Best Guide Track Bracket

KREG Adaptive Cutting System Saw an

  • Rip, crosscut, and make angled cuts up to 50" Long in plywood, MDF, and panels.
  • Simply align the guide Track with your marks to make accurate cuts.
  • Hold track in place without clamps thanks to anti-slip guide strips.
Check Stock

Homacer Sliding Barn Door Hardware Bypass Double Door Kit, 14FT Flat Track U-Shape Bracket Classic Design Roller, Stainless Steel Brushed Nickel Heavy Duty Interior Exterior Use

  • ⭐NOT ENOUGH SPACE? NOT A PROBLEM! Ever frustrated that the ordinary bypass hardware taking too much space with its bulky appearance? With the new innovation of the U shape bracket bypass, we design the bracket to be simplistic at the same time super efficient to use. It only requires 7 1/2 inches clearance and if you are short in the room between the top of the door to the ceiling, the U shape bracket bypass will be a perfect choice..
  • QUALITY IS 100% UNDER CONTROL. We picked the most premium carbon steel to make the hardware heavy-duty and sturdier than the competition. The black powdered coating makes the paint stays forever and will not be scratched off. The wheels of the roller are made of high-quality nylon which ensures minimal noise when it glides on the track. Each complete track can hold door weight up to 200 lbs..
  • FULLY OPTIMIZED CONNECTING AND SPACING. I understand how frustrated it was when you opened the box and found out multiple smaller tracks that were hard to line up and connect. Even worse when the spacing was not exactly 16 inches. We’ve got them all figured out! The spacing is now exactly 16 inches. Track 8FT and under is only one piece track.....
Check Stock

Rexka 15 pcs Fender Liner Bumper Cover Splash Shield Wheelhouse Liner Bolt Screw Compatible with GM 11570498 Chevrolet Camaro Colorado Corvette Cruze Equinox Silverado Malibu Traverse Cadillac Buick

  • Other Names:Wheelhouse Liner Bolt, Bumper Cover Bolt, Guide Bracket Bolt, Bumper Filler Bolt, Lower Cover Bolt, Flare Retainer, Flare Bolt, Splash Shield Bolt, Upper Cap Bolt, Lower Deflector Bolt, Lower Baffle Bolt, Bumper Cover Upper Bolt, Daytime Run Lamp Bolt, Upper Center Pillar Trim Bolt, Guide Bolt, Lower Grille Upper Bolt, Headlamp Assembly Bolt, Outer Bracket Screw, Reinforcement Bolt, Fog Lamp Assembly Bolt, Inner Grille Bolt, Side Retainer Bolt, Wheelhouse Liner Screw.
  • Other Names: Mount Bracket Bolt, Grille Assembly Upper Bolt, Corner Trim Bolt, Windshield Pillar Trim Bolt, Impact Bar Bolt, Bumper Cover Retainer, Side Impact Bag Bolt, Bumper Cover Lower Bolt, Side Cover Bolt, Center Duct Bolt, Lower Bracket Bolt, Tailpipe Extension Bolt, Absorber Bolt, Inlet Duct Bolt, Console Assembly Bolt, Upper Grille Bolt, Step Pad Bolt, Bracket Bolt, Grille Assembly Bolt, Vent Grille Bolt, Lower Absorber Bolt, Lower Support Bolt,Outer Brace Screw, Bumper Cover Screw,.
  • Replaces GM 11570498 ,Black Finish 4.2 - 1.41 x 20mm, 7mm Indented Hex Head, Loose Washer.
Check Stock

TURBRO Helmsman 6 ft. Heavy Duty Wood Sliding Barn Door Hardware Kit for Single Door - Stainless Steel Wall-Mounted Flat Track System, Wheel Hanger Kit - Slides Smooth & Quietly, Easy to Install

  • [Premium Hardware Material] This hardware kit is made of high-quality stainless steel, which is stronger, heavy duty and anti-rust, and provides a long-lasting working. Support weight up to 220 lbs..
  • [Unique Style] Stylish ship rudder design hanger with large roller adds a special, decorative touch while also moving smoothly and quietly when sliding..
  • [Flexible Flat Track] The sliding track rail is composed of multiple individual rails so you can adjust the track length to fit any size door frame up to 6 feet..
  • [Stability and Safety] Our kit comes with door stoppers and a floor guide to protect the door from sliding out of the track. The included floor guide prevents your door from swinging out of line or falling off the rails..
  • [Easy to Install] The rails and rollers are pre-drilled with holes for easy assembly. Door stoppers and floor guide are also included for a safer experience. Please note that the door is not included and must be purchased separately..
Check Stock

