Best Hand Held Circular Saws

Turbo Flex 360 Instant Hands Free Faucet Swivel Spray Sink Hose - As Seen on TV

Set of 3 OFFICIAL AUTHENTIC ROTORAZER PLATINUM blades (Tungsten, Steel and Diamond Cut) designed for the Rotorazer Platinum Saw, a multi-use all....
7 DIFFERENT SAWS IN ONE. Rotorazer is a combination of a Jigsaw, Circular, Hand, Band, Tile, Hacksaw, & Miter Saw..
1 Diamond Cutting blade best for cutting tile and stone, 1 Tungsten carbide blade with 18 teeth best for cutting wood and laminate, & 1 High-Speed....
Circular Saw Kit comes with multiple multi saw blades (Tungsten Carbide, Diamond, Steel), Dust Collector, Saw Case. 85MM blades (vs 54.8MM original....
EASILY CUTS IN ANY DIRECTION - horizontally, vertically, straight lines, curved lines, corners, & even upside down..

Check Stock

Iron Cutting Saw Blade,Saw Blade Metal Circular Iron Cutting High Speed Steel Hardware Tools 355x2.6x2.0x25.4x66T

Fast cutting with long durability, negative rake angle design is suitable for hard materials.
Possess high hardness large cutter head, fine grinding surface, stable body.
Saw blade have stable structure, excellent performance and long service life.
Good-quality high-speed steel material, possess good strength, toughness, and strong wear resistance.
This equipment is used for circular saws, mitre saws, table saws, radial arm saws, etc..

Check Stock

CMT P10050 ITK Plus Combination Saw Blade, 10 x 50 Teeth, 1FTG+ 4ATB Teeth with Shear with 5/8-Inch bore

for rip/crosscuts on wood. The large gullets allow deep cuts and effective chip clearance..
Use on radial arm saws, miter saws, circular saws, table saws for cutting soft/hardwood & plywood..
0.094 kerf thickness, 0.063 plate thickness, 15° cutting angle, 1 Flat and 4 Alternate Teeth grind..
Thin kerf reduces material waste, shear angle produces smooth cuts and improves cutting speed..
Special Carbide prevents from material failure, Non-Stick Orange Shield protects against corrosion..

Check Stock

WEN BL0736 7-Inch 36-Tooth Carbide-Tipped Professional Saw Blade for Steel Cutting

Featuring a 7-inch diameter (178 mm), a 20 mm arbor, and a rating of up to 3500 RPM.
Perfect for slicing through steel and metal.
Ultra-thin 1/10-inch kerf (2.0 mm) provides clean and efficient cuts.
Designed with 36 carbide-tipped teeth for general-purpose steel cutting.
Compatible with 7-1/4-inch circular saws, track saws, and miter saws.

Check Stock

Lackmond Beast Pro 7 Wet/Dry Porcelain Turbo Mesh Saw Blade - 7 Tile Cutting Tool with Quick Cooling Mesh Rim & 7/8 - 20mm - 5/8 Arbor - BPM7

TURBO MESH CONFIGURATION – The unique turbo mesh rim significantly aids in cooling the blade, resulting in longer blade life and extremely clean/....
ASSORTED TILE APPLICATIONS – Designed to be used on porcelain tile, ceramic tile, marble, granite and other natural stone.
BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious....
EQUIPMENT – For use on Tile saws, circular saws, and hand grinders.
WET OR DRY SAW BLADE – 4"-7” BLADES can be used wet or dry. 10” blade is for wet only.

Check Stock

Delta Diamond Cougar HS 14 Inch Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .125 X 1\-20mm Arbor (14\)

WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
SPECIFICATIONS - 14" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..

Check Stock

Delta Diamond Cougar HS 12 Inch Segmented Diamond Saw Blade Premium General Purpose Cutting of Concrete Masonry Pavers Stone .125 X 1 -20mm Arbor 12

WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
SPECIFICATIONS - 12" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 6,300 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamond segment and the steel core becomes separated at any time, the diamond tool will be replaced free of charge..

Check Stock

Bardland JC-156 Diamond Blade 6” (156mm) - Fast and Smooth Wet and Dry Cutting Circular Saw for GP Construction/Concrete/Roof Tiles/Stone(JC-156 6\/ 1 Packing)

SPECIFICATIONS: Made of premium Metal Components and High Quality Diamond Grits - Diameter - 6" (156mm) / Thickness 0.086"(2.2mm) – For Wet & Dry Cutting - ⅞” Arbor suitable for Angle Grinders, Circular Saws, Masonry Saws and Gas Cut-Off Saws..
FAST SMOOTH CUTTING – With Max 9000 RPM, these premium general purpose blades are produced specifically for use with construction materials such as concrete, roof tiles, stone and more..
FOR THE PERFECT JOB EVERY TIME - High quality and high performance these circular saw blades perform better and longer than other diamond saw blades. Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or for work in your home studio, this is the perfect blade for you..
SPEEDY CUT WITH MINIMAL DUST due to the thin kerf we have used in developing this high-quality diamond masonry blade..
MAIN FEATURES: The product is 6" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal..

Check Stock

Bardland HNT-156 Diamond Blade 6” (156mm) - Fast and Smooth Wet and Dry Cutting Circular Saw for GP Construction/Concrete/Roof Tiles/Stone(HNT-156 6\/ 1 Packing)

SPECIFICATIONS: Made of premium Metal Components and High Quality Diamond Grits - Diameter - 6" (156mm) / Thickness 0.086"(2.2mm) – For Wet & Dry Cutting - ⅞” Arbor suitable for Angle Grinders, Circular Saws, Masonry Saws and Gas Cut-Off Saws..
FAST SMOOTH CUTTING – With Max 9000 RPM, these premium general purpose blades are produced specifically for use with construction materials such as concrete, roof tiles, stone and more..
FOR THE PERFECT JOB EVERY TIME - High quality and high performance these circular saw blades perform better and longer than other diamond saw blades. Whether you are a construction worker, plumber, tile installer, roof worker, DIY enthusiast or for work in your home studio, this is the perfect blade for you..
SPEEDY CUT WITH MINIMAL DUST due to the thin kerf we have used in developing this high-quality diamond masonry blade..
MAIN FEATURES: The product is 6" High Performance Blade, High Performance diamond matrix provides 200x's the life of conventional abrasives and enhanced material removal..

Check Stock

Lackmond Beast Pro 4.5 Wet/Dry Porcelain Turbo Mesh Saw Blade - 4-1/2 Tile Cutting Tool with Quick Cooling Mesh Rim & 7/8 - 20mm - 5/8 Arbor - BPM4.5

TURBO MESH CONFIGURATION – The unique turbo mesh rim significantly aids in cooling the blade, resulting in longer blade life and extremely clean/....
ASSORTED TILE APPLICATIONS – Designed to be used on porcelain tile, ceramic tile, marble, granite and other natural stone.
BUILT FOR THE PROFESSIONAL – This is the ideal diamond saw blade for tile workers, construction workers, carpenters, general contractors, serious....
EQUIPMENT – For use on Tile saws, circular saws, and hand grinders.
WET OR DRY SAW BLADE – 4"-7” BLADES can be used wet or dry. 10” blade is for wet only.

Check Stock