Best Header Connector

iFlight Mirco BEC 5V 3A / 12V 2A Output Adjustable Step-Down Voltage Regulator 2-6S for FPV Quad Drone Built 3pcs

  • ★ Product Type: High quality male and female housing and 2.54mm female pin header connector compatible with jst-xh connector Kit..
  • ★ Temperature Range: -25 Degree Celsius to 85 Degree Celsius(including temperature rise in applying electrical current)..
  • ★ Easy to use: This set of connector is easy to install, Just put the crimps in the tool and press them, make the crimp the insulation are all the....
  • ★ Widely Application: widely used for speakers, monitors, household appliances, LED lighting, copiers, FAX machines, medical equipment, computers,....
  • ★ Package include: This set include JST-XH 2.54mm Female Pin Connectors 320PCS,2/3/4 Pin male and female housing each 20PCS,5/6 Pin male and female....
Check Stock

Gavemi Fan Splitter PWM Adapter Cable All are 4 Pin Compatible with 3 Pin Fan 1 to 4 Converter for PC Computer Case Fan, 12.5 inches 2 Pack

  • Fan splitter cable for running four 4 pin fans on the pwm fan header on a motherboard.
  • PC fan splitter all are 4 pins, Compatible with 4 pin pwm fan connector and 3 pin fan connector.
  • PWM fan splitter has a 4 pin male connector connected to the motherboard, Are four ''4 Pin'' female pins on the other end to connect to the pwm case fan.
  • Notice:This 4 pin fan splitter cable is not missing a pin and all are 4 pins.
  • Length 12.5 inches , Pack of two computer case fan splitter cables.
Check Stock

EZDIY-FAB USB 3.1 Front Panel Header to USB-C Type-C Female Extension Cable-15inch -45cm (Speed up to 10 Gbps)

  • Type-C extension port for reaching out latest USB-C device, Experience high speed data transfer..
  • The USB 3.1 Gen2 interface, data transfer speed is two times of USB3.0’s, up to 10 Gbps..
  • Connector1: Type-C Female with PCIE bracket.
  • Connector2: USB 3.1 Front Panel Type-E Header.
Check Stock

ITROLLE Fan Adapter Cable 4PCS 17.5cm/6.89inch 5 Pin to 4 Pin Fan Connector Converter Jack CPU Cooling Fan Extension Cable Wire

  • This cable is compatible with all 4 pin and 3 pin case fans !!!.
  • Sleeved in Black Braiding With a 4 Pin Female Connector at One End and Splits to 4 Male Connectors at The Other End ( 1 of them is 4pin ,3 of them is 3pin ). The fan adapter has only one connector with a yellow RPM speed/tachometer line.
  • The Fan Splitter Connects 4 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector.
  • The Fan Splitter Cable Provide Additional Fan to increase Airflow in Your Computer Case.
  • The length of the product (Approx): 10,5 inches, Color: Black.
  • !!! 4 pin extension cable - ASIN ‏: ‎B085MJPFVC !!!.
Check Stock

BTF-LIGHTING Neon WS2812B IC LED RGB PC Light Strip 2PCs 19in Individually Addressable LED Strip for 5V 3-Pin RGB LED headers for Asus Aura, Asrock RGB Led, Gigabyte RGB Fusion, MSI Mystic Light

  • ...is suitable for fixing it on any dry and flat surface without any screws or clips. The full kit comes with all the essential parts you may need for your computer. All in one kit, just hook them up, plug and play. Chainable design, you can expand the length by adding more strips..
  • 【Package includes】1 To 2 3PIN-SM Connector, 1X 3PIN (+5V Data N/A GND )ADD header, 1X 3PIN (+5V Data GND )ADD header, 2X LED strip(Each 19in) IP30 Non-waterproof.Please NEVER connect it to 4pin 12V RGB_HEADER (12V, G,R,B). Otherwise you will destroy the entire led strip..
Check Stock

LukLoy 2x4 Joist Hanger 20 Gauge Galvanizing Face Mount Joist Hangers for Wood 10 Pack

  • ✅ HEAVY DUTY - LukLoy 2x4 joist hangers are made from 20 gauge galvanized steel for extra rust and corrosion resistance, creating a stronger, long-lasting joist-to-header connection..
  • ✅ MULTI USE: The joist hanger is designed for joist-to-header installation in wood-framed constructions like roofs, decking, floors, and ceilings. Joist hangers are much stronger than using nails or screws alone. They are also easier to fit and relatively cheap given the length of time they will last..
  • ✅ Easy Install: This joist hanger has speed prongs to temporarily position and secure the connector for easier and faster installation..
  • ✅ SIZE: For nominal lumber 2 x 4 (actual size 1-1/2″ X 3-1/2″), The package includes 10 pieces joist hangers..
  • ✅ 2 YEARS REPLACEMENT GUARANTEE! - If you have any questions or dissatisfaction with our products or services, please feel free to contact us by email, we will give you a satisfactory answer within 24 hours..
Check Stock

SunFounder R3 BoardBundled with Mega 2560 R3 ATmega2560-16AU Board for Arduin

  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory..
  • R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
Check Stock

Fluval Rim Connector for FX5 High Performance Canister Filter

  • Fits Fluval FX5 high performance canister filter model A218.
  • Rim connector includes 3 hose holding clips and 2 o-rings.
  • Comes in polybag with fluval header and UPC label.
  • Measures 1 8/9 inch length by 6 inch width by 10 inch height.
Check Stock

GPIO Status LED Terminal Block Breakout Board for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B

  • GPIO status LED and power 5V / 3.3V indication..
  • GPIO output or input level high LED on, output or input level low LED off. 5V blue, 3.3V red, GPIOs green. The position of the LED is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. The driving current of each LED is only 0.1mA, so you don't have to worry about it affecting the read and write status of GPIO..
  • Support for Raspberry Pi A+, 3A+, B+, 2B, 3B, 3B+, 4B.
  • Terminal block pitch 3.5mm, wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper. 2 x 20 pins expansion pin header, height 8mm..
  • Packing list: 1x terminal block breakout module, 4x M2.5x16mm nylon standoffs, 4x M2.5x6mm nylon standoffs, 4x M2.5 nylon nuts(NOTE: the item not include Raspberry Pi module).
Check Stock

PWM Fan Splitter,TeamProfitcom 4 pin Adapter Cable Sleeved Braided Y Splitter for Desktop Computer CPU Fan Splitter PC 4 Pin Fan Extension Power Cable 1 to 4 Converter 10 inches (2 Pack)

  • This cable is compatible with all 4 pin and 3 pin case fans !!!.
  • Sleeved in Black Braiding With a 4 Pin Female Connector at One End and Splits to 4 Male Connectors at The Other End ( 1 of them is 4pin ,3 of them is 3pin ). The fan adapter has only one connector with a yellow RPM speed/tachometer line.
  • The Fan Splitter Connects 4 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector.
  • The Fan Splitter Cable Provide Additional Fan to increase Airflow in Your Computer Case.
  • The length of the product (Approx): 10,5 inches, Color: Black.
Check Stock