3/8 Inch Heavy Duty Forged Steel Clevis Slip Hook (Set of 4), Safety Hook G70 Tow Chain Clevis Grab Hook with Latch Forged Grade for Trailer Truck Transport Tow Chain Hook
HEAVY-DUTY CLEVIS SLIP HOOK - 3/8 inch Grade 70 Clevis Hooks make your job easier and give you peace of mind when you know your cargo, load is secured by Grade 70 clevis hooks with the higher working load limit than lower grade hooks..
SOLID MATERIAL- Forged with high-strength, low-alloy carbon steel and precision heat treatment, and coated with yellow zinc chromate finish for quick identification..
QUICK RELEASE - This clevis slip hook is equipped with a spring-loaded latch for secure attachment and quick release as needed. The base is also easy to attach to a safety chain or strap, featuring a strong hook pin and cotter pin..
EASY TO USE - The shallow throat opening allows for easy and secure connections with 3/8 inch Grade 70 chain. The cotter pin can be easily removed when needed..
APPLICATION - These grade 70 3/8 inch Clevis Hooks are so heavy-duty make them easy to use on utility trailers, flatbed trailers, truck, etc.It meets requirements for high-test, transport and alloy chain..
Kuryakyn 9063 Motorcycle Foot Controls: Standard Forward Control Kit for 1991-2017 Harley-Davidson Dyna Motorcycles, Chrome
...XDF, '09-'10 FXDFSE, '10-'16 FXDWG or '14-'16 FXDL. As a guideline, we suggest the Standard Controls, P/N 9063, for riders with a 33" or shorter inseam.
Parts Included: (1) Shift Assembly, Standard Forward Control, (1) Brake Assembly, Standard Forward Control, (1) Assembly, Brake Rod and Jam Nuts, (1) Shift Peg. (1) Hardware Kit Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.
4 Pack G70 Forged Steel Clevis Slip Hook 3/8 Inch Safety Hook with Safety Latch, Suitable for 10MM Chain Heavy Duty Grab Hook for Tow Winch Trailer, 18000 Lb Capacity
Reliable strength：With high-strength, forged steel construction and precision heat treatment, this 3/8 inch clevis slip hook is rated for heavy-duty loads up to 18,000 pounds gross trailer weight.
Provide security：This forged steel clevis slip hook has a grade-70 rating, offering superior tensile strength, resistance to abrasion. This chain clevis hook is great for connecting heavy-duty safety chains or securing transport binder chains.
Corrosion-resistant：To promote long-lasting use and dependable strength , this clevis grab hook is finished with a durable zinc plating. It resists rain, dirt, snow, mud and other corrosive elements.
Quick release：This 3/8 inch safety chain hook is equipped with a spring-loaded latch for secure attachment and quick release as needed. The base is also easy to attach to a safety chain or strap, featuring a strong hook pin and cotter pin.
Application: These grade 70 3/8 inch Clevis Hooks are so heavy-duty make them easy to use on utility trailers, flatbed trailers, truck, etc. It's great for connecting heavy-duty safety chains or securing transport binder chains. It meets requirements for high-test, transport and alloy chain.
8" of Adjustment - 4" of drop & 4" of rise (2 & 2-1/2" Hitch) - 10" of Adjustment for 3" Hitch for 5-1/2" Drop & 5-1/2" Rise. It also features two hitch pin holes for length adjustment, as well as making it compatible with hitch mount towing mud flaps & rock guards..
HD adjustable drop combo ball mount with dual hitch balls 2" & 2-5/16". Multi-ball 1-piece construction for max strength & durability. Premium clear zinc finish.
12,000 lbs towing capacity and a 1,200 lbs tongue weight..
Premium black powder coated finish of base frame / clear zinc plated combo ball mount. Works with all our other ball mount adaptors attachments.
Pintle hooks, sway tab, clevis, cushioned drawbar, drawbar, drop ball mounts, raise ball mounts and more.
Comes compete with Shocker XR base frame, adjustable combo ball mount with 2" & 2-5/16" hitch balls & 2 d-handle ball mount pins with clips. Made by Shocker Hitch USA..
More Than Just Parts: From snow and ice equipment to toolboxes, hydraulics, towing, truck and trailer hardware to our innovative lighting....
We Do Things The Right Way: We design products like we're building them for ourselves, because we are.
Our teams are staffed with engineers and....
Durable and Dependable: Founded in 1946, Buyers Products has become a leader in the truck equipment industry though our commitment to customer care,....
HIGHLY VERSATILE. This clevis pin trailer hitch ball mount equips your vehicle with two towing options: a strong clevis pin for straight-line towing applications, or the clevis pin can be removed and a trailer ball bolted on for towing a trailer.
