Best Hammer Drive Pin Anchors

JXSZ SCSI 68Pin 68-Pin Male to 50Pin 50-Pin Male Adapter Converter m-m

  • This SCSI 68-Pin To IDC 50-Pin Adapter allows a SCA 80 pin hard drive interface to connect a 50 pin IDC Slim design, connect directly to drive..
  • Authentic only if sold by Micro SATA Cables..
  • Categories: Drive Adapters, Drive Converters, SCA 80 to SCSI 50/68 Adapters, SCA 80 to SCSI 50/68 Adapters.
Check Stock

100Drywall Self-Drilling Anchors with Screws Kit Heavy Duty Wall Anchor Tapping Screw with Screwdriver and Storage Box for TV Cabinet Fixed Curtain Hang Up to 66 lbs 12 x 30mm

  • [What You Will Get] You will get 100 drywall self d0rilling anchors screws, including 50 drywall anchors and 50 pieces of wall anchor tapping screw screw. The quantity is enough for your daily use. The package also includes 1 screwdriver and 1 transparent box for installation and storage..
  • [Quality Material] Our drywall anchor kit is made of quality carbon steel and plated with zinc.With a strong structure to achieve maximum durability, it also has strong corrosion resistance and oxidation resistance. When you tighten the screws, the ribbed anchor splits will expand on opposite sides to increase the holding power..
  • [No Need to Drill Hole in Advance] Drywall self-drilling anchors don’t need to drill and punch holes in the wall in advance, and they will have little damage to the wall. The heavy duty drywall anchors are specially designed for drywall, which can help you quickly install screws on it. Easy to disassemble for reuse without leaving large holes in the wall..
  • [Easy to Use] The installation of drywall self-drilling anchors is divided into 3 steps: 1. Hammer the anchor into the dry wall.
  • 2. Insert the screw into the anchor hole.
  • 3. Tighten the screw with a screwdriver, and then you finish it! Our carbon steel anchors make installation and disass....
Check Stock

(2-Pack) COMeap 3.5

  • 3.5" Floppy 4 Pin - SATAFloppy 4 pin female end to plug into 3.5" floppy drive port, SATA end to plug into hard drive.
  • ConnectorConnector A: 1x Floppy 4 pin female, Connector B: 1x SATA.
  • CompatibilityCompatible with 3.5" floppy drive disk.
  • ParameterLength(including connectors): 7.3-inch(18.5cm)(approx), Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 2pcsSelf-adhesive tape*1pcs.
  • NoteThis cable was only designed for 3.5" floppy drive disk.
Check Stock

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • ...emove Front Wheel Drive Axles Easily] To replace or repair your constant velocity (CV) axle joints, use the ABN Front Wheel Drive Axle Puller Attachment.
  • Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
  • [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • Fits slide hammers with 5/8-inch x 18 threads.
  • [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
  • Use the slide hammer to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while res....
Check Stock

Qualihome Self Drilling Drywall Anchors - Plastic Anchors for Drywall Gypsum Wallboard Sheetrock - Screw Anchors for Multiple Wall Hanging Items - No Pre Drilling Required - 75 Lbs 200 Pack

  • ✔️ Strong Hold Anchors: When it comes to hanging heavy paintings on your dry walls, you want to ensure the strongest hold. There is no more effective tool than wall anchors, and our plastic wall anchors by Qualihome is your best bet as they are compact, durable and goes straight into the wall without ruining the surface..
  • ✔️ Durable Plastic Material: Self-drilling anchors screws are made of high-quality plastic to ensure they retain their strength and durability over time. These drywall anchors have deep threaded nuts and pointed tips like screws, making them ideal for use with 3/8", 1/2", or 5/8" gypsum wallboard, drywall, or sheetrock..
  • ✔️ Self-Drilling Design: No pilot hole required! To hang anything on the drywall, drive the screw anchors right into the wall using the screwdriver, then insert the wall screws in the middle of the anchor, and that’s it. As you tighten the screw, the anchor’s threaded sides will cut deeper into the wall, ensuring a pull-out-resistant grip..
  • ✔️ Package Includes: A pack of 200 self-drilling sheet-rock wall anchors is sufficient to meet your home/office organizational needs. Offering durability and practicality, these heavy-duty drywall anchors require no tools for installation onto drywall or gypsum w....
Check Stock

Hotop Drywall Self-Drilling Anchors with Screws Kit, Carbon Steel Anchor Self Tapping Screw Assortment for Shelf Straps Cabinet Decoration Fixing, 12 x 30 mm, No Drill or Holes in Wall (60 Pieces)

