kenddeel Headphone Plug Extraction Tool- Remove Broken Headphone Plug from Headphone Jack of Mobile Devices
️Applicable To :all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks..
️Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover..
️Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small,You need to plug it in deep enough..
️Tep: This set of headphone jack remover tool is considered a single-use tool..
️If you have any question, please feel free to contact us by email..
Skullcandy Crusher Wireless Over-Ear Headphone - Deep Red
Only fit with quest 2 stock strap and elite strap, NOT fit third party straps,clip-on adapter headphones accessories,Specially designed the headphone....
Each Headphone features a high quality 40mm dynamic driver and Imitation protein earmuff to look great with the Oculus Quest 2 Gen.These Headphone....
New clip headphone with 15 cm wire cable ,Single sound channel earphones marked L/R, bulit-in with a 40mm dynamic driver and support frequency....
Single Channel Separate Left and Right Calibrated Headphones Deliver Stereo 3D 360 Degree Sounds – Calibrated by Direction and Distance..
Including 1 pair Headphone(Only for Oculus Quest 2Gen, NOT FOR OCULUS QUEST 1 GEN).
AKG K182 Recording Studio Monitor Headphones+Rechargeable Headphone Amplifier
Package Includes: (1) AKG K182 Professional Closed-Back Recording Studio Monitor Headphones/Swivel. (1) RockvilIe HeadRock Battery Powered Rechargeable Personal Headphone Amplifier Amp. Features: AKG K182 Professional Closed-Back Recording Studio Monitor Headphones. Audio Frequency Bandwidth: 10 Hz - 28 kHz. Sensitivity: 112 dB SPL/V. Max Input Power: 500mW. Input Impedance: 32 Ohms.
Product Weight: 0.56 Lbs. Cable Length: 3 meters. High Sensitivity 50mm Transducers: Provide great sound even with mobile devices. Headphone Type: Closed-Back. Over Ear Design with replaceable ear pads. Detachable cable and screw-on adapter. Foldable. Detachable Cable. Applications: Studio Monitoring, Studio Mixing, Live Performance, Drummer, Mobile Devices. Includes: (1) x headphone amp.
(1) x Micro USB cable. (1) 3.5mm male to male audio jack cable. Manual and warranty card. Features: RockvilIe HeadRock Battery Powered Rechargeable Personal Headphone Amplifier. 3.5MM headphone output. 3.5MM aux input for music player. Lithium Battery with 800mAh capacity. Rechargable battery lasts 5-8 hours per charge. Headphone Amplifier Works with 16 300 Ohm Impedance.
Dual 3.5mm Headphone Jack Adapter, 4 in 1 Headphone and Charger Audio Splitter, Headphone Splitter for Phone 12 / 11 Pro / XS / XS Max / XR / X / 8 / 7, Support Music & Calling
【Lossless Audio Output】The headphone splitter uses 100% copper core to provide lossless digital sound quality, allows up to 48 KHZ, 24 bit audio output, keep original headphone sound quality, enjoy stable and lossless audio experience for entertainment..
【Multi Function】The 4 in 1 headphone splitter support listen to music and charge your phone at the same time, audio headphone jack (support music & call & wire control) + dual 3.5mm headphone jack (only support music) + charging port (only support charging). Note: audio headphone jack(music & call & wire control) and 3.5mm headphone jackcan not be used at the same time..
【Fast Charging】The dual headphone adapter is also designed with 2.4A quick charge capability, the charging speed is increased by 1.5 times. No worry about run out of battery when listening to music or watching videos..
【Quality Assurance】We provide 30 days money back guarantee, 1 year free replacement warranty and 24 hours friendly customer service. If you have any questions, please feel free to contact us..
【Wide Compatibility】The 4 in 1 audio and charge adapter is compatible with Phone 12 / 12 Mini / 12 Pro / 12 Pro Max / 11 Pro / 11 Pro Max / XR / XS / XS Max / X / 8 / 7 / 6 Plus, Pad, Pod and a....
Monoprice BT-300ANC Wireless Over Ear Headphones - Black with (ANC) & Bluetooth 5 Transmitter & Receiver with aptX, aptX Low Latency, AAC, and SBC Codecs, Up to 15 Hours of Audio Playback
...he external microphones "listen" to the environment and then generate a reverse phase signal that eliminates background noise and lets the music take center stage..
Product 1: Extended Playtime: Experience up to 16 hours of playtime or 18 hours of talk time. Don't miss a call! You can answer incoming calls with your headphones and your music will automatically resume when the call is finished..
