Farewell to thinner wires and cheaply made, this alternator pigtail was made of quality wires (The white wire is 14 gauge and the red one is 10 gauge).
Build in the cross linked polyethelene high temperature TXL with 100% copper wires, replace it with this pigtail to make a good connection on the alternator.
Plug and play, easy to replace the old frayed connector, there is plenty of lead length to make your repair or connection.
This alternator pigtail generally fits AMC, Buick, Cadillac, Checker, Chevrolet, GMC, International Harvester, Jeep, Olds mobile, Pontiac vehicles.
This pigtail connector for the alternator may fit other models and applications, For additional product information please refer to items specifics or contact us.
Round Gas Range Oven Ignitor for GE 41-208 ER4342528 SGR401 SGR400
...s not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
Description:Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube..
Gas Oven Bake & Broil Round Igniter for WB2X9154 4342528 Ignitor AP2014008, PS243425
...s not start within 90 seconds, the glow bar is likely the issue. Do not be fooled if the glow bar turns red. If it does not reach the appropriate temperature, the oven will not light. If your ignitor uses a connector on the end, reuse the connector from the old ignitor..
Description:Use your wire cutters to cut the wires on the old ignitor several inches above the connector. Strip the ends of the wires with a wire stripper. Place the end of a wire on the connector next to the end of a wire on your new ignitor. Use a ceramic wire nut to twist and hold the wires together. Your wires are not color coded, so it does not matter which wires are connected together. Your old ignitor can get very hot even if it doesn’t ignite the burner tube..
WGGE WG-011 Test Lead and Safety Alligator Clips,Multimeter Test Leads Kit CAT III 1000V & CAT IV 600V with Threaded Alligator Clips, 4mm Test Lead Probe Tip. (WG-011)
✅ Test lead x2, Threaded Safety alligator clip x2 , Threaded alligator clips x2, two different colors (black, red).
✅ Two PVC insulation lead wires with two threaded probe tips, two threaded alligator clips and two safety alligator clips.
✅ The test lead wire - 40 inches , test lead length- 47inches, Shrouded 4mm banana plugs- ends test lead We use high-quality materials ensures that the test leads are durable, flexible, and resistant to freezing and heat.
✅ Safety alligator clips' jaw opening is 0.5'', Material: nickel-plated brass clip,glass-filled nylon housing (Safety alligator clip dimensions 49mm x 10mm x 7mm). Threaded alligator clip: 8-32 threaded barrel connection, Jaw open 0.31” (7.9mm) Max, Material: nickel-plated steel, Rating: 10 Amps (Threaded alligator clip dimensions 65mm x 20mm x 20mm).
✅ International Electrotechnical Commission (IEC) certified for category III installations up to 1,000V. Test lead set connects a compatible electrical test meter to a device for testing. HIGH QUALITY 12 months manufacturer warranty and 24/7 hours WGGE customer service.
EASY GRIP. Plugging in your trailer wiring and trailer lights is easy with the ergonomic design of this trailer plug. It features two hooks on either....
WEATHER-RESISTANT. This trailer wiring plug comes with concealed wire terminals. This helps protect the splice-in connection points for the wires,....
RELIABLE CONNECTION. This 7-pin trailer wiring plug comes ready to splice into your existing trailer wiring. It can be used to connect the taillights,....
VERSATILE DESIGN. This connector makes a great replacement 7-way RV blade harness and is interchangeable with virtually any 7-way RV connector. 7-pin....
READY TO INSTALL. Equipped with blunt-cut, color-coded wires, this 7-pin trailer wiring plug comes ready to install. The 6-foot wire lead provides....