KREG ACS405 Adaptive Cutting System Rip Guides

  • Precision guides for making accurate, repeatable cuts up to 13" wide when using the Adaptive Cutting System Plunge Saw and 62" Guide Track.
  • Versatile for making clean, straight rip cuts up to 13" wide.
  • Precise measuring with built-in adjustable guides and hairline measurement indicators.
  • Attach quickly when needed, and easily removable without losing calibration.
  • Safe cutting is provided by positioning the 62" Guide Track precisely while the saw moves over the material.
Check Stock

Keenso Dash Car Compass, High Precision Auto Adjustable Boat Compass Dash Compass for Car Marine Boat Ship

  • ☆【 Professional Boat Compass 】This professional grade dash compass for car will always lead you in the right direction. Fit for car, watercraft, boat, caravan and truck and anywhere the beaten track takes you.
  • ☆【Corrosion Resistant】-- Our car dashboard compass is made of high quality ABS plastic material, which is durable, corrosion resistant and environmental friendly. Our pivoting compass will guide and accompany you on every pleasant journey.
  • ☆【Easy Direction Reading】-- Fast response and precise navigation. Easy to read precise dial. Adjustable mounting bracket and visible lubber line for easy direction reading.
  • ☆【Easy to Mount】-- 100% Brand New Aftermarket boat compass dash mount for car and boat, the mount has adhesive on the bottom, easy to stick the compass on car or boat.
  • ☆【Why Choose Keenso】-- High reliability and performance, durable and long lasting. Easy installation, perfect match for the original car. 100% test before shipping, fast money refund & new replacement! We provide 100% perfect customer service, please contact us if there is ANY problem!.
Check Stock

Makita P-20177 Guide Rail Connector Kit, 2/pk

  • Joins guide rails in two locations allowing for maximum connectivity.
  • Joins guide rails for making longer dead-on straight or bevel cuts.
  • Durable steel construction for long life.
  • For use with Makita 118" Guide rail (194367-7), 55" Guide rail (194368-5), 39" Guide rail (199140-0), as well as select competitor rails.
Check Stock

WINSOON New Sliding Barn Door Floor Guides Adjustable Stay Roller Hardware Kit,Smooth Ball Bearings,Flat Bottom Design,Flush with Floor, Wall Mount Roller Guide for Small Space,Black

  • [STURDY STEEL BRACKET, UPGRADED ROUND CORNERS]- Fine black powder coated barn door bottom roller guide is tough, durable and rustproof, flush with the floor/ground, no screws protrude from the bottom, no groove required for door, no drilling on the floor. Perfectly shaped with round corners, countersunk holes and recessed screw heads, this wall guide keep children and toes safe from the hurts..
  • [EASILY MOUNTED FOR MANY APPLICATION]- WINSOON heavy stay roller door guide can be fixed/installed to the wall with screws, low profile sliding gate rollers looks great both indoors /outdoors for area such as living rooms or DIY project such as carpet on concrete slab, works perfect for keeping the door/gate lined to the wall.
  • comes with step by step instructions, very easy to assemble..
  • [SMOOTH & QUIET, GLIDE LIKE BUTTER]- Our bottom adjustable roller wheels contain built-in ball bearings, provide a smooth and effortless rolling, and not like others that have big wheels, only two small bearings, keep the door balanced and stable from both sides, just need small space to install, offer more wiggle room for perfect alignment of rollers with the door..
  • [ADJUSTABLE ROLLER POSITION] – Fully adjustable for different thickness barn doors, suitable door thickness can ....
Check Stock

DIYHD 8FT Brushed Nickel Sliding Barn Door Hardware Two-Side Soft Closing Mechanism

  • The track had been pre-drilled 16" apart holes.
  • Track's two end had been pre-drilled small holes for track connector to make a long track.
  • Package's including:Wheel*2,Stopper*2,4FT Track*2,Track connector*1,Track&wall connector*6,Floor guide*1,Anti-pad*2.
Check Stock

U-Groove Wheel,Heavy Duty Rigid Caster,Sliding Door Roller,Steel Plate Support,for Round Tube,Round Steel,Wire Rope,2pcs (100mm/4in)

  • ? Features: Heavy-duty and solid guide bearings bring huge loads to your project, U-shaped design, smoother operation.
  • ? High quality: U-shaped track wheels made of high-strength steel plate have the characteristics of strong bearing capacity, good toughness, and no rust..
  • ? Sturdy and durable: sophisticated technology, sturdy design, durable and wear-resistant, and strong load-bearing capacity..
  • ? Material: It is made of durable steel bracket and nylon material, which is sturdy and durable, can reduce vibration and has a long service life, which will provide you with the most convenient work..
  • ? Scope of application: This product is suitable for installation on sliding doors or wire rope rolling, running on round pipes or round steel, hemp rope, easy installation..
Check Stock