mistcooling 24\ OSC Misting Fan Kit - High Pressure - (3 Fan)
24 Inch Fans 1500 PSI Misting Pump Six Nozzle Stainless Steel Misting Fan Ring 25 Ft High Pressure Flexible Tubing Stainless Steel Misting Nozzles Stainless Steel ¼ Inch Clamps Easy to Install DIY Install.
Misting Pump Features : Maximum Pump Speed (0.15/ 0.30 gpm.): 1800 RPM Maximum Inlet Pressure: 100 PSI Minimum Inlet Pressure: (Based on setting on Pressure switch) or Flooded if Pressure switch is bypassed Maximum Outlet Pressure: 1500PSI Maximum Flow: 0.15 GPM, 0.30 GPM (Refer to manufacturing label on pump) Full load Amps. (0.15/ 0.30 gpm.): 1.38 Amps. /2.15 Amps Voltage: 110V/ 220V AC (Refer manufacturing label on the pump) Noise Level: 75 DB. Maximum Fluid Temperature: For Room Tem.
Outdoor Fan Features : "Size: 24” Color: White RPM: 1110, AMPS: 2.65, CFM:9100 3 speed Pull chain Stainless Steel hardware with Durable Corrosion resistant finish Motor with thermal Overlade protection industrial Grade aluminum blade 10 Ft Heavy Duty cord with cord wrap Quiet operation For indoor/ Outdoor Use Osha Approved Grill ".
Stainless Steel Ring Features Made with Industrial Grade 3/8'' Rigid Stainless Steel 316 Compatible with all High and Mid Pressure Mist Pumps Pre-threaded nozzle slots for 10/24 Thread Rated for up to 2000PSI Attaches to any wall mount, ....
8MILELAKE 21pcs Oxygen Sensor Socket Set Sensor Oil Pressure Sending Unit Socket Set
Ideal for the removal and installation of oxygen sensors, oil pressure sending units, oil pressure switches, vacuum switches equipped and thermal sensor switches.
Slotted design allows removing oxygen sensor with wiring harness attached and prevents damage to wires.
Heavy duty Forged sockets constructed from Chrome Vanadium alloy steel with black finish for lasting lifetime.
The perfect tool kit for the professional mechanic or DIY enthusiast..
All the tools are well organized in a blow molded case for easy transportation, simple storage, and quick identification..
Ultra-slim and travel-friendly: This slim switch case is designed to fit your Nintendo Switch perfectly. Super thin and lightweight. An adjustable and removable hand strap allows comfortable holding or carrying. Note: This case is not compatible with Nintendo Switch OLED Model.
10 Game-card slots: 10 elastic game-card slots allow you easily switch and storage your favorite physical game cartridges.
Raised design: The EVA hard shell has a raised design to prevent pressure from being applied directly to the joysticks and buttons. So your console won’t be mis-activated(The exterior design of our switch case is protected by appearance patents globally).
Military level protection: Our Nintendo Switch sleeve has passed the Military-Standard-Drop-Test, which keeps your Switch console safe from knocks, bumps, and drops.
the soft interior panel protects the screen from scratches.
Products guarantee: You can get a sturdy and splash-proof tomtoc switch carrying case with 12 months worry-free warranty, which owns a heavy-duty and durable world-leading YKK zipper (Nintendo Switch and other accessories not included).
9500 Running Watts and 12500 Peak Watts (Gasoline).
8500 Running Watts, 11200 Peak Watts (Propane).
Remote Start With Included Key Fob, Electric and....
Features Two GFCI 120V 5–20R Standard Household Receptacle, One Transfer Switch Ready 120V L14-30R, and One RV Ready 120/240V 14–50R.
Powered by a Heavy Duty 457cc Westinghouse 4-Stroke OHV Engine Featuring a Long-Lasting Cast Iron Sleeve With Automatic Low Oil Shutdown and Digital....
Plug-and-Play: Comes With a Remote Start Key Fob, 12V Battery Charger, Oil, an Oil Funnel, a Tool Kit, and a User’s Manual to Get You Started Right....
All Westinghouse Portable Generators are Functionally Tested in the Factory and May Contain Minimum Residual Oil and/or Fuel Odor.
Haitengwen Tactical Flashlight Keymod Light with Integrated Rail Mount
Rail Mounted Tactical Flashlight Keymod - Integrated flashlight and mount, middle tube & rail clamp as one module seamless (no glue).
prevent crack and fast install to keymod rails.
Versatitle assemble ways - middle rail mount tube has exact same threads on 2 sides, support reverse installation.
slight offset keymod mount flashlight more flexibility to mounted on key mod rail systems.
Compatible for key-mod rails - flashlight with mount unremovable, directly mounted to keymod rails, enhanced key-mod rails screws of heavy duty steel.
