Best Heavy Duty Manual Transmission Oil

ATPEAM Oil Changer Vacuum Fluid Extractor | Manual Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover 7L

  • 7L Oil Extractor: The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can....
  • Four Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the....
  • Fluid temperature range: 35°F- 200°F/1°- 95°C.
  • Easy To Use: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan.....
  • Wide Application: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of....
Check Stock

ATPEAM Oil Changer Vacuum Fluid Extractor | Manual Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover 9L

  • 9L Oil Extractor: The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can....
  • Four Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the....
  • Fluid temperature range: 35°F- 200°F/1°- 95°C.
  • Easy To Use: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan.....
  • Wide Application: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of....
Check Stock

Industrial Leather Sewing Machine Heavy Duty Sewing Machines Thick Material Leather Sewing Tool Automatic Fabrics Sewing Machine Leather Patcher Sewing Machine for Sewing Jeans Tents Leather Products

  • ...ame and extra-high sewing speed, this sewing machine can sew through a variety of heavy weight fabrics and provides long lasting stability..
  • 【Basic Information】Thick material lockstitch sewing machine. Maximum speed: 3000S.P.M. Needle type: DP*5 No. 17. Maximum stitch distance: 7mm(0.27 in). Presser foot stroke: manual 6mm(0.24 in), knee control 13mm (0.5 in). Use of the rotary hook: 2 times the thread volume of the rotary hook. Lubrication method: oil pump automatic lubrication..
  • 【Work Efficiently】The automatic lubrication device and the silicone oil thread device are used, so that the sewing performance is extremely stable. At the same time, the use of a double-threaded large rotary hook greatly improves the sewing efficiency. It remains reliability and durability at the high speed..
  • 【Purchase Instructions】Exclude motor, exclude tabletop rack, the product is only the sewing machine head, and the customer needs to purchase a motor with a power of more than 400w and the tabletop rack to install and use. In terms of installation combination, it is recommended that personnel with professional knowledge carry out the installation..
Check Stock

Prokomon Dual Clutch Dry DPS6 Transmission Installer Remover Removal Tools Kit Compatible for Ford Volvo Focus Replacement FM Number: 307675

  • ◇ Material --- The material of the installation and removal tool of the dual clutch dry transmission is heavy duty steel, which is corrosion resistant and hard, so it has a long service life.
  • ◇ Fits --- Compatible for VOLVO, Compatible for FORD, Transmission DPS6, Replacement FM No. 307675. although not the original, it is a direct replacement and fits perfectly, we offer a warranty.
  • ◇ As Accurate As OEM --- All tools are engine tested and rigorously quality checked to ensure compatibility with the engine.even some our designs are better and last longer than those of the original manufacturers.
  • ◇ Function --- Special tool for mounting and dismounting, for removing dry transmissions and aligning dual clutches for oil seal replacement.
  • ◇ Instruction --- Install the special tool and compress the input shaft. After the threaded rod is in contact with the input shaft, turn it 20 turns..
Check Stock

Juki Industrial Lockstitch DDL Series Servo Motor, Table, LED Lamp.Assembly Required. DIY (DDL-5550 Made in Japan)

  • ✅SINGLE NEEDLE LOCKSTITCH AUTO-LUBRICATION OF HOOK HORIZONTAL AXIS HOOK AND BOBBIN ADJUSTABLE REVERSE FEED.
  • ✅It comes complete with sewing machine table and Electronic DC Servo Motor 1/2 H.P, 1 PHASE, 110 VOLT, 0 ~3300 RPM (Model DMS-550), everything (drawer, belt, tools,lamp and instruction manual) brand new,Thread Stand *Bobbin Winder *Oil Pan/Knee Lifter *Extra Bobbins *Extra Needles *Instruction Manual *Screw Driver* Machine Oil *Table top (size 48" x 20") *Heavy Duty Legs, *Table Top,*servo motor *V Belt Hardware.✅.ASSEMBLY REQUIRED.
Check Stock

Nova Tractor 78" Heavy Duty Ditch Bank Flail Mower, for Tractor 50 to 80 HP, 3pt Cat II

  • Italian brand Comer heavy duty transmission.
  • heavy duty rear roller which is 7.6" diameter.
  • ideal for tractor from 50 to 80hp, Cat II.
Check Stock

Wrench Rabbit New Complete Engine Rebuild Kits for Yamaha R Raptor (05-13), YFM 350 X Warrior (87-04) WR101-209 , Black

