Best Heat Treated Steel

Mclane/PowerTrim 10 x 1/2 Hole Edger Blade Rep Part# 2059 Made in U.S.A 5Pack

  • 10" x2" Edger Blade with 1/2" Shaft Size 2MM thick, Part# 2059-10.
  • Blade is perfectly balanced, won't damage the arm on your edger..
  • 100% original Blades made from U.S. Heat Treated Spring Metal.
  • Exact blades that are installed on new Mclane and Power Trim edgers coming off the line.
  • Tempered Heat Treated U.S. Steel, not sharpened, does not need to be sharpened the metal is already sharp and will take shape as you use it..
Check Stock

Crescent 8\ Pro Series Dual Material Lineman's Compound Action Cutting Pliers - PS20509C

  • Compound leverage design increases cutting and gripping pressure by 50%.
  • Chrome vanadium steel for increased durability.
  • Heat-treated joint rivet for smooth and consistent operation.
  • Induction-hardened edges for a long cutting life.
  • Compound leverage design that increases cutting power by 50-Percent.
  • 1/3 lighter than standard pliers, reduces fatigue.
  • Heat treated joint rivet for smooth and consistent operation.
  • Induction hardened edges for long cutting life.
Check Stock

Bikehand Bicycle Bike Pedal Remover Wrench Cone Spanner- Great Road Mountain Bike Pedal Removal Tool Spanner - 15mm 16mm 17mm

  • SIZE: 15mm Wrench to install and remove pedals without scratching the crank arms. 16mm and 17mm for the Cone Spanner. Length: 278 mm. Weight: 305g /10.8 oz..
  • HEAT TREATED: Heat treated high quality steel constructed for long time using. Professional Bicycle 15mm wrench for installation and removal of pedal without scratching the crank arms..
  • PRECISELY MACHINED: The slots are precisely machined extra heavy duty steel to match the pedal spindles or bolts perfectly..
  • NON SLIP HANDLE: Non-slip rubber hand-grip for ease of use..
  • ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a life time warranty! Made in Taiwan..
Check Stock

Oumers Bike Chain Tools Kit, Upgrade Rotor Lockring Removal Wrench & Chain Whip with Cassette/Bicycle Flywheel Remover Sprocket Remover Tool Pack

  • This bike repair tool kit combination chain whip and upgrade freewheel/lockring remover wrench. Both are in high quality, heat treated to prevent bending and flexing.
  • Designed to be used in conjunction with the cassette lock ring tool to remove cassettes from hubs. Sprocket Remover can also be used to tighten on screw-on freewheels, Caters for 8, 9 and 10 speed cassettes.
  • When remove flywheel, fixed wheel to prevent from damage.Constructed from steel for durability. Easy and convenient to operate.
  • Silver color chain whip with orange non-slip coated handle for comfort and ease of use. It is constructed from steel for durability.
  • Cassette/rotor lockring removal tool is made of heat treated alloy tool steel, fits for any brand 12 teeth splined type freewheels, like Shimano, Sachs Aris, Sun Race, SRAM, SunTour, Chris King and other cassette lockrings. Also fits Shimano disc brake lockrings and so on.
Check Stock

Century Drill & Tool 04433 Cobalt Bi-Metal Hacksaw Blade Set, 3 Piece, 12-Inch

  • Set includes 18T by 12-Inch, 24T by 12-Inch and 32T by 12-Inch cobalt bi-metal hacksaw blades.
  • Cobalt bi-hard hacksaw blades offer a unique design that stays cooler and remains sharper while cutting harder materials like steel or hard metals.
  • One piece construction cannot edge strip and avoids any of the weld line problems associated with bi-metal blades.
  • Century’s staged heat treated process creates the strongest teeth while the backbone is heat treated to a lower degree enabling its flexibility.
Check Stock

PPE Race Fuel Valve for 2004.5-2010 Duramax LLY/LBZ/LMM 113073000 with PPE Viton O-Ring Upgrade for PPE Race Fuel Valve

