100% 304 Stainless Snow Blower Impeller Modification Kit, 3/8inch 3-Blade Universal – Modifies 2-Stage Machine Including Installation Hardware, Repeated and Use Durable in Various Conditions (3)
...nevitably rust with the nut and become welded together. This makes it impossible to repeat use after unscrewing. Our screws are made of 304 stainless steel, which means it can stand years of harsh environment while being rust-resistant. Because of this, you can expect to use it again and again..
Rubber Paddle 3/8″ thick(2″W x 5″L), Made from Styrene Butadiene rubber (SBR rubber) ,SBR rubber with minimum tensile strength of 725 PSI (5 MPA),Hard rubber with a durometer of 65-75.
Metal Strap with holes – 1 3/8″ W x 3 3/4″L ,Punched flat bar stainless steel materials, 1/16″ thick.
Bolts (5/16-18 x 1 in. coarse thread) w/ 5/16-18 lock nuts (use 1/2″ wrench & socket).
Hex Bolts,Hex lock nuts nylon inser,self-tapping screw (#14 x 1),Sheet metal screw, Hex washer head self drilling, Stainless Steel Materials.
The Purpose of the Kit : This kit reduces the existing “gap” between the snow blower’s impeller blades and the impeller chamber wall. The smaller the gap, the greater your machine’s operational efficiency and snow throwing capability will be, and the less likely that your machine will clog up with snow..
Purchase Notes:Pleases make sure the part number of new replacement matches your original equipment before ordering. If you encou....
Impact Grade Socket Wrench Adapter Extension Set Turns Power Drill Into High Speed Nut Driver,1/4-Inch Hex Shank to Drive for Adapters to Use with Drill Chucks,Sizes 1/4' 3/8' 1/2',Cr-V,Black,3-Piece
☞ PACKAGE CONTAINS:3Pcs - 1/4" drive adapter, 3/8" drive adapter, and 1/2" drive adapter and each with a 1/4 inch hex shank driver socket wrench adapter set .1/4" 3/8" 1/2" Turns any power drill into a power nut driver Sturdy spring-loaded ball bearing holds sockets securely in place Sockets Snap-On Tightly and Won't Slip Off.
☞USES: Attach these Versatile Extender Bars to any Powered/Cordless Drill Chuck or Impact Driver to turn it into a High-Speed Nut Driver – Useful for Automotive Mechanic Vehicle Repairs, Technicians, Handyman & Hobbyist Developments to use with sockets on Hardware/Tire Nuts, Lag Bolts, Hex Head Cap Screws at Home, Workshop Factory or Construction Site.
☞Multifunction: 3Pcs1/4 3/8 1/2" Square Nut Hex Shank Driver Drill Bit Used in the installation of pneumatic screwdriver, electric screwdriver, pneumatic drill, manual screwdriver and other installation for the hexagonal tool .It is a good accessory for conversion. for Universal Socket,Impact Adapter and Reducer Set,Universal Joint Set,Socket Adapter and Drive Reducer Set,Drive Impact Socket Extension Bar Set,Drive Impact Socket Set.
☞Durability: Quality is a guarantee with this 3 piece sturdy and durable solid steel set designed to withstand torque compression under most ....
12 Pack 8/32 Inch M4 Threaded Rod with Hex Nuts 12 Pcs M4 Stainless Steel Threads Studs Rods 12 Pcs M4 Stainless Steel Fully Threaded Hex Nuts for Beaded Garden Stake Rods (12 Inch)
Ample Quantity: the package comes with 12 pieces of 8/32 inch M4 12 inch threaded rods and 12 pieces of M4 hex nuts, a total of 24 pieces, a nice set is ideal for making a dozen (fairy garden stakes)fairy garden stakes or the other projects.
Dimension: the threaded rod is about M4 in thread diameter, 300 mm/ 12 inch in total length.
The hex nut is about M4 in coarse thread diameter, 0.7 mm/ 0.03 inches in pitch, 0.28 inch/ 7 mm in width across flat, and 0.11 inch/ 2.8 mm in height.
Threaded Rods Studs: the 8/32 threaded rod is made of 304 stainless steel, safe, sturdy, with corrosion resistance and antirust ability, and can offer you a long time service.
It can be applied for assembly fastening, just screw it into threaded nuts or tapped holes.
Hex Nut: the hex nut is an ideal replacement for industrial and construction fasteners and an essential accessory in your daily life, simply screwing it onto a bolt, cap screw or threaded rod of the same thread size, quick and easy.
