Best Heatsink Adhesive

NVMe M.2 SSD Cooler Heatsinks with 20mm Fan Powerful Cooling…

Compatible with PCIe NGFF NVMe Key-M Key-B M.2 SSD Size: 0.87 x 3.15in. (22 x 80mm), fits for 850 EVO, 860 EVO, 960 EVO, 950 PRO, 960 PRO, etc..
20x20 FAN: 10000 rpm high-perfermance fan, low noise and no vibration, with 10°C - 30°C cooling effect (Varies depending on the environments).
5V Power Supply: 15PIN SATA Power interface, 1W power consumption..
Heatsink Design: Groove design, greatly increase the heat dissipation area. Aluminum alloy material, silver plating, anodic oxidation surface treatment. M.2 SSD Heatsink size: 0.94 x 2.95 x 0.24in. (24 x 75 x 6mm), net weight: 0.78oz / 22g. Thermal conductivity of the heatsink: 560W/mK, minimum installation height requirement: 10mm, ONLY FIT FOR DESKTOP.
Unique Nano silicone thermal pad. Soft and good ductility, compatible with uneven surfaces.
Low viscosity, no damage to the M.2 SSD warranty label..

AMD AM4 socket: Ready for 2nd and 3rd Gen AMD Ryzen processors to maximize connectivity and speed with up to two M. 2 Drives, USB 3. 2 Gen2 and AMD StoreMI.
Enhanced power solution: military-grade TUF components, ProCool socket and Digi+ VRM for maximum durability.
Comprehensive Cooling: Active PCH heatsink, VRM heatsink, M. 2 heatsink, hybrid fan headers and Fan Xpert.
Next-gen connectivity: Dual PCIe 4. 0 m. 2 and USB 3. 2 Gen 2 Type-A/Type-C.Operating system:Windows 10 64-bit.
Gaming Networking: Exclusive Realtek L8200A Gigabit Ethernet, Intel 2x2 802. 11ac Wi-Fi with MU-MIMO support, Bluetooth 5. 0, TUF LANGuard and technology.

Heatsink Compatible with Dell Alienware Aurora R11 R12 Desktop..
Compatible Part Numbers: N1C1D, 0N1C1D, CN-0N1C1D, HTSNK VR CPU R11 125W..
VRM heat sinks are critical to keeping your system running at peak efficiency and minimizing costly downtime and repairs..
VRM HeatSink is the component that converts your 12V voltage to the voltage you need for your CPU..
Each package is equipped with 1x VRM Voltage Regulator Heatsink..

Lower Cost than Dual Fan, Single Fan Version Heatsink Fan.
It Can Compatible with Many Single Board Computer (Just pay attention to the Size of the Heatsink).
Efficient drop temp of your Pi by using our heatsink fan..
Custom 3M heat conductive strip can make sure your Pi works stable when you are overclocking..
Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough..

【Passive Cooling Aluminum Alloy Case】Geekworm Raspberry Pi 4 Case - P330 is designed for Raspberry Pi 4 Model B computer only, support Raspberry Pi 4B 1GB/2GB/4GB/8GB version.
Cool your Raspberry Pi 4 without fans and noise..
【Add Copper Heatsink for Better Cooling】Equipped with a CPU copper heatsink(to replace the thermal pad) to attach with CPU grease on CPU of Pi4 for better heat dissaption (Not include CPU grease).
【High Quality Aluminum Material】Sturdy and durable, keep your Raspberry Pi 4 free from scratches, dust and damage..
【Easy Access to Raspberry Pi 4 Ports】Easy installation. Easy access to all Raspberry Pi 4 ports, such as GPIO, Micro HDMI, TF Card, USB-C Power Supply ".
【Packing List】1 x Raspberry Pi 4 Aluminum Alloy Case, 1 x Copper Heatsink, 1 x Screws Pack 【Note】NOT include raspberry pi board.

【Heatsink Size】20 x 15 x 10mm/ 0.79" x 0.59" x 0.39" with a M3 screw holes..
【High Quality】Made of silver anodized environmental aluminum profiles, good thermal conductivity, reduce the risk of hardware failure due to....
【Widely Application】Fit for TO-220 Mosfet Transistors, Power IC, can be applied for cooling voltage regulators LM78XX, LM317, IRFXXX, TDAXX etc..
【Package Included】10Sets TO-220 Aluminum Heatsink & Insulator/Mounting Kits (Heatsink + Screw + Washer + Insulator rubberized silicone).

Pre-applied 3M 8810 thermal conductive double side adhesive tape backing.
Can be applied for passive cooling of 3D printers stepper motor, NEMA 17, TEC1-12706 Thermoelectric Peltier Cooler etc..
Dimension: 1.57 x 1.57 x 0.43 inch / 40x40x20mm (L*W*H).

Can deliver ultra-fast 100+ FPS performance in the world's most popular games, discrete graphics card required.
8 Cores and 16 processing threads, based on AMD "Zen 3" architecture.
4.6 GHz Max Boost, unlocked for overclocking, 36 MB cache, DDR4-3200 support.
AMD AM4 Socket and PCIe 4.0: Ready for AMD Ryzen 5000 Series/ 4000 G-Series/ 3000 Series desktop processors.
Robust Power Design: 12+2 DrMOS power stages, 8+4 pin ProCool sockets, military-grade TUF components, and Digi+ VRM for maximum durability.
Comprehensive cooling: VRM heatsink, PCH heatsink, dual M.2 heatsink, hybrid fan headers and Fan Xpert 4 utility.

Compatible with Intel 500 series & select Intel 400 series chipset based motherboards.
Intel Turbo Boost Max Technology 3.0 Support.
Intel LGA 1200 Socket: Designed to unleash the maximum performance of 11th Gen Intel Core processors.
Comprehensive Cooling: Enhanced VRM heatsink, flexible M.2 heatsink, PCH heatsink, hybrid fan headers and Fan Xpert 2+.
Enhanced power solution: 8 power stages, alloy chokes and durable capacitors for stable power delivery.

Non-Electrical Conductive,Non-corrosive ,Non-toxic,Suitable for all heatsink without fixed clip. It has heat conducting properties, strong adhesion. Helps disperse the heat from Chipset to heatsink effectively..
Use for MOSFET, LED, heat sinks , North-south bridge, video card, Chipset, heat dissipation part, heat dissipation, electrical appliances, instruments and other industries..
It has good thermal conductivity and wide service temperature range(-60~250 degrees Celsius).
Thermal conductivity:003e 1.2W/m-K, Do not use thermal glue "between CPU and HEATSINK"!.
Package Includes : 1 x GENNEL G109 10g thermal glue.