  • The PPE Race Fuel Valve (heat treated stainless steel construction) replaces stock or a shimmed pressure relief valve..
  • This valve helps maintain fuel rail pressure during high engine load conditions by completely blocking the pressure relief port (effectively eliminating fuel return to the fuel tank). It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient PRV spring pressure..
  • Kit Includes PPE Viton O-Ring 1137073001.
Check Stock

Brewing Trouble: A Paranormal Women’s Fiction Novel (Crow’s Feet Coven Book 2)

  • 【HIGH QUALITY MATERIAL】The material of the crowfoot wrench is carbon steel, heat-treated, chrome-plated surface. The material of the ratchet handle is carbon steel, heat-treated, knurled, electroplated, round head handle..
  • 【SPECIFICATION】3/8” Square drive open end crows foot wrenches – Sizes included (SAE/Standard): 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 ”..
  • 【EXTEND YOUR REACH】These handy problem solvers give you more options when you are trying to get at fasteners in tight awkward spaces..
  • 【EASY STORAGE】Mounted on a convenient storage rail. Each wrench size is permanently stamped for simple identification..
  • 【WIDE APPLICATION】Crow’s feet wrench adapters speed up installations & removals fitting perfectly on any 3/8” drive ratchet extension or torque wrench reaching inaccessible fasteners that sockets can’t get to – Great for car automotive & truck work in tight engine/radiator areas like o2 sensors or for underneath sink/toilet work like faucet spray hoses..
Check Stock

30 Piece Hex Head Allen Wrench Drill Bit Set, 1/4 Inch Hex Shank Metric and SAE S2 Steel Hex Bit Set, Magnetic Tips 50mm Long (SAE+METRIC HEX BITS)

  • ▲ 【HIGH PRECISION & HIGH HARDNESS 】 30 Piece Hex Head Allen Wrench Drill Bit Set. Crafted and Designed with Heat-treated S2 alloy steel bits for increased torque and unmatched hardness. The results of tests show that the maximum torsion force of bits are 180-200N and the hardness of bits are 60±2HRC. The high torsion and proper hardness avoid the bits break and wear..
  • ▲ 【MAGNETIC & ANTI-RUST 】 30 pieces of bits are magnetic tips so they can hold screws easily.Complete rust and corrosion resistance with fully polished, Chrome plated mirror finish bits treatment..
  • ▲ 【LONGEVITY & 100% RISK-FREE】 Heat-treated S2 alloy steel bits, Reduce wear-outs. Hardened treated Chrome Vanadium steel sockets, Increase turning power..
  • ▲ 【Metric and SAE S2 Steel Hex Bits Set】 [METRIC]：15 Pack Metric hex bits, Sizes - 1.5mm, 2.0mm, 2.5mm, 2.5mm, 3.0mm, 3.0mm, 3.5mm, 3.5mm, 4.0mm, 4.0mm, 5.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm. [SAE]：15 Pack SAE hex bits, Sizes - 1/16", 5/64", 3/32", 3/32", 7/64", 1/8", 9/64", 5/32", 5/32", 11/64", 3/16", 13/64", 7/32&q....
Check Stock

LEXIVON 9-Piece Impact Grade Socket Adapter Set - 3\

  • ENJOY OUR QUALITY 9-PIECE SAVING PACKAGE - The 3, 6 & 12-inch impact driver socket adapters, made of heat-treated Chrome Vanadium steel and organized in a convenient holder..
  • ACTIVE RUST & CORROSION PROTECTION since they are treated with a rust-proof Black Phosphate coating for enhanced durability under any circumstances..
Check Stock

Set of 20 Veritek 14x1.5mm Chrome 7/8 22mm Hex Duplex Acorn OEM Style 1.5 Inch 38.5mm Lug Nuts for Factory Wheels

  • Hex: 22mm Heat Treated For OEM Factory Dodge Chrysler Wheels.
  • 10.9 Grade Heat Treated Steel Construction.
  • Through-Hardened For Maximum Durability and Tensile Strength. Meets or Exceeds OEM Factory Standards.
Check Stock