3D Printer Filament PLA-Meta 1.75mm, SUNLU Upgraded 3D Filament for 3D Pen&3D Printer PLA Meta, High Fluidity, No Clogging, High-Speed Printing, Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, Black
【Good printing effect, 100% Bubble-Free】- New upgraded Universe series 3D printing filament PLA-Meta strictly guarantees neat lineup, no knotting, strictly guarantees ±0.02mm wire diameter difference, 100% zero bubbles. Ensure high efficiency printing, say goodbye to plugging..
【Good fluidity, Strong resistance】- SUNLU 3D filament PLA-Meta is 1.5 times more fluid than ordinary PLA, About 1 times stronger than ordinary PLA and PLA+ in terms of impact resistance. The smoothness of the material discharge is excellent, reducing plugging, and the printed models are resistant to dropping..
【Lower printing temperature, lower consumption】 - PLA meta filament melting point is 155℃-170℃, Recommended printing temperature is 180℃-200℃, lower than PLA 3D printing filament. Lower melting point and printing temperature, means more energy saving, reduce printer loss and extend the life of 3D printer. It can also greatly reduce clogging, drawing, and ensure stable feeding and stable printing..
【New hue, Good Glossiness】- SUNLU upgraded 3D filament has a new hue to give you a new visual effect. PLA-Meta filament has good adhesion and super strong interlayer bonding, and the surface of the consumable has good glossiness, soft color and warm color,....
✔HIGH COMPATIBILITY - Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler, 1.75mm pla filament consistent diameter, dimensional accuracy +/- 0.03mm.
✔PREMIUM QUALITY - The pla have good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder. Amolen filament, which have premium quality, print Much More Smoothly..
✔VACUUM & REUSABLE BAG - Vacuum packaging with desiccant to keep it dry and keep out dust.The bag has a sealing strip,the pla filament can be put back into the bag after use and sealed for storage.
✔HASSLE FREE - AMOLEN is focus of special and better quality PLA filament. We provide professional 3D printing technical guidance and perfect customer service. Defective filament can be reissued or refunded fully. Why not choose AMOLEN 3D Printer Filament？.
SainSmart Light Weight Filament 1.75mm, LW-PLA Low-Density Active Foaming 3D Printer Filament for RC Planes Drone Parts and Cosplay, White PLA Filament, 1KG
[Reduced Weight]: Designed with active foaming technology, the SainSmart LW PLA Filament density of 0.54g/cm³ compared to 1.2 g/cm³ for regular PLA, means a huge weight reduction to your printed parts, perfect for stuff like RC planes and drones. The reduced weight enables lower wing loads and stall speed, allowing for overall better performance..
[2X 3D Prints with One Spool]: The foaming expansion of this LW PLA filament makes it possible for you to print at up to 2X Material flow so that you can print more with less material. One LW PLA roll equals up to 2.2 ordinary PLA rolls..
[Unlimited Customization]: The LW PLA filament will start expanding with certain printing temperatures above 210 ℃. By adjusting the printing temperature, speed, and flow during your print, you can customize the expansion effect by using different temperatures and speeds in a section on a model for varied density..
[Smooth Finish & Paint Friendly]: Models printed with this LW PLA filament has a smooth matte surface with minimum layer lines. The improved paint adhesion also sets no limit on your creativity..
[Perfect Materials for RC Planes]: The expanding property of this PLA Filament allows for excellent layer bonding, better drop resistance and repairability. In combinat....
IEMAI Carbon Fiber PLA 3D Printer Filament, Carbon Fiber Filament 1.75mm, PLA Filament Spool 1KG, Dimensional Accuracy +/- 0.02mm Black Filament for 3D Printer
IEMAI CARBON FIBER PLA 3D PRINTER FILAMENT - 100% virgin material without cheap plastic fillers, Vacuumed Sealed With Desiccant. Carbon Fiber (containing 20% carbon fiber , in weight) is combined with PLA to form a strong plastic which is ideal for printing items requiring added strength, more abrasive than standard PLA..
PLA Filament -- Material : 80% PLA filled with 20% Carbon fiber . Weight: 1 KG (approximately 2.20 lbs) . Color: Matte Black . PLA filament is made of high-strength, high-modulus fiber material, full mechanical winding and strict manual examination, which guarantee the filaments tidy and easy to be fed. Works perfectly with most FDM 3d printers on the market, such as MK3, Ender 3, Monoprice FlashForge and etc..
