Best Hardened Steel Plug

iCrimp Wire Rope Swager for Crimping Fishing Lines Up To 2.2mm

  • Hardened Steel / Black Oxidation Jaws: iCrimp Fishing Crimping Tool used high-quality carbon steel to support the jaws hardness.After black oxidation treatment on the surface form a dense layer of oxide film so you do not have to worry about it will be preserved by sea water corrosion or occasional inappropriate and rust.
  • 4 Crimping Positions and 2 Hardened Side Cutters:The 4 crimping positions include:0.5-0.1mm, 0.1-0.5mm, 1.0-2.0mm, 2.2mm.It can easy crimp copper / aluminum sleeve and more from 50-450 lb test line.
  • 2 Hardened Side Cutters and Loaded Spring Handle: The 2 hardened steel side cutters work with the spring which loaded handle.It help you cut the wire / monofilament without frays and the strong spring open the cutters instead by your hands.
  • Cushioned non-slip grips and Feature a Safety lock: The stainless grips wrapped with the non-slip cushioned and comes with a safety lanyard.The safety lock is easy way to keep you crimper close.
  • Better Quality:Hassle-free money back for non-artificial damage. Fishing promises 100% satisfaction to our every customers.
Check Stock

Brute Force U-Joint

  • Forged high quality alloy steel cross is case hardened to provide good wear resistance and maximum service life. Pre-installed grease fitting in the cross saves time, prevents installation damage and allows for easy U-Joint maintenance..
  • Forged high strength steel cups are case hardened for strength and durability. Cup face and outer diameter are precision ground to provide precise fit, lock up and balance ability..
  • High carbon steel needle bearings are through hardened and precision ground using a optimized crowning profile for maximum life and load carrying capacity..
  • Seals are made out of high quality nitrile rubber for optimal grease retention and contaminant exclusion. Multi-lip seal is pliable, yet tough and tear resistant..
  • All U-Joints are pre-lubricated with a premium, high temperature grease that performs well in a wide temperature range and provides a long service life..
Check Stock

Brute Force U-Joint

  • Forged high quality alloy steel cross is case hardened to provide good wear resistance and maximum service life. Pre-installed grease fitting in the cross saves time, prevents installation damage and allows for easy U-Joint maintenance..
  • Forged high strength steel cups are case hardened for strength and durability. Cup face and outer diameter are precision ground to provide precise fit, lock up and balance ability..
  • High carbon steel needle bearings are through hardened and precision ground using a optimized crowning profile for maximum life and load carrying capacity..
  • Seals are made out of high quality nitrile rubber for optimal grease retention and contaminant exclusion. Multi-lip seal is pliable, yet tough and tear resistant..
  • All U-Joints are pre-lubricated with a premium, high temperature grease that performs well in a wide temperature range and provides a long service life..
Check Stock

Estwing 1-3/4-Inch Wide Masonry Chisel with Protective Hand Grip Guard (42521)

  • MULTI-USE - Designed to score and shape hardened materials like stone, concrete and brick.
  • 1-3/4-INCH TIP - 1-3/4-inch wide cutting edge for precision use without damaging surrounding material.
  • CARBON STEEL - Drop forged from EN9 high carbon steel for lasting strength and durability.
  • GRIP GUARD - Large grip guard provides a comfortable handle on chisel and protection against missed strikes.
  • HARDENED EDGE - Hardened edge for cleaner, faster scoring with fewer blows and less deformation.
Check Stock

12 Pcs Precision Angle Block Set Machinist Tool Angle Gauge Block 1/4°- 30°Lathes Milling Ground Gauge Angle Calibration Gage Inspection Block Set

  • Product - Workshop-grade set features 12 individual steel blocks of various angles..
  • Includes - 1/4, 1/2, 1, 2, 3, 4, 5, 10, 15, 20, 25, and 30-degree hardened-steel blocks..
  • +/- 20 Seconds, 0.0001" per inch high precision..
  • Carrying case - Hard-shelled carrying case keeps the blocks organized and protected from contaminants..
  • Application - For angle set-ups in tooling, productions and inspection.
Check Stock

Jim Dunlop String Cutter System 65 Guitar Tools DGT07

  • Easy to cut up to 4/0 aluminum, 2/0 soft copper, 100-pair 24 AWG communications cable with our expertly induction-hardened high-carbon steel cutting....
  • Made of durable Chrome-Moly steel, these cable cutters feature precision-machined knife and anvil style cutting blades with a low profile design that....
  • The long handle of the wire crimper is 10 inch and wrapped with soft rubber, ergonomic lever structure design can increase friction and help you use....
  • You will get one piece cutter,Through-hardened (not case-hardened) for longer-lasting cutting surfaces..
Check Stock

waltyotur 12 Pcs Precision Angle Block Set Machinist Tool Angle Gauge Block 1/4°- 30°Lathes Milling Ground Gauge Angle Calibration Gage Inspection Block Set

  • Product - Workshop-grade set features 12 individual steel blocks of various angles..
  • Carrying case - Hard-shelled carrying case keeps the blocks organized and protected from contaminants..
  • Includes - 1/4, 1/2, 1, 2, 3, 4, 5, 10, 15, 20, 25, and 30-degree hardened-steel blocks..
  • +/- 20 Seconds, 0.0001 per inch high precision..
  • Application - For angle set-ups in tooling, productions and inspection.
Check Stock

1Pcs 8mm/10mm Tenon Maker Tenon Dowel & Plug Cutter Tapered Snug Plug Cutters For Furniture Making Carpentry And Home Projects

  • Made of hardened high-carbon steel.003cbr/003e003cbr/003e.
  • Open body design allows easy plug clearance..
  • 1/2" shank for drill in press, lathes, horizontal borers.
  • The shear angle design makes them the easiest cutting tools in the market..
  • Versatile tools to make tenons on round or square stock.
Check Stock

Amazon Brand - Denali 14-Piece Drill and Tap Combo Set

  • ideal for quick, easy thread cutting and hole making.
  • Includes a 14 piece set with 1/8-27NPT Pipe, 6-32 Taper, 8-32 Taper, 10-24 Taper, 10-32 Taper, 12-24 Taper, 1/4 - 20NC, Taper 1/4 - 28NF Taper, 5/16 - 18NC Taper, 5/16 24 NF Taper, 3/8 - 16 NC Plug, 3/8 - 24 NF Plug, 7/16 -14NC Plug and 1/2 -13NC Plug, 1-case.
  • Hardened, precision ground and polished surfaces with a rust resistant satin finish ensure long lasting strength.
  • Product dimensions: 5.12x2.95x0.83 inches(LxWxH, Carry Case).
  • This product is covered by the Accessories 1-Year Limited Warranty.
Check Stock

Stanley Hardware S825-547 V8208 Magnetic Doorstop Chrome 6-Pack

  • Molybdenum Cut Resistant Steel Shackle Protects Against Sawing And Cutting Attacks.
  • Hardened Steel Body Protects Lock From Attacks.
Check Stock