racks, Craft Table

  • Durable material:The ball bearing rotating plate is made of high-quality durable metal,the surface is zinc-plated,which prevents oxidation and rust,is strong and corrosion-resistant,has strong load-bearing capacity.There are enough balls in the raceway groove to meet the needs of the flexibility of the turntable..
  • Wide applications:Our ball bearings can be used in many places,ideal for making DIY swivel racks,and can also be used in crafts,kitchen cabinets,flower pots,magazine racks,display racks.and have up to 500 pounds weight capacity, ideal Lazy Susan base for turntable project.
  • Ideal Size:15.5 x 15.5cm / 6.1 x 6.1"(L),square board, 0.85cm / 0.33"H..
  • Smooth Rotation: The turntable adopts double bearing design, which better wraps the balls, can achieve 360-degree rotation, more flexible and stable. Give the ball bearings a little oiling before installation to reduce noise and rotate quietly..
  • Easy to install: Even if you are not good at DIY, it is easy to install,the Lazy Susan turntable has 8 pre-punched holes, you need 8 screws for installation, hole diameter: 5mm..
Check Stock

[50-Pack] 1633-2RS - Deep Groove Radial Ball Bearing 0.625 in x 1.75 in x 0.5 in ID x OD x Width | 15.875 mm x 44.45 mm x 12.7 mm ID x OD x Width with Double Rubber Seal

  • ✔️ [Bearing Type] - Deep Groove Radial Ball Bearing.
  • ✔️ [Dimensions in Inches] - 5/8" (Inner Diameter) x 1-3/4" (Outer Diameter) x 1/2" (Width).
  • ✔️ [Dimensions in Millimeter] - 15.875 mm (Inner Diameter) x 44.45 mm (Outer Diameter) x 12.7 mm (Width).
  • ✔️ [Quantity in Package] - 50 Pieces of Ball Bearing.
Check Stock

RBC KA075CP0 Thin Section Ball Bearing, Unsealed, Radial C-Type, 7.5\ Bore x 8\ OD x 0.25\ Width

  • C-type radial ball bearing for use where space is limited.
  • Deep-groove geometry for high speeds and supporting radial loads.
  • 52100 steel races and bearing balls for durability and resistance to deformity under heavy loads.
  • Conforms to ABEC 1F precision standard for performance within a narrow range of variation.
  • Open bearing for lubrication in place and for use in applications with little exposure to dirt, grime, debris, and other contaminants.
Check Stock

[10-Pack] R24-ZZ - Deep Groove Radial Ball Bearing 1.5 in x 2.625 in x 0.5625 in ID x OD x Width | 38.1 mm x 66.675 mm x 14.288 mm ID x OD x Width with Double Metal Shield

  • ✔️ [Bearing Type] - R24 Deep Groove Radial Ball Bearing With Double Metal Shield.
  • ✔️ [Dimensions in Inches] - 1.5" (Inner Diameter) x 2.625" (Outer Diameter) x 0.5625" (Width).
  • ✔️ [Dimensions in Millimeter] - 38.1 mm (Inner Diameter) x 66.675 mm (Outer Diameter) x 14.288 mm (Width).
  • ✔️ [Application] - Automotive, Agricultural, Tractors, Construction, Machinery.
  • ✔️ [Quantity in Package] - 10 Pieces of Ball Bearing.
Check Stock

[4-Pack] R24-ZZ - Deep Groove Radial Ball Bearing 1.5 in x 2.625 in x 0.5625 in ID x OD x Width | 38.1 mm x 66.675 mm x 14.288 mm ID x OD x Width with Double Metal Shield

  • ✔️ [Bearing Type] - R24 Deep Groove Radial Ball Bearing With Double Metal Shield.
  • ✔️ [Dimensions in Inches] - 1.5" (Inner Diameter) x 2.625" (Outer Diameter) x 0.5625" (Width).
  • ✔️ [Dimensions in Millimeter] - 38.1 mm (Inner Diameter) x 66.675 mm (Outer Diameter) x 14.288 mm (Width).
  • ✔️ [Application] - Automotive, Agricultural, Tractors, Construction, Machinery.
  • ✔️ [Quantity in Package] - 4 Pieces of Ball Bearing.
Check Stock

[5-Pack] R24-ZZ - Deep Groove Radial Ball Bearing 1.5 in x 2.625 in x 0.5625 in ID x OD x Width | 38.1 mm x 66.675 mm x 14.288 mm ID x OD x Width with Double Metal Shield

  • ✔️ [Bearing Type] - R24 Deep Groove Radial Ball Bearing With Double Metal Shield.
  • ✔️ [Dimensions in Inches] - 1.5" (Inner Diameter) x 2.625" (Outer Diameter) x 0.5625" (Width).
  • ✔️ [Dimensions in Millimeter] - 38.1 mm (Inner Diameter) x 66.675 mm (Outer Diameter) x 14.288 mm (Width).
  • ✔️ [Application] - Automotive, Agricultural, Tractors, Construction, Machinery.
  • ✔️ [Quantity in Package] - 5 Pieces of Ball Bearing.
Check Stock

20 Pcs 608 2RS Ball Bearings – Bearing Steel and Double Rubber Sealed Miniature Deep Groove Ball Bearings (8mm x 22mm x 7mm)

  • - SHKI Ball Bearings : If these small ball bearings don’t live up to your expectations, please let us know. You take NO RISK when you purchase with us. But we’re betting you’ll fall in love with these 608 bearings , and a team of wild horses couldn’t get them out of your hands and make you send them back. You’ll probably order MORE!.
  • - Pack of 20 pcs 608-2RS steel ball bearings (8x22x7mm), double-rubber sealed deep groove..
  • - This 608 2RS shielded 8x22x7 miniature ball bearing is a single-row bearings for supporting radial loads. The bearings is made of bearing steel for durability and resistance to rust, corrosion and deformity under heavy loads, and is Shields on both sides keeping lubricant in and contaminants out..
  • It has a revolutions per minute (RPM) limit of 34,000 with grease lubrication..
  • - Rolling bearings use rolling elements to maintain the separation between moving parts to reduce rotational friction and support radial and axial loads..
Check Stock

uxcell 20pcs MR52ZZ 2mmx5mmx2.5mm Double Shielded Miniature Deep Groove Ball Bearing

  • MR52ZZ Miniature Single Row Deep Groove Ball Bearing..
  • Bearing made from Chrome Steel(Gcr15) for durability and resistance..
  • Two steel dust shields to prevent ingress of dirt and foreign matter, high temperature resistance..
  • Features: simple configuration,high speed,less coefficient of friction,less vibration and noise..
  • Mainly take the radial load as well as moderate axial load..
Check Stock

[10-Pack] R24-2RS - Deep Groove Radial Ball Bearing 1-1/2 in x 2-5/8 in x 9/16 in ID x OD x Width | 38.1 mm x 66.675 mm x 14.288 mm ID x OD x Width with Double Rubber Seal

  • ✔️ [Bearing Type] - R24 Deep Groove Radial Ball Bearing With Double Rubber Seal.
  • ✔️ [Dimensions in Inches] - 1.5" (Inner Diameter) x 2.625" (Outer Diameter) x 0.4375" (Width).
  • ✔️ [Dimensions in Millimeter] - 38.1 mm (Inner Diameter) x 66.675 mm (Outer Diameter) x 14.288 mm (Width).
  • ✔️ [Application] - Automotive, Agricultural, Tractors, Construction, Machinery.
  • ✔️ [Quantity in Package] - 10 Pieces of Ball Bearing.
Check Stock