NYLL - 18 Inch/ 18' Plug & Play LED Tube – Daylight (6000K) T8 LED Lamp Directly Relamp & Replace 15W Fluorescent Bulbs F15T12, F15T8, FO13/865 (Without rewiring or Modification) - Ballast Required!
Directly relamp and replace the 15 watt fluorescent bulbs F15T12, F15T8, FO13/700, FO13/800 without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
Designed with flexibility in mind, T8 diameter tube lighting fits T8/ T10/ T12 applications as they all use Medium Bi-Pin base, pin spacing 13 mm, end connector.
All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 40% from 15 watts to 9 watts with 990 lumens output.
T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
2-year, warranty does not require registration.
however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
Pair of DDM Tuning Bi Xenon Retrofit Mini H1 Projectors V2 Premium,2.5in W/DDM Slim 55W HID Kit and Mini Gatling Gun Shrouds DDM55W.6000K
Beam Pattern: Perfect light distribution will give plenty of light on the road in front of you. Wider hot spot for a more general beam that will put....
Lens: Optically clear Grade A glass. Only the best lens is used for these projectors. Lens Holder: Make of a high temp nylon / fiber glass composite....
Reflector Bowl: After casting the mold each reflector is polished smooth to remove any imperfections then coated with a high temp chrome coating that....
Mounting: H7 and H4 plates are included at no charge to allow for easier installation. Our threaded collar is 15mm long to limit modification needed....
Kit includes: 2 x H1 V2 Projectors, Mounting Hardware (H7, H4 plates), Gaskets, 2 x HID Ballasts, 2 x HID Bulbs, 2 x Mini Gatling Gun Shrouds.....
NYLL - (4 Pack 4 FT/ 48” Plug & Play LED Tube - Cool White (4100K) T12 LED Directly 40W Relamp Fluorescent Bulb F40/SP41, F40/SPEC41 F40/D41 841 (Without rewiring or Modification) - Ballast Required!
Directly relamp and replace fluorescent bulb F40T10, F40T12, F40/ECO without rewiring or modification. LED lamp is powered by the ballast, which means you can eliminate the need to hire a costly electrician to do any modification. Instant ROI!.
Designed with flexibility in mind, T8 diameter tube lighting fits T10/ T12 applications as they all uses Medium Bi-Pin base or G13 base, pin spacing 13 mm, end connector.
All plastic diffuser and construction for better light distribution, less or no spot reflections. Energy saving of 50% from 40 watts to 20 watts with 2200 lumens output.
T8 LED lamp works with traditional magnetic ballasts and electronic ballasts. It's fully compatible with Instant Start, Programmed Start, Rapid Start ballasts and legacy pre-heat magnetic ballasts.
2-year, warranty does not require registration.
however, each warranty claim is subject to approval and applicable to the original purchaser as identified on the purchase invoice. Please contact us directly for warranty information for this product.
DC 0/1-10V Knob LED Dimmer, Mini Controller Rotary Switch Low Voltage Passive Dimmer PWM Dimming for 0-10V or 1-10V Dimmable Electronic LED Driver, 2packs
Outstanding Features - 0-10v dimmer are used to control various dimmable LED drivers and dimmable electronic ballasts with 0/1-10V dimming signal. The dimming range is 0-100%, which can fully realize 0 V dimming, and can realize the shutdown function with the set 1-10V power supply..
Switch Specifications - Effective dimming signal current: ≤ 40mA.
working temperature: -15-50, triode withstand voltage 180V..
Dimensions and Height - The rgb controller size is 36*23*36mm (plus the twist height), the wire is 0.75*2 national standard wire, the wire diameter is 0.6, the wire length is 35CM, the brown is the positive electrode, and the blue is the negative electrode..
Wide Range of Applications - The dimmer knob can be widely used in downlights, track lights, wall washers, grow lights, electronic LED drivers, electronic ballasts, etc. It is compatible with most LED drivers..
Tips - It is forbidden to place the drive in a place with direct heat source, and it needs to be placed in a well-ventilated place.
if the drive is built-in, sufficient ventilation must be ensured to dissipate heat..
TOPGREENER Occupancy Vacancy PIR Motion Sensor with 0-10V Dimmer Light Switch, 800W Electronic Ballast or LED Driver, Single Pole Low-Voltage Dimmer, TDODS5-010, White
Motion sensor switch with low voltage 0-10 dimming, designed to control electronic ballasts or dimmable LED drivers, it allows you to dim the brightness levels of low voltage lighting.
Motion detection: Passive infrared (PIR) sensor reduces false triggers from unwanted movements and turns lights on when motion is detected. Lights will automatically turn off when the selected time delay expires.
Dimmer gradually brightens and fades lights by holding the top or bottom buttons.
lights turn on to last used brightness level.
Adjustable: Variable time delay from 15 sec (Test) to 30 min, detection range, ambient light level.
Specifications: For use with dimmable electronic fluorescent ballasts or dimmable LED drivers ONLY, neutral wire required, 120-277VAC, 800W max, 1200 sq ft coverage area, single-pole, wall plate not included, UL listed.
D4S D4R LED Headlight Bulbs Conversion Kit Plug and play Double Heat Conducting Copper Tube High Low Beam HID Xenon Replacement 20000Lm 6000k Cold White light Error-free 2 PCS
...light is only suitable for replacing HID D4S D4R..
☀NOTE☀ Since there is a fan at the rear of this LED headlight, it is larger than the original HID, which may cause the original dust cover to be unable to close. If so, please purchase the extended dust cover separately..
☀NOTE☀ Because there are thousands of ballasts on the market, their parameters are different. So there are no plug-and-play versions of LED headlights on the market that are fully compatible with every ballast. （This can be solved by purchasing our LED headlights that do not require a ballast version, ASIN: B091CWJCZP.）.
