Hantek AC/DC Current Clamp for oscilloscope 20KHz Bandwidth 1mV/10mA 65A with BNC Plug (CC-65)
Any Win10 driver issue, please kindly contact us via Amazon, we will support you to download and install it.
Hantek 6022BE is with High performance, 48MSa/s real-time sampling, 20MHz bandwidth.Great industrial design, the high quality anodized aluminum case is extremely durable and heat-resistant..
2channels 20MHz USB oscilloscope with USB2.0 PORT - there is no need extra power supply for the portable oscilloscope, it can be connected to pc through the USB port for power directly, similar interface with desktop oscilloscope, easy to use.
POWFUL FUNCTION WITH SMALL SIZE - the usb oscilloscope owns ore than 20 kinds of automatic measurement functions, PASS/FAIL Check function, suitable for technical application,supports Windows 10, Windows 8, Windows 7, Windows NT, Windows XP, VISTA..
【Professional Storage Oscilloscope】- Super-economical digital storage oscilloscope.Cost-effectiveness,100MHz bandwidth,4 channels input,max input voltage 400 Vpp,1GS/s sample rate,8-bit high resolution,SCPI and LabVIEW (USBTMC) supported.Communicate with computer through the supplied USB cable.Front USB port,support U disk storage..
【7" LCD Screen & Simple Operation】- This oscilloscope with 7" large color LCD screen, 800 x 480 pixels display, clear and realistic waveform display。Easy-accessible operation menu gets you to the result conveniently。ultra-thin body and handle design, lightweight and portable, cooling holes on the back can ensure fast cooling during prolonged use..
"Multi-Function :Waveform storage function,16 sets of waveforms can be saved in the internal memory or U disk. The saved waveform and the measured waveform can be compared and analyzed. One-Click show all measurements,built-in 39 types of auto measurement,convenient to view the waveform information. FFT spectrum analysis function, supports for Hamming, Blackman, Rectangular, Kaiser, Bartlett.".
【Widely Used Oscilloscope】- With multiple trigger functions and more than 30 kinds of automatic measurement functions,Vmax, Vmin, Vpp, Vtop, Vbase, Vamp, Vavg, Vrms, Cycle RM....
DSO 138 DIY Oscilloscope Kit Opening Source 2.4″ TFT 1MSPS Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Sized 13803K, SMD Soldered Electronic Learning Set
Digital DIY oscilloscope uses ARM Cortex-M3 processor and contains a 2.4-inch color TFT display, which can be used as an ARM development test board..
Let you effectively observe and measure signal waveforms in many occasions such as audio, video synchronization, low-frequency switching power supply, infrared receiving and transmitting..
Can make a tailor-made software development on the basis of this kit, which can be can be changed to millivoltmeter, data recorder, etc..
The variety of components is suitable for students to understand the oscilloscope structure and principles, and do in-line component welding, and chip component welding training..
The oscilloscope kit is a kit specially designed for professional teaching and training in electronics. Please note that this kit need to be assembled and soldered by yourself..
Loto USB Oscilloscope OSC482M for Both Android Phone/Tablet & Windows PC, 2 Channels, 50M S/s, 20MHz (Bandwidth), 8~13 bit Vertical Resolution
Any Win10 driver issue, please kindly contact us via Amazon, we will support you to download and install it.
Hantek 6022BE is with High performance, 48MSa/s real-time sampling, 20MHz bandwidth.Great industrial design, the high quality anodized aluminum case is extremely durable and heat-resistant..
2channels 20MHz USB oscilloscope with USB2.0 PORT – there is no need extra power supply for the portable oscilloscope, it can be connected to pc through the USB port for power directly, similar interface with desktop oscilloscope, easy to use.
POWFUL FUNCTION WITH SMALL SIZE – the usb oscilloscope owns ore than 20 kinds of automatic measurement functions, PASS/FAIL Check function, suitable for technical application,supports Windows 10, Windows 8, Windows 7, Windows NT, Windows XP, VISTA..
