Best Heavy Duty Bevel Gear

AKONA Caspian DX. A deluxe Mesh Duffel Bag with PVC Coated Mesh for all Water Sports Activities

  • Easily carry all your gear in one bag: The spacious Heavy Duty mesh bag is great for most sports equipment including snorkel, dive, swim gear, beach toys and many more..
  • Quickly rinse off your gear: The mesh material allows you to quickly and easily rinse any salt water, sand, dirt or mud off through your bag while your gear is still inside..
  • Perfect Travel Companion. Heavy Duty and packs small, takes up little room in your travel bag. Doesn’t absorb water..
  • The Classic Regulator Bag is made by AKONA, an American Sporting Goods Brand, specializing in Watersports since 1992..
Check Stock

Boston Gear G485Y-G Bevel Gear, 2:1 Ratio, 0.250\ Bore, 24 Pitch, 36 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Brass

  • 36 teeth for use with G485Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

EXAUTOPONE Stainless Steel Bevel Gear Set AR44 Compatible with AR44 Heavy Duty RC Car Bevel Gear Set 30T/8T

  • 32 teeth for use with L149Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

1PC 90-Degree reversing Angle Gear Right Angle Gear Steering Small Bevel Gear Box Bevel Gear Speed Ratio 1:1 (A)

  • 16 teeth for use with PA4416Y-G mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Notch Pro Access Rope Bag

  • Access your gear either as a normal backpack or open it and lay it out like a tarp to get to all of your gear at once.
  • The interior daisy chains and 4 heavy-duty mesh pockets let you organize your small devices for easy access.
  • Constructed of heavy duty 900 denier fabric.
  • The non-slip textured bottom is stiff for comfort while backpacking and the top hood prevents woodchips and rain from intruding into your stuff.
  • Size: 27” x 15”, Capacity: 60 Liters, Weight: 6.25 lbs..
Check Stock

Woodskil 8 Inch Drill Press, 2.3 Amp Variable Speed Bench Drill Press, 5-Speed Bench Top Drilling Machine

  • 8-INCH DRILL PRESS: CSA listed, 120VAC, 2.3 Amp induction motor, 1/2-inch keyed chuck, 8-inch swing, 2-inch spindle stroke.
  • HEAVY DUTY MATERIAL: Unlikes other drill press uses iron work table and base, the work table and base of this Woodskil 8-inch bench dress press are all made of CAST IRON, ensuring steady and accurate drilling experience.
  • BEVERLY WORK TABLE: The heavy-duty cast iron work table can bevel 45 degrees left and right, and the work table is free to adjust the height.
  • MECHANICAL 5-SPEED: Powerful motors provide a high speed, 750, 1100, 1500, 2100, 3200 RPM for different material drilling.
  • PRODUCT WARRANTY: We provide 2 year limited warranty for this 8 inch drill press, if you have any questions about it, please feel free to contact us.
Check Stock

Boston Gear L153Y-G Bevel Gear, 1.5:1 Ratio, 0.750\ Bore, 10 Pitch, 30 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • 30 teeth for use with L153Y-P mating bevel gear in 1.5:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

WINCENT Military Backpack, Large 3 Day Tactical Backpack for Men Work Camping Army Molle Assault Pack Utility Bug Out Bag 45L Black

  • Durable military-style backpack features heavy-duty fabric that protects your gear and withstands outdoor conditions.
  • Take your water bottles, walkie-talkie, first-aid kit, torch, and sundries on your next expedition, each with its own pouch.
  • Attach gear, tools, and accessories to the laser-cut Molle system on the front and sides, perfect for taking your gear into the field.
  • Withstands all conditions with 600D heavy-duty, water-resisting oxford and nylon fabric that protects gear from damage.
  • With a capacity of 45 liters, the backpack fills many roles, perfect for emergencies, outdoor hiking, or daily use.
Check Stock

Odyssey Fzgsdjc1 Flight Zone Controller Series Large DJ Glide Style Case

  • Exclusive patent pending bevel foam interior and gliding laptop platform.
  • Heavy-duty ball corners and bottom rubber feet.
  • Removable v-cut front access panel with universal do-it-yourself interior adjustment Foam.
Check Stock

Boston Gear L147Y-P Bevel Pinion Gear, 2:1 Ratio, 0.188\ Bore, 20 Pitch, 10 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • 10 teeth for use with L147Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock