6D Carbon Fiber Vinyl Self Adhesive Film, High Gloss Black Carbon Fiber Vinyl Wrap Sticker Wrap Roll with Air Bubble (1ft x 10ft)
SIMPLE OPERATION:6D High Gloss Black Carbon Fiber Vinyl Wrap easy adhesion, durability, heat insulation, with air bubble free, high gloss, a strong sense of reality, suitable for a temperature difference of - 40 ° C ~ + 180 ° C, the novice can also use it quickly.
MATERIAL: PVC material,flexible even at room temperature, can be installed directly. Creases and air bubbles can be removed by applying heat and using a squeegee, the product will be more flexible, can be applied to the curved surface, and easy to attach.
WITH AIR BUBBLE RELEASE: 6D High Gloss Black Carbon Fiber Vinyl with air bubble, can easily release air and install, even beginners can also use car film easily. It can be installed directly at room temperature,Creases and air bubbles can be removed by applying heat and using a squeegee, which will make the sticker more flexible and easy to use, Does not leave adhesive residue behind when removed.
WIDE APPLICATION: 6D High Gloss Black Carbon Fiber Vinyl Wrap product is very suitable for DIY, It can be used not only for the exterior of the car, but also for the interior, Bicycles, motorcycles, smart phones, tablets, furniture, all smooth surfaces can be used.
MULTIPLE SIZES AVAILABLE: The size of the 6D carbon fiber car wrap vinyl roll is 30*....
24"x24"x 1/8" ABS Plastic Vacuum Forming Sheet Textured Front Smooth Back
▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in 1.5 seconds. Two modes: I: 50-450℃, 190-210L/min.
▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 122℉ to 1202℉.
Our heat gun also possess overload protector to avoid damaging your heat gun and circuit.
▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders.
Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose.
▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface.
Two concentrator nozzles direct a concentrated heat flow to the work surface.
Reflector nozzle disperses heat flow evenly around the whole work surface..
VViViD Air-Tint Dark Black Headlight/Tail Light Window Tint (12 Inch x 24 Inch 2-roll Pack)
VVIVID Air-Tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. They include an air-release membrane which allows you to install the tint dry ( without installation liquid ) Ready to use out of the box!.
This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape..
This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you’re done! its literally that simple!.
Made with automotive grade cast vinyl, these tints are 80% tinted smoke or 20% VLT. The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights..
NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHTS AND ORDER ENOUGH VINYL TO WRAP THEM.
GunSkins Pistol Accent Skin - Premium Vinyl Gun Wrap with Precut Pieces - Easy to Install and Fits Glock - 100% Waterproof Non-Reflective Matte Finish - Made in USA - GS Thin Blue Line
FITS ANY GLOCK – Pistol Accent Skins conform to any shape. Designed to fit any semi-automatic pistol, even airsoft guns. The kit includes pieces for....
EASY TO INSTALL VINYL WRAP – Do it yourself installation means you have creative control. Choose how much or how little to wrap with the help of our....
WATERPROOF NON-REFLECTIVE MATTE FINISH – GunSkins are made from high-performance, premium vinyl. This automotive grade vinyl is 100% waterproof and....
REMOVEABLE AND LEAVES BEHIND NO RESIDUE – This non-permanent finish will not alter the resell value of your gun. If you need to take it off, simply....
LIFETIME WARRANTY – This GunSkins product has a Lifetime Warranty which covers normal use by the initial user of this product. This GunSkins product....
VViViD Air Tint Golden Yellow Headlight/Tail Light Window Tint (17.9 Inch x 48 Inch Large roll)
This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape..
This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you’re done! its literally that simple!.
Made with scratch-resistant automotive grade cast vinyl, VVIVID Air-Tints were developed in Canada to reduce the risk of shrinkage and peeling almost completely! The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights..
NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHTS AND ORDER ENOUGH VINYL TO WRAP THEM.
TR Industrial-Grade 4-Piece Electric Demolition Jack Hammer, with 3 Bits - Point, Flat, Scoop Shovel Spade Bit
▶ 【Strong Power With 2 Modes】 SEEKONE 1800W heat gun provides strong power quickly heat up to 1202℉(650℃) in 1.5 seconds. Two modes: I: 50-450℃, 190-210L/min.
▶ 【Variable Temp Control & Overload Protection】 Unlike other dual temperature heat guns, our heat guns provide variable temperature control. The black dial provides rheostat-type heating, the high / low switch on its handle provides air flow control. Temperature range from 122℉ to 1202℉.