Widely Applicable: these fairy stake rods can be widely applied to bolts, clamps, hangers and U bolts and many....
Kuryakyn 7502 Motorcycle Foot Controls: Adjustable Mustache Bar for 2004-19 Harley-Davidson, Yamaha Motorcycles, Chrome
...r Clamp—Bar, (1) Mustache Bar, (1) Left Footpeg Clevis, (1) Right Footpeg Clevis, (1) Hardware Kit containing: (2) 7/16”-14 X 1.5” hex head screw, (2) 7/16”-14 X 1” hex head screw, (4) 5/16”-18 X 3/4” socket head cap screw, (2) 7/16”-14 acorn nut, (4) .875” X .47” ID X .063” washer, (2) 3/8” thick wave washer, (2) 3/8” thin wave washer, (2) 3/8”-16 X 1” socket head cap screw, (2) 5/16”-18 X 1” socket head cap screw.
suggested tools for smooth installation:Set of combination wrenches, socket set and ratchet, set of hex wrenches.
This Kuryakyn part is most compatible with Harley: ’86-’17 Softail & Rocker Models, Yamaha: 99-'14 Road Star Models, '08-'17 Raider Models & '98-'16 V Star 650 Models.
Flexible Drill Bit Extension Set, Includes 105° Right Angle Drill, Bendable Drill Bit Extension, 3pcs 1/4 3/8 1/2\ Universal Socket Adapter Set, 3pcs Drill Bit Holder, Screwdriver Bit Kit
【Complete Collocation】Package included 1pcs bendable drill bit extension, 1pcs 105° right angle drill extension, 3pcs 1/4 3/8 1/2" universal socket adapter set, 3pcs Drill Bit Holders, 10pcs screwdriver bit set. These extension kit work great, when you have limited access..
【1/4" 105° Right Angle Drill Attachment】105° Angle 1/4 inch Hex Drill Bit Screwdriver Socket Holder Adaptor,which is quick change compatible and fits most power drill, rechargeable drill, manual wrench and driver chucks..
【Impact Driver Bit Set】1/4 Hex Shank Socket Adapter Impact Set Square Nut Driver Drill Bit 1/4" 3/8" 1/2" ,connect to the standard hex nut drivers, impact hole saws, spade bits and more..
【Drill Bit Holders】1/4 Inch Hex Shank Magnetic Extension Chuck Adapter Quick Release Bar Socket Screwdriver Bit Holder | 60mm/ 100mm/ 150mm Length,Suitable for electric, pneumatic screwdrivers and other screwdriver bits of power tools, drill extended..
【Flexible Shaft Drill Bit Extension】Length: 29cm/11.42" (Approx.).
Features: for Electronic Drill, Connecting Link, Flexible..
Material: 304 stainless steel (A2-70) and no exterior finish, greater strength and corrision resistance performance than regular stianless steel or zinc plated fasteners..
Feel free to contact us if you have no idea about what size to choose..
Alternative to a hex nut and an anti-vibration washer. Ideal use for applications under vibration. You could also find the matched screws with different head types in our shop..
OMT 16pc Locking Lug Nut Master Key Set | SAE & Metric Wheel Lock Removal Kit for Removing Locking Spline Star Hex and Fluted Hex Lug Nuts | Lug Nut Remover Set for Mechanics and More, CrMo Steel
16-PIECE SET: This Orion Motor Tech wheel lock removal kit includes 16 multi-point keys and lugs in the most commonly needed SAE and metric sizes—5/8", 41/64", 45/64", 7/16", 11/16", 13/16", 3/4", 9/16", 1/2", 12 mm, and 15 mm—to remove spline, star, hex, and fluted hex locking lugs nuts with maximum protection and minimal effort.
SCRATCH-FREE OPERATION: Our lug nut removal tool set comes with a multi-point thin-walled design to deliver powerful torque to 16 lug nut fittings without damaging your rims.
the extra-long keys also help avoid any dents and scratches during use.
WIDE APPLICATION: The double-hex heads provide allow this locking lug nut removal tool kit to work with either 13/16 or 7/8 inch lug wrenches.
BUILT TO LAST: These lug lock removers are constructed from high-quality chromoly steel, all twice quenched and then blackened to offer you maximum strength and corrosion resistance.
EASY ORGANIZATION: Each locking wheel nut key is laser-etched with its specific size for easy identification during use, while the blow-molded ....