Product 1: Portable Build: This headphone features a foldable, highly portable design. Plush, soft earpads, an adjustable, padded headband, and a soft touch texture make these headphones an easy companion while on the go..
Product 1: Driver Size: 40mm Neodynium | Frequency Response: 20Hz ~ 20kHz | Sensitivity: 118 plus minus 3dB (1kHz @ 1mW) | BluetoothVersion: 4.0 | Bluetooth Range: Up to 32 feet (10 meters) | Supported Bluetooth Profiles: A2DP, AVRCP, HFP, HSP.
Product 2: Bluetooth 5: Qualcomm aptX Low Latency audio ensures your Bluetooth wireless enabled device can deliver sound in sync with visual media. It reduces delay and improves end-to-end speed of the audio transmission, resulting in a synchronized user experience..
Product 2: Use the Transmit mode to stream audio from your TV or Blu-ray Disc player to a Bluetooth speaker or use the receive mode to transf....
3.5mm Headphone Jack Audio Adapter Fast Charge Splitter,3 in 1 Headphone and Charger Audio Adapter Splitter for iPhone 11/X/8/8 Plus/7/7 Plus (White)
【We can promise】If the product has any questions, feel free to contact us.You will get a satisfactory answer within 24hrs.
【Hi-Fi Voice Audio】Better sound–built in DAC smart chip contacts ensure the cleanest sound experience,support 96 KHZ and 24-bit audio output for Iightning headphone and 3.5mm headphone audio..
【Widely Compatible】Support iOS 13.Support All Apple Phone/Pad Devices(Phone 11/8plus/8/7plus/7/X/Xs/Xr).Don’t need additional audio software,just plug and enjoy music with your Iightn-ing headphone or 3.5mm headphone at any time..
【2.4A Fast Charging】Charging speed increases by 1.5 times with a more efficient cable. No worry about run out of battery when you listening music or watch videos..
【Dual Headphone Audio Jack】Supports charging and audio output,you can listen to music with the Iightn-ing headphone audio or 3.5mm headphone audio while charging ♥Not support two headphones audio work at the same time♥.
Full Aluminum Headphone Stand Headset Holder Gaming Headset Holder with Non-Slip Silicone Earphone Stand for All Headphone Sizes (Black)
✔ Compatible All Size Headphones -- Link Dream aluminum headphone stand can fits any type of headset overall, especially for your big gaming headset..
✔ Soft TPE Pad Protection -- The headset holder's pad works as a cushion to protect your headphone headband from deep crease even after long time hanging.
✔ Solid Sturdy Base -- The vast dense base provides stability so that headphone stand won't waving about or tip over.
SILICONE PADS at the bottom ensure a superb grip on glossy surfaces.
✔ Advanced Aluminum avoid scratch -- Aviation aluminum via precise cutting through CNC molding,hand-polished.NOT ANY CHEAP PLASTIC..
✔ No falling off -- Metal made headphone stand ensure that the headphone stand won't falling off when you hang on a heavy headphone..
BRAINWAVZ Cradle Large - 2PK - Headphone Stand Holder, Universal Hanger for Sennheiser, Sony, Bose, Beats, AKG, Audio-Technica, Gaming Controller, Cables, Gamepad & Other Gaming Accessories Hook
STYLISH DESIGN: Keeps your headphones out of clutter and easy to reach. Designed by headphone manufacturers for optimal storage for your headphone with minimal long term indentation on your headphone head band..
CURVED BED: Unlike other headphone hangers, the Brainwavz Cradle has a curved bed in order to better hold your headphone without leaving indents on your head band..
HOLDS SECURELY: Using the same 3M VHB tape, the same adhesive as GoPro, reliable and long term adhesion on most surfaces. If you need to move the headphone stand after placement please use a hair dryer to heat up slightly the pad and then remove stand from wall. Max Weight Linit: 1.5kg / 3.3lbs.
COMPATIBLE AND WARRANTY: Universal compatible with most headphones and gaming headset, including Beats, Shure, Sennheier, AKG, Audio Technica, Sony, Philips, Hyper X & More. Please check dimensions of headset hanger bed and compare with the width of your headband to make sure our stand is compatiable with your headphone..
AOYUTC Metal Tube Headphone Plug Extraction Tool- Headphone Tip Removal Tool,Remove Broken Headphone Plug from Headphone Jack of Mobile Devices
PRODUCT COMPOSITION: This headphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes....
30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This....
HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table.....
HOW TO USE: Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull....
GUARANTEES: This set of headphone removal tool is considered a single-use tool. But we offer a 100% satisfaction guarantee. If you are not satisfied....