DEPENDABLE STRENGTH. This ball hitch is constructed from high-strength steel and rated to tow up to 6,000 pounds gross trailer weight and 600 pounds tongue weight (limited to lowest-rated towing component).
READY TO TOW. Hitching up your trailer is easy with this 2-inch ball mount. It has a 2-inch x 2-inch shank to fit virtually any industry-standard 2-inch receiver.
CORROSION-RESISTANT. For long-lasting use, this ball hitch is protected with a durable black powder coat finish, easily resisting damage from rain, dirt, snow, road salt and other corrosive threats.
EASY TO INSTALL. To install this clevis pin hitch ball mount on your vehicle, simply insert the shank into your vehicle's 2-inch hitch receiver. The rounded shank makes installation easy. Then, secure the shank with a hitch pin (sold separately).
Shocker XR Cushion Adjustable Drawbar Ball Mount 4\ Rise to 4\ Drop 12,000 lbs, Fits 2\ Hitch
12,000 lbs of Towing Capacity - HD adjustable cushioned draw ball mount w/ 1" hole for attachment for farm applications. (This is NOT for use with hitch ball).
8 adjustment holes that can be flipped around more drop or rise 4" rise to 4" of drop. It also features two hitch pin holes for length adjustment, as well as making it compatible with hitch mount towing mud flaps & rock guards..
Comes with 4 bump cushions for smoother pulling. Premium black powder coated finish of base frame.
Base frame hitch works with all our other Shocker ball mount adapters attachments.
Pintle hooks, combo multiball, clevis, drop ball mounts, raise ball mounts and more. (sold separately).
Includes black Shocker XR base frame, adjustable drawbar mount with built in bump cushions & 2 d-handle ball mount pins with clips. Made by Shocker Hitch USA.
DC Cargo Mall G70 Clevis Slip Hook with Safety Latch – 3/8 Inch Grade 70 Clevis Hooks – Heavy Duty for Trailer Truck Transport - 6,600 Lbs 4-Pack
Safely Secure Heavy Loads: Attach heavy duty clevis slip hook with latch to Grade 70 tie-down chains. A safety latch provides extra security when securing loads on trailers, flatbreads and trucks..
Quick Installation and Removal: A clevis cotter pin makes it easy to assemble and disassemble rigging. Clevis hooks fit tie-down chains measuring 3/8”..
Ideal for Pulling, Towing and Transport: Slip hook with safety latch features a wide throat that is designed to hold webbing, chain, master link and shackles securely. Use to shorten or choke your chain length when transporting heavy items..
Transport Heavy Loads With Ease: G70 heavy duty safety chain hooks can haul loads up to 6,600 lbs. 26,600 lb. assembly break strength. Zinc-chromate finish prevents corrosion..
Quality You Can Trust: Clevis slip hooks meet FMCSA and DOT requirements. Backed by a 1 year warranty by DC Cargo Mall, manufacturer of innovative cargo systems for trucks and trailers..
TARAZON CNC Billet Forward Controls Footpegs for Harley Davidson Dyna Street Bob FXDB 2006-2017/ Low Rider FXDL 2000-2017/ Super Glide FXDC 2000-2017
...XDF, '09-'10 FXDFSE, '10-'16 FXDWG or '14-'16 FXDL. As a guideline, we suggest the Standard Controls, P/N 9063, for riders with a 33" or shorter inseam.
Parts Included: (1) Shift Assembly, Extended Forward Control, (1) Brake Assembly, Standard Forward Control, (1) Assembly, Brake Rod and Jam Nuts, (1) Shift Peg. (1) Hardware Kit Containing: (1) Shift Arm Retainer for ‘06-up Dyna, (1) #8-32 x 3/16” Setscrew, (1) Anti-Seize Packet, (2) 5/16”-24 Nylock Nut, (2) Ball Joints, (4) 3/8-16 x 1” Flat Socket Cap Screws, (1) 5/16-18 x 1/2 Hex Head Cap Screw, (1) Cotter Pin, Steel, 1/16 x 1”, (1) 0.256 x 0.406 x 0.030 Flat Washer, (1) 1” Clevis Pin, (1) Anti-Rattle Clip, Rubber Coated, (1) Female Clevis, 3/8-24 Internal Thread. Suggested Tools (not included): Set of Hex Wrenches, Set of Combination Wrenches, Socket Set and Ratchet, Needle Nose Pliers, Small Flat Tip Screwdriver, Vice Grip or Large Pliers, Torque Wrench (FT/LBS) and Hex Bit Socket Set, Blue and Red Loctite.
Compatible with Harley: '91-'17 Dyna Models (except '12-'16 FLD Dyna Switchback) Harley Note: Not compatible with most engine guards or with stock exhaust on '08-'17 FXDF, '09-'10 FXDFSE, '10-'17 FXDWG or '14-'17 FXDL.