  • Drywall anchors and screws kit: there are drywall anchors (approx. 12 x 30 mm/ 0.47 x 1.2 inch) and screws (approx. 4 x 30 mm/ 0.15 x 1.2 inch), total quantity for you to choose, which are enough to meet your needs.
  • Sturdy material: these drywall self-drilling anchors are made of carbon steel with good hardness, which can withstand huge pressure and are not easy to deform.
  • Zinc plated surface enhances their corrosion and oxidation resistance, ensuring long service life and easy storage.
  • Wide range of uses: these self-drilling anchors and screws are suitable for hanging various items on your home decoration, such as curtains, wall lamps, murals, partitions, pipelines, picture frames, clocks, plants and more.
  • How to use: the anchors can help you quickly install screws on drywall.
  • You can first hammer the anchor nail into the dry wall, then insert the screw into the anchor hole, and finally tighten the screw until it is fixed.
  • No hole or drilling required: there is no need to drill holes on the wall, and no drilling tools are required.
  • You can easily remove screw and item, leaving anchor in wall for reuse and no hole in the wall after use.
Check Stock

Heavy Duty Galvanized Rebar Stakes U Hook Trampoline Anchors, ZEONHAK 16 Pack 12 Inches, Trampoline Rebar Stakes, Trampoline Anchors Stakes for Camping Tents, Soccer Net, Fences, Swing, Decorations

  • PREMIUM MATERIAL - Are you still worried about the durability of the u shaped ground anchors? These u shaped ground anchors are made of high-quality heavy-duty steel with anti-rust coating on the surface to make it strong, corrosion-resistant, not easy to rust or bend, and has excellent durability and long-term service life..
  • SHARP END DESIGN - The chisel pointed ends makes it easy to penetrate the u shaped ground anchors into hard soil, sand, turf or rocky soil. You can use a hammer or other tools to insert the u shaped ground anchors into the ground deeply. The heavy duty trampoline rebar stakes have a convex ridge to prevent it from being pulled out in severe weather conditions such as strong winds or hurricanes..
  • VALUE FOR MONEY - You will get 16 pack trampolines wind stakes to meet the various needs of your daily life. The length of the trampolines wind stakes is 12 inches, the diameter is 3/8 inch, and the inside diameter is 2 inches. They will safely and permanently secure whatever you want..
  • WIDE RANGE OF USES - The trampoline anchors are very suitable for safely and firmly securing trampoline, tents, fences, swings, football nets, sports training equipment, tarps, landscape edges, huge holiday decorations and so on. Our product will bring you ....
Check Stock

AAGUT 16' Rebar Tent Stakes Heavy Duty J Hook Ground Anchors Galvanized Steel Metal Garden Stake Yard Landscape Spikes 8 Pack for Chain Link Fence, Canopy

  • J HOOK GROUND ANCHORS - These J hook stakes are ideal replacements as trampoline wind stakes, playset anchors, canopy stakes, tent stake, fence stakes, swing set anchors. If you have a trampoline, it is necessary to add these heavy duty rebar stakes to reinforce and keep it in place when the trampoline is used, especially in the place always meet hurricane or other strong winds. These ground anchors will keep your trampoline from flipping or moving during use..
  • HEAVY DUTY REBAR STAKES - 3/8 inch diameter and 16 inch long, 2inch inside diameter extra heavy duty Ground Anchors. Made of weather resistant galvanized heavy duty steel rebar that is reliable and long-lasting in outdoor use and strong enough to fight the high wind..
  • MULTIPLE USES - Use them as chain link fence stakes. Help you to hold down the swing sets, trampoline, soccer goals, camping tents,hammock slides, fences, yard decorations, huge Christmas Outdoor Decoration, nets, large canopy, inflatable outdoor yard decorations, irrigation, tarps, soccer nets, landscape edging, garden trellises, gazebos and more..
  • SHARP END - Chisel pointed ends help J hook stakes can sink deep into the dirt, grass, sand, hard clay and rocky soils by using a hammer. These 16 inch extra long rebar stakes wit....
Check Stock

Edward Tools Ball Peen Hammer 16 oz. - Forged Fine Grain Steel Head - Ergonomic Rubber Cusion Grip - Fiberglass Shock Absorbing Shaft - Pein Hammer - Metal Work, Rounding, Blacksmith Hamer, Mechanics

  • Heavy duty forged and polished fine grain steel head.
  • Versatile tool - Works as a blacksmith hammer, chasing hammer, masonry hammer, rounding hammer, pin hammer.
  • Lifetime Warranty - All Edward Tools come with a lifetime warranty.
Check Stock

Metabo HPT Rotary Hammer, 8.4-Amp Motor, 1-1/2-Inch Spline Shank, Adjustable 360 Degree Side Handle (DH38YE2)

  • Rotary Hammer with 1-1/2-Inch spline shank.
  • MOTOR: Powerful 8.4 Amp motor delivers 950 watts of input power for maximum productivity.
  • POWER: Produces 5.9 ft/lbs of impact energy for faster drilling and chiseling through concrete.
  • APPLICATION: Great for drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods.
  • LIGHTWEIGHT: Only 14.1 lbs for less fatigue.
  • MODES: Two modes of operation - hammer only and hammer drilling controlled by the simple turn of a knob.
  • LOW VIBRATION: Only 18.8m/s2 (full load) for more comfortable operation in hand.
  • LOW NOISE: Only 95.2 dB (full load) for a less noisy work environment.
  • SAFETY: Safety clutch shuts down rotation in the event of a bound bit for improved user protection.
  • HANDLE: Adjustable 360 degree side handle provides better control and can be removed easily.
Check Stock