17ft (5.5 meters) Oxygen Free Copper 2-Channel Helical twisted construction RCA interconnect cable. 17ft (5.5 meters) Premium Frosted Blue 4 Gauge power wire with ring terminal provides optimal power transfer.
3ft (.95 meters) Premium Frosted Black 4 Gauge ground wire with ring terminal. 17ft (5.5 meters) Blue 18 Gauge remote turn on lead wire.
25ft (8.0 meters) Premium Frosted Blue/Black 16 Gauge speaker wire. One Recoil ANL/Mini-ANL Fuse-holder with 120A ANL fuse offers ideal protection for high powered systems.
One Black rubber firewall grommet. Four 4 Gauge Nickel Plated Ring terminals with blue/black boots. Five 18 Gauge Spade terminals with blue/black boots. One Red 18 Gauge butt connector. Ten 6” Black zip ties.
Amplifier Kit Key Features of RWK4CU:: Rockville RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables. 4 Gauge....
Kit includes: 17 ft. Frosted Blue 4 gauge power wire with seamless crimp ring terminal. 3 ft. Frosted Gray 4 gauge ground wire. 17 ft. Blue 18 gauge....
Three blue 12 gauge nickel-plated spade lugs. One black 4 gauge ring terminal. Ten 6" black zip ties.
Features of RXD-M3: Rockville RXD-M3 4000 Watt Peak/1000w Dyno-Certified RMS Mono 1 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings:....
Autel® Powerscan PS100 Power Circuit Probe Tester, Automotive 12V 24V Electrical Car System Diagnostic Circuit Tester, AC DC Resistance Voltage, Short Finder, Continuity/Probe/Signal Test, 40ft Cord
【Durable and Safety】Autel PS100 Circuit Probe Kit has short-circuit protected as well as a safety measure to protect the device from overload.Autel PS100 instantly checks component continuity and identifies positive, negative and open circuits. When the positive terminal is connected, the red LED light is on, accompanied by a beep. When the negative terminal is connected, the green LED lights up, along with low pitched tone. If it is an open circuit, the LED light won‘t on.
Hifonics BG-1600.4 Brutus Gamma 4 Channel Super A/B Class 1600 Watt Car Audio Sound System Subwoofer Speaker Amp Amplifier with Gravity 4 Channels 4 Gauge Red Amplifier Installation Kit Bundle
POWERFUL SOUND: Deliver powerful sound to your speakers and subwoofers with this Super Class A/B, 1,600-watt, 4 channel car audio amplifier.
OPERATION: Control your sound with 4 channel operation with either stereo or mono bridged operation, variable electronic crossover, and electronic equalizer capabilities.
Monitor overload and speaker short protection with illuminated indicators on the amplifier end panel.
OUTPUT TECHNOLOGY: Ultra-Fi MOSET output device technology and classic Hifonics aluminum construction for powerful sound, efficient cooling, and minimal distortion.
CONNECTORS: Secure molded connection terminal with easy-to-access, angled ports for all power, ground, and speaker connections and high-temperature, impact-resistant, nickel-plated connectors.
Nickel-plated connectors deliver efficient high/low level audio, crisp sound, while providing a secure and erosion-resistant seal.
...indicating the on-going protection. Once it turns off, it means power source (circuit breaker) breaks off or GFI is malfunctioning. Contact customer service for a replacement..
Easy Installation with back or side wiring. Standard wall plates, screws and installation instructions included. Caution: Do not unscrew the terminal screws too far or with excessive force. Do not use power tools to loosen the terminal screws. 20A/125V/2500W, ETL certified, 3-year warranty..
Ronybuy 10x Markers Wire Plug - 2 Wire Pigtail for Sealed Side Marker Tail Trailer Clearance Lights, 6" Long 2 Prong, Marker Lights Wiring Plug Fit 2" 2.5" Side Markers
【Description】Pack of 10pcs of 2 prong male pigtails wire plugs, they can be used to replace the OE plug of tail/trailer/clearance/marker lights..
【Specification】The plug harness connector is 2-Pin and 90°design, 6" long to connect with your lights easily. White is ground and black is positive. A #10 ring terminal of white wire is for easy grounding..
【Application】Fits 2" and 2.5" side markers and clearance lights, or any clearance or side marker lights that require a 2 prong male plug, or a replacement for any other devices that require a PL-10 2-Pin plug. Fits most trucks & trailers, and more..
【Easy Installation】Simply connect the 2 pins to the terminal before grounding the ring terminal to the chassis and connecting to a power source. Please note the connector plugs should work with round rubber grommets..
【Warranty】2-Year Warranty, 45 days money back guarantee. The trailer light Harness wire is DOT Certified and Meets SAE requirements..
17ft (5.5 meters) Oxygen Free Copper 4-Channel Helical twisted construction RCA interconnect cable. 17ft (5.5 meters) Premium Frosted Blue 8 Gauge CCA power wire with ring terminal provides optimal power transfer.
3ft (.95 meters) Premium Frosted Black 8 Gauge CCA ground wire with ring terminal. 17ft (5.5 meters) Blue 18 Gauge remote turn on lead wire.
One Recoil Mini-ANL Fuse-holder with 80A ANL fuse offers ideal protection for high powered systems. One Black rubber firewall grommet.
Four 8 Gauge Nickel Plated Ring terminals with blue/black boots. Five 16-14 Gauge Gauge Spade terminals with blue/black boots. One Red 18 Gauge butt connector. Ten 6” Black zip ties.
...lly and give you a buzzer prompt, reminding you whether the tested component is faulty..
[ How to Use ]: Clip the red clip to the positive electrode of the car battery and the black clip to the negative electrode of the car battery, press button to “Positive”side with LED lighting RED, conact the tip to positive terminal of tested component to active the component. If LED turns to GREEN with buzzer, stop testing and check the component if defective or not, or rating current of component is higher than that of this tester..
[ Packing Include ]: 1 X Power Scan, 1 x Probe Tip, 1 x Battery Hookup Clips, 1 x User Manual, 2 x clips. The cable length of the circuit tester is about 4m(13ft) which allows you access and test any electrical system easily. Note: This circuit tester can not be used for 110/220V systems, it is only used for DC 6-24V systems. Do not use on AC voltage..
[ NOTE ]: Before performing the test, please make sure that your tester is properly connected. Connect the red clip to the positive terminal of the car battery. Then connect the black clip to the negative terminal of the car battery. During the continuity test, the auxiliary ground wire needs to be connected to one side of the wire under test. When testing components in/out of the v....
10 Pack – ELECTECK 20A GFCI Outlets, Weather Resistant (WR) Outdoor GFI with LED Indicator, Tamper Resistant (TR) Ground Fault Circuit Interrupter, Commercial and Residential Use, ETL Certified, White
...indicating the on-going protection. Once it turns off, it means power source (circuit breaker) breaks off or GFI is malfunctioning. Contact customer service for a replacement..
Easy Installation with back or side wiring. Standard wall plates, screws and installation instructions included. Caution: Do not unscrew the terminal screws too far or with excessive force. Do not use power tools to loosen the terminal screws. 20A/125V/2500W, ETL certified, 3-year warranty..
