Siemens 3UG4616-1CR20 Monitoring Relay, Three Phase Voltage, Insulation Monitoring, 22.5mm Width, Screw Terminal, 1 CO For Vmin and Vmax Contacts, 0-20s For Vmin and Vmax Delay Time, 160-690 (90-400 w.r.t. N) Line Supply Voltage
This monitoring relay can monitor own working voltage..
8 kinds of rated voltages are adjustable, can apply to voltages in all regions of the world.
The working status of the relay is indicated by the LED indicator.
Ultra-small size and it is easy to install..
It is applied to mobile device connection control, causing accidents in equipment protection against reverse operation, normal/emergency power switch, preventing phase failure of power load..
5 Pack 40/30 AMP 12V DC Waterproof Relay and Harness - Heavy Duty 12 AWG Tinned Copper Wires, 5-PIN SPDT Automotive Relay
Never go beyond its capabilities. Try to stay 10 to 15% below what the rate is for.
12-volt 4-prong relay. Excellent water-repellent and dustproof ability, but not using it in water.
For the people whose relays are burning, please make sure you are making tight connections (especially on the load wires), read the specs on the item description, and ensure that the operating environment meets the safety requirements of the relay.
Be careful when inserting the relay into the socket. If you force it, you will bend the female connectors.
Thick 12 gauge wire for the load terminals. Easy to install just make sure you follow the wiring diagram. Works for both positive and negative activation.
Wiring Harness,Eyourlife LED Light Bar Wiring Harness Kit 180W 12V 40A Fuse Relay On/Off Switch Relay 14AWG 12FT Length Heavy Duty Universal Fitment(2 Lead)
Eyourlife Switch Relay: Eyourlife IP56 waterproof power relay and blade fuse proctect circuit safety from overcurrent or short-circuit.Regulate the power to be consistent and prevent any surge..
2 Available Leads:One wiring harmess with two light output connectors gives you brilliant solution to install dual Led lights..
CNAODUN PID Temperature Controller Kit 100-240 VAC Voltage with 40DA Solid State Relay，K Type Thermocouple Probe and Heat Sink
♥【One Way SSR output】3,4 port output to SSR,a 40da solid state relay is included in the package.The power supply voltage for this Pid temperature controller is 100-240VAC..
♥【One Alarm Output】6,7 ports are alarm outputs, AC220V/DC30V 3A (Resistive load) ON/NC, also can be used to connect relay..
♥【Supports 2 Wire Sensor Input】Support two-wire thermocouple input, K, E, J, N, W3-25, W5-26 type thermocouple input are available, the default setting is K type thermocouple input.
♥【℉ and ℃ Adjustable】Fahrenheit and Celsius adjustable, default is Fahrenheit, with PID function.
♥【Temperature Digital Display】PV is the current measured temperature, SV is the set temperature, both are displayed simultaneously..
Weewooday 15 Pieces 5V Relay Module 1- Channel Relay Control Boards with Optocoupler Isolation High and Low Level Trigger Expansion Board
Relay module: this relay board supports high and low level trigger and can be controlled by any 5V digital output of the microcontroller.
Parameter details: maximum load of normally open interface: AC 250v/ 10A, DC 30v/ 10A, trigger current is 5mA.
The 5v relay control board adopts SMD optocoupler isolation, which has strong driving ability and stable performance.
Practical design: with fault-tolerant design, the relay module will not operate even if the control line is disconnected.
All interfaces can be provided through directly connected terminal s since the humanized interface design, it is very convenient to use.
High compatibility: the relay module can be directly controlled by the 5V logic signal provided by the microcontroller, suitable for 8051, Raspberry Pi, PIC, DSP, ARM, AVR, MSP430, TTL logic, etc..
Wide application: this 5V relay board can be applied with Raspberry/ CNC machine/ ARM/ PIC/ AVR/ MCU/ PS4 and more.
Hardwire or plug directly into the optional 20A GFCI receptacle.
View AC & battery current, % status bar for inverter output on the onboard display.
Extended Surge Rating: Surges to 2X continuous power for 2 seconds for motor loads.
True Sine Wave AC Power: For operation of sensitive and motor loads.
Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off.
Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis.
Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator)..
Dayton 1UHH4 Line Voltage Control, Heat, Cool, Analog
Price For: Each Cooling Full Load @ 120V: 13.8A Voltage Range: 110 to 125VAC Enclosure Type: Steel Color: Black Switch Action: Close On Rise Includes: 6 ft. Cord Standards: ETL C/US Switch Type: SPST Number of Switches: 1 Sensor Type: Bi-Metal Height: 5-1/2" Features: HSJ Cord with Piggyback Plug, Mount with Suspension Chain or Wire.
Control Range: -10 Degrees to 100 Degrees F Differential: 6 to 8 Degrees F Full Load Amps: 13.8A Number of Relay Inputs: 1 Number of Relay Outputs: 1 Input Voltage: 120VAC Locked Rotor Amps @ 120V: 58.8A Application: Cooling Only Inductive Amps @ 120V: 13.8A Cooling Locked Rotor @ 120V: 58.8A Contact Rating Resistive @ 120V: 13.8A Mounting Type: Suspension Chain or Wire Item: Line Volt Mechanical Tstat.
Full Load Amps @ 120V: 15A Depth: 2" Width: 2-1/2" Number of Stages: 1 Country of Origin (subject to change): China.
Upgraded TJ690380 90-380 Fan Relay by PartsBroz - Compatible White Rodgers - Replaces AP4485598 620537 90380 92380 - Compact, Totally Enclosed Design - Coil Voltage 24 VAC
90-380 Heavy Duty Switching Fan Relay - A high-quality exact equivalent for part numbers TJ690380, AP4485598, 620537, 90380, 92380, D90-380. This item operates in any position..
Compatibility with major brands - Heavy Duty Universal Relay is compatible with White Rodgers appliances. Our relays fit hundreds of models and can be installed in a few minutes..
Quick DIY repair - TJ690380 90-380 Fan Relay Replacement will help if your previous part is worn out. Element by PartsBroz is with isolated coil. Wear work gloves to protect your hands..
Attentive support - If you are uncertain about whether the relay fits your HVAC unit, we will help you. We generally put forth a valiant effort to guarantee you are totally happy with your purchase..
High-quality elements - Heavy-Duty Enclosed Fan Relay meets or exceeds all manufacturer specifications. We provide a lifetime warranty and guarantee 100% money back..
