Creality 3D Printer Upgrade Kit with Capricorn Premium XS Bowden Tubing Metal Feeder Extruder Frame,Fittings and Motor Stepper Dampers for Ender 3/3 Pro/Ender 3 V2/Ender 3 Max/Ender 5 Pro/CR-10S
Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more....
Aluminum Drive Feed for Creality 3D CR-7, CR-8, CR-10, CR-10 S4, CR-10 S5,Ender 3, it is stable and durable..
Small and large pneumatic couplers to secure PTFE in extruder and hotend..
Nema17 Stepper Dampers are used to decrease noise and resonance in your CNC and 3d Printer.
Customer Service - If you have any problem or question for our product,please feel free to contact us. We will offer professional technical support to....
3Dman Filament Spool Holder Bracket for Material TPU/PLA/ABS/Nylon/Wood 0.5KG 1KG for 3D Printer
【Material】The 3D printer filament holder is made of high quality metal and plastic, sturdy and durable, long service life. Fine workmanship, small size, easy to carry and store..
【Easy Installation】1 x 3D printer filament holder, 2 x M4 T-nuts, 2 x M4x6mm screws. Filament installation is easy and fast, using 2 M4 screws to fix, stable and not loose..
【Convenient and durable】60° tilt angle for smoother feeding. Stand reinforced design, hard strength, durable..
【Widely used】Suitable for 0.5kg or 1kg and below TPU/PLA/ABS/Nylon/Wood 1.75mm 3.0mm 3D printer consumables..
【Application Scope】 Suit for 2020, 2040 aluminum frame type 3D printer, Ender 3 series, CR-10 series..
CR10 S5 Silicone Heater Pad 508 x 508mm 20 X 20 Heated bed w/ 24 Holes For Creality CR-10 S5 3D Printer Large Print Bed Adhesive Backing + Sensor 120V
This silicone heating pad with 24 pre-made screw holes with dia 12mm as the picture shows is designed for creality CR-10 S5 3D printer building....
Our Manufactuer use Arlon silicone rubber substrate imported from the United States and 3M Adhesive Backing, highest quality. Each heated bed is....
CR10 S5 3D printer high temperateure heated bed.
Size: 508mmx508mm With 2 meters NTC 100K 3950 thermistor for temperature Control. Power consumption: 1300W Attached with two pieces 2meters length....
Caution! Before buying, please check if the 24 hole pattern conforms to that of your build plate. Pattern view from the adhesive side of this heater....
HICTOP 3D Printer Belt GT2 Belt 2mm Pitch 6mm Wide for Creality Ender 3 3 Pro Ender 5 CR-10 10S Anet A8 CNC and Other 3D Printers (5 Meter (16.5ft))
The HICTOP 3D printer belt is compatible for Creality Ender 3 ender 3 Pro Ender 5 CR-10 10S Anet A8 etc.3D Printers. There is no metal heads on it, you can use zip cable ties to lock it onto the printers.
3D Printing Build Surface, 3D Printer Heat Bed Platform Sticker Sheet, 12' x 12' Square with Premium Adhesive for CR-10 / CR-10S,Hictop CR-10, Hictop Hero d3 3D Printers 310x310MM (Pack of 4)
【PACK of 4】Our 3D Printer build surface Platform Sticker Sheet are 12″ x 12″ (310mm x 310mm) square, fully matches heated bed on many popular 3D printers. Fits: Creality CR-10S/CR-10, Hictop CR-10, Hictop Hero d3, JG Aurora A5 and A5x, Artillery Sidewinder X1/X2, Folger Tech FT-5, Creative3D Elf CoreXY, SainSmart Coreception CoreXY, BIQU Thunder, ADIMLab Gantry, Wanhao D9 (300), Tenlog TL-D3 PRO, Sunlu S8, JGMaker Artist-D Dual Extruder, and also can cut to any small size you want..
【High Quality Material】High strength and heat resistance (up to 240°C) allows the 3D Printer surface to perform consistently in high temperature environments. The durability is similar PEI sheet but the price is much affordable than PEI. This hot bed sheet is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print. And this 3d build plate is also inherently flame resistant and low in smoke production..
【Easy to Install and Remove】Thick 1mm building plates will not warp or bend under heat. It is used on top of your heated print bed and provides excellent results. Simply remove the 3M adhesive paper on back side then stick it on your heat bed. Or fix it just with clip around the edges. Print directly on....
Authentic Capricorn PTFE Bowden Tubing 1 Meter XS Series for 1.75mm Filament with PTFE Teflon Tube Cutter and Upgraded PC4-M6 and PC4-M10 Pneumatic Fittings with Metal Teeth and 2 Blue Collet Clips
Compatible with Creality 3D printer:Ender-3 all series,Ender-5 all series,Ender-6,CR-10,CR-10S,CR-10 V2,CR-10 V3,CR-10 S4,CR-10 S5.(Other models are....
The Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament..
Pneumatic joint and the circlip has good elasticity and durability. It can be pulled out gently by simply pressing the oval release ring. The most....
One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
The package includes: 1pc imported Teflon tube, 4pcs mold springs, 1pc air cutting tube, 2pcs pneumatic connectors M8, 2pcs pneumatic connectors M6,....
Upgrade 3D Printer Accessories with All Metal Extruder Feeder, Capricorn Bowden Tubing, Pneumatic Couplers, Bed-Level Springs for Creality Ender 3/Ender 3 Pro/Ender 5 Pro/Ender 5 Plus Ender 3 Upgrades
3D Printer Extruder – Instantly provide improved print quality and reduce filament slipping by firmly grasping the filament between two threaded wheels locked together. No more skipped steps when extruding at high speeds or after retractions. Print faster with this superior design, which is able to feed much more filament into the hotend in the same period of time than stock plastic extruders..
100% Original Capricorn XS Bowden Tube for 1.75mm filament – Capricorn ptfe tube is regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead directly to the hotend with as little room for error as possible between the extruder and the hotend. It is rated for withstanding the highest temperature in the market which is perfect for printing filaments such as PLA, PETG, ABS, Nylon. Fits for 1.75mm 3d printer Filament..
Creality Die Springs – Those springs are extra firm and help to hold the bed level for longer while being more resistant against wearing out and loosing compression. Level the bed once and it should hold for more prints with these high performance stiff springs. PC4-M6 & PC4-M10 pneumatic fittings are also included for replacement use on any stock creality hotends..
Wire Length: 45.27-46.85inch /1.15-1.19m. Package includes 5 thermistors..
Note: Not fit for Ender 3 V2/Ender 3 MAX/Ender-3 Max Neo/CR-10S Pro V2/CR-10S Pro/Ender 2 Pro/Ender 6/Prusa i3 3D Printer. Please measure the length of your 3d printer's thermistor and confirm whether this thermistor is compatible with yours before buying..
After-sales Service: If you have any unsolvable problems during using this product, please feel free to contact us. Our after-sales technical team will provide you with detailed solutions within 24 hours..