2 in 1 OSOTC2 Handheld Oscilloscope Multimeter with Electronic Component Tester,2.4\ TFT Digital,Multiple Waveform Capture with Power Supply
FNIRSI-TC2 ingeniously integrates digital oscilloscope, electronic component tester, PWM signal generator and other functions into one.Equipped with 2.4-inch oversized color dot matrix TFT，especially suitable for fast pairing of transistors, identification of mixed，surface mount and wordless components, and preliminary screening of small batch components..
The oscilloscope has a real-time sampling rate of 2.5ms/s, a broadband of 200kHz, a 2.4-inch TFT high-definition color screen, a complete trigger function (single time, normal, automatic) and can measure the voltage signal up to ± 400V. It is equipped with an 80kHz / 5.0V PWM wave test signal source with adjustable duty cycle, and is equipped with a funny one button auto. The measured waveform can be displayed by simple adjustment.
The oscilloscope has small volume, integrated support, free contraction, can rotate 90 degrees, does not occupy space and is convenient to carry. At the same time, it has built-in 1500mah rechargeable lithium battery and polymer lithium battery cell, which can continuously supply power for 240 minutes, which is safer and more lasting.
The crystal detector can automatically detect the pin definition and automatically analyze the infrared code of NEC protocol, automatica....
Signal Attenuation 20:1 1-0 MHz Bandwidth Converter Passive Attenuator for Oscilloscope
【Exclusive Design】-This signal attenuation is designed for assisting automobile measurement.
【Parameters】-Passive attenuator with 20:1 attenuation, if input a 20V signal, it can output a 1V signal.
【Measuring Range】-Because the signal is attenuated, by using this item, oscilloscope can measure voltage higher than its range(±20V).
【Usage Scenarios】-The signal converter can allow oscilloscope to measure fuel injector and primary ignition waveforms.
【Product Feature】-When used in an oscilloscope to measure an inductive signal, such as a jet nozzle and a primary ignition, it provides enhanced input overload protection.
FNIRSI DSO-TC2 2-in-1 Transistor Tester & Digital Oscilloscope, Mini Multimeter Tester - Voltage Detector, Power Probe Kit, Volt Meter, DIY Circuit Voltmeter, 2-Channel Resistor Relay
【2-IN-1 OSCILLOSCOPE & TRANSISTOR TESTER】: Get 2 essential tools in 1 compact device!.
【PORTABLE & CONVENIENT】: Comes with a built-in folding stand and a rechargeable lithium battery for on-the-go use..
⚡【HD COLOR DISPLAY】: 2.4 inch HD color screen for clear and easy-to-read results..
✅【AUTO TESTING】: Automatic testing capabilities for hassle-free use..
USB Oscilloscope, PC Based Dual Channel 25MHz Digital Oscilloscope, Handheld Mini Digital Storage Oscilloscope, Multi Functional, MIT USB Isolation, with Probe
▶▶PC virtual oscilloscope◀◀ dual-channel virtual oscilloscope, the detected waveform can be displayed on the computer, image storage, display on the same screen and other multi-function computer virtual oscilloscope..
▶▶Advanced◀◀ dual-channel input, 25Mhz bandwidth, 100MS/s sampling rate, 5K storage depth, fast acquisition speed, and general test requirements can be met..
▶▶Weak attenuation◀◀ The 25Mhz sine wave amplitude measured by the VDS1022I oscilloscope is 904mV, according to the international standard (-3dB attenuation, 707mV), which is better than the international standard and presents a perfect waveform..
▶▶Function◀◀ single channel/alternate channel trigger.
X-Y/FFT waveform display on the same screen.
18 groups of values can be measured simultaneously.
multi-function to meet your measurement needs..
▶▶Data recording◀◀ The waveform can be recorded/saved, and the maximum storage is 4000M, which can be read at any time. The waveform is perfect. It is a good helper for papers..