PLA 1.75 mm - High Dimensional accuracy - 1.75 mm in diameter, Minimum demission tolerance +/- 0.02mm to ensure consistent feeding and smooth printing. Recommend Printing Temperature: 190℃-220℃/374°F-428°F( dependent on printer model). Recommended Print Speed: 50-100mm/s. Heat Bed temperature: 50 – 60°C/122°F-140°F..
Carbon fiber filament is a tough material with a nice matte finish. The increased strength provided by the carbon fiber particles contributes to greater dimensional stability, helping to avoid warping and....
INLAND REFILL FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print. You can expect the same print quality as Inland PLA+ Filament, without the spool!.
USE LESS PLASTIC WITH PLA PLUS REFILL: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
EASY-TO-USE: Inland Spooless PLA+ Filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland fi....
[Toughness Enhanced & Rigidity]-iSANGHU PLA is a dramatically improved fracture toughness enhanced PLA filament 1.75mm 1kg which has an excellent combination of toughness and rigidity, which can fully meet your needs for high tenacity functional parts printing projects.
[Neat Spool & High Purity PLA Filament]-iSANGHU 1.75 mm filament PLA is made of high purity corn starch with low shrinkage and superb layer bonding. Full mechanical winding and strict manual examination, guarantee the filaments neatly and easy to be fed. There's less pulling and twisting..
[Clog-free & Bubble-Free]-Filament 1.75 pla is Designed and Manufactured with Clog-Free technology which makes filament outflow smoother, and come out homogeneous. High-quality Shiny printing filament pla with a glossy appearance, good shaping, no bubble, no warping, and easy to print..
[Dimensional Accuracy & Consistency]-Advanced CCD diameter measuring and self-adaptive control system in the manufacturing ensure strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm. You don't have to worry about the deformation of the overall structure due to the large change of diameter and uneven printing..
[Low Shrinkage & Good Layer Adhesion]-iSANGHU PLA filament for 3d printer is a worry-free pro....
AMOLEN PLA 3D Printer Filament,PLA Filament 1.75mm,Silk Filament Bundle,Gold, Silver,Bronze, Red Copper,3D Printing Filament Bundle, 200gX 4 Spools
【SILK PLA FILAMENT】 -PLA silk filament is very smooth and shiny, the silky texture, bright colors are focused on this pla filament. There are four colors silk red copper,silk bronze,silk gold and silk silver you can use it to print many beautiful and peculiar object. Silk filament will not disappoint you..
【PREMIUM QUALITY】- Good shaping, strong toughness, no bubble, no jamming, no warping, melt well, feed smoothly and constantly without clogging the nozzle or extruder, silk pla filament, which have premium quality, print Much More Smoothly..
【HIGH COMPATIBILITY 】- Perfectly compatible with most of the FDM 3D Printer and 3D Pen, Comgrow Creality Ender, ANYCUBIC, Creality 3D, SUNLU, ERYONE, MYNT3D, 3Doodler. 1.75mm pla filament diameter, accuracy +/- 0.03mm. Stable diameter accuracy offer you a smoothly feeding experience..
【VACUUM BAG】 - Vacuum packaging with desiccant to keep it dry and keep out dust. Transparent plate makes you more easier to check the color and remaining pla silk filament..
【WARRANTY & AFTER-SALES SERVICE】--Amolen is focus on high quality 3D pla filament, defective filament can be reissued or refunded fully.We provide professional 3D printing technical guidance and good 24/7 customer service..
PLA Max PLA + Bone White PLA Filament 1.75 mm 3D Printer Filament 1KG 2.2LBS 3D Printing Material Stronger Than PLA Pro PLA Plus Normal PLA Filament CC3D Ivory White Bone Color
New Arrival:PLA MAX Filament is made of high-quality Polylactic Acid and with reinforcement technology..
Have higher strength and better toughness,excellent thermal stability than ordinary PLA..
PLA MAX is an upgraded version of PLA Pro filament..
PLA Max filament is different from ordinary PLA, printing temperature is 10-15℃ higher.Especially when printing the first layer..
Industrial & Scientific Additive Manufacturing Products 3D Printing Supplies 3D Printing Filament.