Our heat gun also possess overload protector to avoid damaging your heat gun and circuit.
▶ 【Scientific Ergonomic Design & Wide Applications】 Seekone heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries and other musculoskeletal disorders.
Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose.
▶ 【Four Nozzles Accessories】 Deflector nozzle directs a long, narrow heat pattern to the work surface.
Two concentrator nozzles direct a concentrated heat flow to the work surface.
Reflector nozzle disperses heat flow evenly around the whole work surface..
VViViD Air-Tint Matte Black Headlight/Tail Light Window Tint (12 Inch x 24 Inch 2-roll Pack)
This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape..
This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you’re done! its literally that simple!.
Made with scratch-resistant automotive grade cast vinyl, VVIVID Air-Tints were developed in Canada to reduce the risk of shrinkage and peeling almost completely! The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights..
NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHTS AND ORDER ENOUGH VINYL TO WRAP THEM.
VViViD Air-Tint Emerald Green Gloss Vinyl Headlight Foglight Transparent Tint Wrap Self-Adhesive 12 Inch x 24 Inch 2-roll Pack
VVIVID Air-Tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. They include....
This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap....
This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl....
Made with automotive grade cast vinyl, these tints are 80% tinted smoke or 20% VLT. The adhesive is acrylic based which will not eat through plastic....
NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHTS AND ORDER ENOUGH VINYL TO WRAP THEM.
Heat Gun for Crafts, Huepar Tools 446°F/752°F Mini Dual Temp Hot Air Gun Tool for Shrink Wrapping, Embossing, Candle Making, DIY, Including 164PCS Heat Shrink Tubes, 2 Silicon Brushes and 2 Nozzles
【Various Accessories】(1) 164PCS heat shrink tubes of different sizes help you better complete the shrinking work.
(2) 2 Silicon brushes make it easier to evenly apply resin and epoxy resin to the flash cup.
(3) Fishtail nozzles and hook nozzles can handle different situations, such as Shrink Wrapping, Vinyl Wrap and Shrinking Tubes. A variety of accessories can be combined and matched to make your handicrafts convenient and efficient..
【Variable Speed & Heat】 Huepar Tools mini heat gun HG35 has dual temperature and speed settings - 446°F(230°C) low speed & heat for delicate or detail work.
752°F(400°C) high speed & heat for heavy duty or high volume work. Two different adjustable temperatures allow the HG35 mini hot air gun to meet your different work requirement..
【Powerful Motor and Fast Heat Dissipation】The HG35 mini heat gun has a high-power motor, which can quickly heat up in a short time. 446°F(230°C) low speed & heat can reach 180L/min, 752°F(400°C) high speed & heat can reach 250L/min. The hollow design on both sides of the tail of the heat gun can ensure the rapid heat dissipation of the product..
【Ergonomic Design】The HG35 mini heat gun has a streamlined design, compact, lightweight & low-noise. The sides of the fuselag....
Silence Shopping 3D Black Carbon Fiber Vinyl Wraps Car DIY Wrap Vinyl Roll Film Self-Adhesive Twill Weave Sheet Sticker 127X30cm/50 X11.8 (Black)
❖ GOOD QUALITY: The black 3D carbon fiber vinyl wrap is made with automotive high polymer PVC that is used for wraps and conforms well to medium curve contours and shapes.
when applied correctly to the appropriate hard surface the film is very durable.
the car wrap sticker roll protects your paint from scratches and wear.
❖ EASY INSTALLATION: Can be easily re-positioned and stretched for exact fitment and is soft enough to conform to all edges/contours/shapes.
any creases/folds air bubbles can be removed by applying hairdryer or heat gun and using a squeegee.
❖ SUITABLE SIZE: The size of the carbon fiber car wrap vinyl roll is 1.27m x 30cm.
the carbon fiber vinyl film is water resistant and not easy to change color, this car wrap sticker roll can be quickly removed without leaving glue marks.
suggest use a hair dryer to heat it up to make it stick tighter and firmer.
❖ ECONOMICAL ALTERNATIVE TO PAINT: It is a perfect solution for refreshing your car / home appliance / gadget.
it saves you both the time and hassle of any painting job.
our wrap vinyl is a must have for cars and bikes.
❖ WIDE APPLICATION: Our car wrap sticker roll can be applied to cars hoods, boots, roofs, dashboards, gauges, interior, amplifiers, wheels, mirrors, door handles, g....