  • Vertex Piston Kit standard compression piston, rings, pin and clips. Hot Rods Heavy Duty crank stock stroke - includes wrist pin bearing for two strokes. Hot Rods main bearing/seal kit Hot Rods transmission bearing kit includes transmission bearings, output shaft collar and sprocket lock washer. Hot Rods counter balancer bearing. Kit Hot Rods water pump bearing and seal kit. Vertex complete gaskets kit including seals and O-ring kit (covers top and bottom). Hot Cams cam chain..
  • Fit: Convenient one stop shop in a box! Kit contains oversized +0.5mm piston kit, heavy duty crankshaft, main bearing and seal kit, balancer bearing kit, transmission bearing kit, waterpump bearing and seal kit, complete gasket and seal set, and cam chain (if applicable).
  • Meets or Exceeds OEM Specs for Fit and Performance.
Check Stock

Westinghouse WGen7500 Portable Generator with Remote Electric Start - 7500 Rated Watts & 9500 Peak Watts & Reliance Controls PC3020 PC3020K Generator Power Cord, Black

  • Product 1: Features Two GFCI (Ground Fault Circuit Interrupter) 5-20R 120V Household Duplex Receptacle and One L14-30R 120/240V Twist-Lock Receptacle.
  • All Outlets Have Rubber Covers for Added Safety.
  • Product 1: Plug-and-Play: Comes with a Remote Start Key Fob, 12V Battery Charger, Oil, an Oil Funnel, a Tool Kit, and a User's Manual to Get You Started Right Out of the Box (Minimal Assembly Required).
  • Product 1: Powered by a 420cc Westinghouse 4-Stroke OHV Engine Featuring a Long-Lasting Cast Iron Sleeve with Automatic Low Oil Shutdown and Digital Hour Meter. Noise Level-72 dBA.
  • Product 1: All Westinghouse Portable Generators are Functionally Tested in the Factory and May Contain Minimum Residual Oil and or Fuel Odor.
  • Backed by 3-Year Limited Service, Labor, and Parts Coverage with Nationwide Customer Service Network.
  • Product 2: Perfect for connecting a generator and a transfer switch with a single cord.
  • Product 2: Designed for use with reliance Manual transfer switches, transfer panels and power inlet boxes.
Check Stock

NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER AND POLYURETHANE MOUNT FOR 1955-1957 CHEVY WITH POWERGLIDE, TURBO TH 350, TH 400, 700R4, MUNCIE, SAGINAW, 3 & 4 SPEED, TRIM-TO-FIT TRANSMISSION MOUNT WITH HARDWARE, TRI-5, BEL AIR, 150, 210, NOMAD, SEDAN DELIVERY, DELRAY

  • Brand New Southwest Speed Bolt-in Tubular Transmission Crossmember & Polyurethane Transmission Mount For 1955-1957 Chevy's (SWS Part # 400-7084 And # 400-7031). | * This Southwest Speed Bolt-in Tubular Transmission Crossmember Is For Installing A Powerglide, TH350, TH400, Or 700R4 Automatic Transmission In A 1955, 1956, Or 1957 Chevrolet 150, 210 Including Delray, Bel Air, Sedan Delivery, & Nomad. Unfortunately, It Won't Work With Any Of The Convertible Frames That Have The X-Braced Frame, That Encases The Drive Shaft..
  • This Crossmember Will Also Work With GM Manual Transmissions, Including Later Model Muncie & Saginaw 3 & 4 Speed Manual Transmissions, And Allows The Use Of Bellhousings That Don't Have The Rear Engine Mounts On The Bottom Of The Bellhousing. This Is Extremely Helpful When You Are Trying To Install Newer Model Engine And Transmission Combinations In The 55-57 Chevy. This Crossmember Moves The Rear Engine/transmission Mounting Location From The Bottom Of The Bellhousing To The Tail Housing On The Transmission. | * This Transmission Crossmember Kit Includes The Polyurethane Transmission Mount, Which Offers Added Strength Without The Harshness Of A Solid Mount, Making It A Smart Upgrade Over Traditional Rubber Mounts. | * This Crossmember....
Check Stock

Nova Tractor 68" Middle Duty Ditch Bank Flail Mower BCRM175, for Tractor 30 to 40 HP, 3pt Cat I

  • Italian brand Comer heavy duty transmission.
  • heavy duty rear roller which is 5.3" diameter.
  • ideal for tractor from 45 to 60hp, Cat I.
Check Stock