Bright 500 Lumen Tactical flashlight one mode - black flashlight adopts high efficient LED, on/off single mode, airgrade aluminum 6061-T6 body of matte black finish, light up 137-182 yards and constant 4.5 hrs runtime.
...alls vacuum switch with a 7/8’’ hex and some oxygen sensors.
3/8’’ Drive × 7/8’’ × 3-1/8‘’ oxygen sensor socket removes and installs oxygen sensors in domestic and many import vehicles. Slot in socket for wire clearance..
1/2’’ Drive ×1-3/16’’ ×3-1/2’’ vacuum switch socket removes oil pressure sending units on late 80’s to mid 90’s GM models.
1/2’’ Drive ×1-1/16’’ × 3-1/4’’ thermal sensor switch socket removes and installs thermal sensor switch on 1973-1977 CM vehicles.
3/8’’ Drive ×1’’ and 1-1/16’’ ×3’’ remove oil pressure sending units. Deep design fits switches up to 2-5/8’’..
1/2’’ drive ×7/8’’ ×2’’ heated oxygen sensor sockets slot in socket accommodates connectors on heated oxygen sensors.
3/8’’ Drive × 7/8’’ ×1-1/4’’ low profile design for use in tight spaces..
This set includes 1-1/16 and 1 in. oil Pressure sending unit socket, 3/8 in. drive, 1-3/16 in. Oil pressure sending unit socket, 1/2 in. drive, 1-1/16 in. thermal sensor switch socket, 1/2 in. drive. 7/8 in. heated oxygen sensor socket, 1/2 in. drive, 7/8 in. low profile offset oxygen sensor socket, 3/8 in. drive, 7/8 in. oxygen sensor socket, 3/8 in. drive, 7/8 in. universal vacuum PVS, TVS....
Qiilu Transmission Oil Pressure Switch 28600-RCL-004 Car Auto Trans Oil Pressure Switch Replacement Fit for Honda Accord for CR-V
Scope of Application --- The gearbox oil pressure switch Fits for ACURA RSX 2002-2006, Fits for ACURA TSX 2004-2008, Fits for HONDA ACCORD 2003-2007,....
Reference OEM --- This gearbox oil pressure switch replaces the OEM number for reference: 28600-RCL-004. Comply with strict quality control standards.
High-quality Materials --- The gearbox hydraulic switch is designed and made of high-quality aluminum and ABS, which is stable and durable, and is a....
Easy to Install --- The gearbox oil pressure switch is professionally designed, simple to install, and does not require complicated tools. Can replace....
Quality Assurance --- As a professional seller, we provide high quality products and considerate services. Every product must go through strict....
Ingersoll Rand SS5 5HP 60 Gallon Single Stage Air Compressor (230V, Single Phase)
Long-Life: Durable cast iron construction, long-lasting extended pump life designed for over 5,000 hours of trouble-free use.
Maximum Power and Flexibilty: 100% continuous duty, high pressure operation up to 135 psig and a 60 gallon vertical ASME receiver tank provide plenty of punch for the most demanding applications.
Easy Operation: Automatic start/stop pressure switch control, fully assembled and pre-wired delivery, easy to change filter, oil sight gauge and easy to fill oil port simplify operation and maintenance.
Advanced Safety Features: Manual thermal overload protection of the motor and a totally enclosed belt guard provide constant protection.
Reliable Operation: All Season Select synthetic lubricant increases efficiency.
with 2,000 hours of service between changeouts, it performs four times longer than petroleum-based lubricants.
SUPER HEAVY DUTY HIGH FLOW AIR FILTRATION SYSTEM, 2 STAGE PARTICULATE FILTER PLUS OIL REMOVING COALESCING FILTER COMBINATION (1" NPT, AUTO DRAIN)
1" NPT, HEAVY DUTY INDUSTRIAL GRADE AIR FILTRATION AND IN-LINE AIR DRYER COMBINATION WITH PRESSURE REGULATOR. WITH INTERNAL FLOAT DRAIN (AUTO DRAIN) STAGE 1..
175 PSI MAX INPUT PRESSURE, EQUIPPED WITH 11oz METAL BOWLS, VISIBLE SIGHT GLASSES, PRESSURE GAUGE, WALL MOUNTING BRACKET AND 4 BAGS OF DESICCANT BEADS.
STAGE 1: PARTICULATE FILTER/WATER TRAP WITH PRESSURE REGULATOR. 5 MICRON ELEMENT REMOVES 95% OF MOISTURE AND DEBRIS, REGULATOR WILL ADJUST PRESSURE FROM 7 TO 175 PSI.
STAGE 2: COALESCING / OIL REMOVING FILTER, EQUIPPED WITH 0.01 MICRON ELEMENT WILL REMOVE 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST STAGE 1..
STAGE 3: IN-LINE DESICCANT AIR DRYER WILL DRY OUT THE OUTGOING COMPRESSED AIR LINES BEFORE REACHING YOUR PNEUMATIC TOOLS, BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE..
