HEATIT HISD 18-feet Pipe Heating Cable with Built-in Thermostat
...ction. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
HEATIT HISD 15-feet Pipe Heating Cable with Built-in Thermostat
...ction. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
XAREX RPH 120V 12ft, Pipe Heat Cable with Glass Tape, Self-Regulating Pre-assembled Heat Tape with 6ft Cord & Lighted Plug for Freeze Protection of Plastic and Metal Water Pipes Electrical Heat Trace
QUALITY HEAT CABLE - Keeping your pipes/water lines from freezing during the winter,functioning perfectly for all kinds of plastic and metal pipes (including copper, galvanized, ABS plastic, PVC plastic pipes, etc), not suitable for gutters, hoses.
SELF-REGULATING TECHNOLOGY - the cable output will change automatically depend on the ambient temperature, the output goes up when the temp is low and goes down when it's high, saving energy and electricity for you, illuminated plug lets you see if the heat cable is working from a distance.
BUILD-IN THERMOSTAT - you just tape the thermostat in place against the pipe, the cable is able to monitor the temp of your pipes, it will work when the temperature of the pipe below 37°F and turn off when above 50°F, 1.75 away from the plug.
EASY TO INSTALL - pre-assembled for quick installation, the heat cable can be straight-traced or spiral on the pipe, be aware that the lowest installation temperature is 14°F and the maximum exposure temperature is 221°F.
HEAVY DUTY AND SAFECABLE - ETL cerfied, 2FT cold lead and 3FT/18FT heat cable is commercial grade for long-time and heavy-duty usages, PVC out jacket, 3W/ft under 50°F, 1 Year warranty provided, please test the cable before the installation.
JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment..
Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable..
Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap..
ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65..
Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes..
JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment..
Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable..
Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap..
ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65..
Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes..
HEATIT HISD 12-feet Pipe Heating with Built-in Thermostat, Black
...ction. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
HEATIT HISD 3-feet Pipe Heating with Built-in Thermostat, Black
...ction. Tough XLPE as inner insulation and weather resistant PVC (high-low temperature) as out jacket..
Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8” and less than 1 1/2” in. diameter. No crossing. No spiral. No overlap itself. Only straight..
Testing the cable before the installation. Uncoil the cable, plug in the heating cable and then put the thermostat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. To avoid the overheat, please don’t plug in the cable for a long time for testing. When you feel the slight warm, please turn it off..
QWORK Exhaust Pipe Cutter, Cuts 3/4-Inch to 3-Inch Tailpipes and Exhaust Pipes, Universal Exhaust Tailpipe Tube Cutting Pliers, Carbon Steel Tubing Cutter with 14 Blades
High Quality: Premium 1045 steel handle and bearing steel blade, with great wear resistance, corrosion resistance and not easy to break,100% durable material..
Cutting Pipes: The exhaust pipe cutter can cuts pipes with diameters of 3/4inch to 3 inches..
14 Blades: There are 14 blades on each roller for smooth tracking, only 1/4 inch rotation could finish the cutting..
Wide Application：It is suitable for On- and Off-Vehicle Use, apply for cutting most types of pipework, such as copper pipes, aluminium pipes, carbon steel pipes etc..
100% Satisfied Service: Sincerely hope our products could give you a good experience and some help. Within a month you purchase this product, you can enjoy a worry-free return service. And any questions feel free to contact us, we will try our best to help you..
Glarks 85Pcs Pipe Strap Clamp Set M8 M10 M12 M14 M16 M20 M25 304 Stainless Steel Two Hole Strap Heavy Duty Rigid Pipe Strap U Bracket Tube Strap Assortment Kit For Pipe Tube Fixing
...lamps set, it include 8mm(5/16") x 20pcs,10mm(3/8") x 20pcs,12mm(1/2") x 15pcs,14mm(9/16") x 10pcs,16mm(5/8") x 10pcs, 20mm(3/4") x 5pcs, 25mm(1") x 5pcs, total 85pcs are well packed in a plastic box, easy to storage and carry..
♛【High Quality Material】: All the pipe strap clamps are made of 100% 304 stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
♛【Special Slotted Design】: Special slotted design makes the two hole pipe strap is more sturdy and not easy to deform, make the clamps to lay a rigid fixation for pipes on various surfaces like wall, wood, and structures like a circle or cylindrical. Secure your pipes on concrete walls..
♛【Easy to Install】: The pipe strap clamps only need to cooperate with screws can be installed, convenient and fast. resistance to heat up and cold shrink, the surface is polished, anti-oxidation, long-term service..
♛【Wide Application】: The pipe strap is a perfect choice for fixing rubber pipes, oil pipes, plastic steel pipes, gas pipes, stainless steel pipes, indoor and outdoor drain pipes and so on. Also, they can be installed and used repeatedly, and ....
OhLectric Pipe Support Strap - Steel Pipe Strap with 2 holes - Heavy-Duty 1 inch U Bracket - Zinc Coated Tension Tube Clip - Pipe Clamp for EMT Conduits - OL-72860 - 25 PCS
DELUXE QUALITY MATERIAL: Constructed using high-quality steel metal with 1-inch thickness, OhLectric’s pipe straps are sturdy, strong and reliable. Also, have a strong resistance to salt, rust, and corrosion. A must-have water and oil proof clamp for your plumbing needs!.
PRECISE SLOTTED DESIGN: The unique U style design makes our 2-hole pipe strap to lay a firm fixation for pipes on various surfaces like wall, wood, and structures like a circle or cylindrical. Secure your pipes on concrete walls or even on ceilings with these steel metal straps for pipe!.
REINFORCED RIB: Designed to provide the extra strength, our EMT conduit strap has a prominent middle part that holds the heavy load pipes tightly and prevents them from twisting. This strong rib structure makes the clamp suitable for all indoor and outdoor piping needs!.
RIGHT SIZE: Made to fit for all 1-inch pipes, this wide pipe strap is the perfect clamp to hold all types of pipes like PVCs, and EMT conduits, Wire Pipes, Hoses, Electric Lines, or Cables for a panel and frame application. The polished silver-tone color gives the attractive look, making it suitable for humid environments!.
EASY INSTALLATION: Thanks to the high-quality steel material, OhLectric’s metal pipe strap can last for years....
