Best High Compression Gas

uxcell Pneumatic Air Tubing, 10mm OD x 6.5mm ID 10 Meters 32ft PU Polyurethane Air Compressor Tube Hose Pipe Blue

  • Flexible, has high elasticity to restore memory effect..
  • Compression-resistance (in Usual Temp.): 0.8MPa(8.5kgf/cm2).
  • Package Content: 1 X Pneumatic Air PU Hose.
Check Stock

YSTOOL 8PCS Engine Compression Tester Kit Automotive 300PSI Cylinder Pressure Test Gauge Tool Set for Auto Car Truck Motorcycle Gasoline Petrol Gas Engine Diagnostic with Red Case

  • This cylinder compression tester kit is a professional tool to test the compression in gasoline engine. The readings will help to diagnosis if there are valve sticking, carbon build-up, piston or cylinder head modified, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, etc. Please note, a variation in compression readings between cylinders is often a better indication of engine problems than the absolute values of compression.
  • There are 4 sizes of brass adapters and 2PCS universal push-on connectors in the engine pressure tester kit. The 10mm 12mm 14mm 18mm adapters can be connected to the corresponding size cylinder head. The straight push-on connector and the curved one use rubber cone tip, can be pushed against on the cylinder head, universal for almost all the size cylinder head.
  • The engine cylinder compression test tool kit can be widely used for most type and depth spark plug well. If you have motorcycle car truck ATV mower and any other vehicles with gasoline or gas engine, and you are a professional on repairing vehicles, you can try this kit. Please note, this cylinder compression test gauge is not suitable for most diesel engine, because the range of the gauge is only 0-300PSI, which is much lower than most d....
Check Stock

Elbow Pipe 2 PCS 90 Degree Chimney Stainless Steel Flue for Outdoor Camping Wood Stove Diameter 2.36"

  • MULTIPLE USE SCENARIOS: Suitable for outdoor camping wood stoves chimney, hot tent with stove jack hole, or indoor water heater pipes. The 90-degree bend can be used in areas where space is scarce, or where bending is required..
  • HIGH PROCESS PRECISION: When connecting with other pipes of the same diameter, the connecting joint is tight, and no gas leakage. Be careful not to deform the stove pipe due to compression..
  • STAINLESS STEEL MATERIAL: Stainless steel material is very strong, and not easy to rust. It can also withstand high temperature and acid and alkali corrosion, suitable for use in harsh conditions..
  • PACKAGE AND DIMENSIONS: Include 2 pcs 90° elbows, diameter is 2.36inch/6cm..
Check Stock

FMI 103779-01 NG ODS Milivolt Fireplace Pilot

Check Stock

Dye Dam Paintball Marker Black

  • Switch from a Magazine Fed system to a Loader Fed system with the flip of the On-The-Fly Switch.
  • Semi-Auto, Three Round Burst, and Full Auto Firing Modes.
  • Picatinny Rails and gas-through frame standard.
  • Quick Release bolt system, built in Hyper regulator, clamping feedneck, and competition-style trigger frame..
  • Compression formed hard case, two additional magazines and repair kit included..
Check Stock

Unicornioext 1/8in 1/4in 3/8in 1/2in NPT Female Equal Straight 304 Stainless Steel Needle Valve Water Gas Oil Flow Control

  • A Needle Valve Is Used Usually in Flow Metering Applications Where a Constant Calibrated or Low Flow Rate Should Be Maintained for Some Time. E.G., Idle Fuel Flow in A Carburetor. They Are Very Commonly Used to Provide Shutoff for A Pressure Gauge..
  • This Valve Features a Needle Shaped Handle Which Makes It Easy to Shut Off Even When the Pressures Are High..
  • Constructed Out of High-Quality Lead-Free Brass..
  • For Use on Portable Water, Instrumentation, Hydraulic and Pneumatic Systems. Not Intended for Natural Gas Or LPG..
Check Stock

9TRADING 17.5 CFM 145 PSI TWIN CYLINDER AIR COMPRESSOR V PUMP 5HP - 5.5HP ELECTRIC MOTOR

  • 17.5 CFM 145 PSI TWIN CYLINDER AIR COMPRESSOR V PUMP 5HP - 5.5HP ELECTRIC MOTOR.
  • 5 to 5.5 HP electric motor , Gas motor up to 9hp , Rated pressure: 145 PSI , Pump speed: 655 RPM to 930 RPM.
  • Air Delivery (@ 655 RPM) , 12.1 SCFM @ 40 PSI , 11.5 SCFM @ 90 PSI.
  • Air Delivery (@ 930 RPM) , 17.5 SCFM @ 40 PSI , 15.2 SCFM @ 90 PSI.
  • Flywheel: 14-1/2'' with dual V-groove (A-1600belt). Outlet 1" 16unf. Proven belt driven design for excellent compression & smooth running. Two mufflers with two high efficiency intake filters. Oil viewing window and drain plug. Ball bearing check valve..
Check Stock

Rancho QuickLIFT RS999915 Strut and Coil Spring Assembly

  • COMPLETE SOLUTION -- Levels and lifts late model trucks and SUVs without the cost of complete suspension system.
  • EASY BOLT-ON INSTALLATION -- Complete assembly includes application-specific coil spring and upper mounting plate to simplify installation.
  • LEVELS FRONT SUSPENSION -- Removes factory rake for an aggressive stance.
  • INCREASED GROUND CLEARANCE -- Provides 1-in. to 2.5-in. of additional lift to accommodate up to 35-in. tires for a custom look and increased ground clearance (tire size varies by manufacturer.
  • bumpers, winches, etc. affect lift height).
  • NINE LEVELS OF PERFORMANCE -- Includes RS9000XL strut with nine-position easy-to-adjust knob to allow customized damping control and firmness for on-road and off-road flexibility.
  • BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while long-lasting premium liquid metallic finish ensures long life.
  • REDUCES FADE -- Nitrogen gas pressurized to 100 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming.
Check Stock

Rancho QuickLIFT RS999922 Strut and Coil Spring Assembly

  • COMPLETE SOLUTION -- Levels and lifts late model trucks and SUVs without the cost of complete suspension system.
  • EASY BOLT-ON INSTALLATION -- Complete assembly includes application-specific coil spring and upper mounting plate to simplify installation.
  • LEVELS FRONT SUSPENSION -- Removes factory rake for an aggressive stance.
  • INCREASED GROUND CLEARANCE -- Provides 1-in. to 2.5-in. of additional lift to accommodate up to 35-in. tires for a custom look and increased ground clearance (tire size varies by manufacturer.
  • bumpers, winches, etc. affect lift height).
  • NINE LEVELS OF PERFORMANCE -- Includes RS9000XL strut with nine-position easy-to-adjust knob to allow customized damping control and firmness for on-road and off-road flexibility.
  • BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while long-lasting premium liquid metallic finish ensures long life.
  • REDUCES FADE -- Nitrogen gas pressurized to 100 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming.
Check Stock

Rancho QuickLIFT RS999931 Strut and Coil Spring Assembly

  • COMPLETE SOLUTION -- Levels and lifts late model trucks and SUVs without the cost of complete suspension system.
  • EASY BOLT-ON INSTALLATION -- Complete assembly includes application-specific coil spring and upper mounting plate to simplify installation.
  • LEVELS FRONT SUSPENSION -- Removes factory rake for an aggressive stance.
  • INCREASED GROUND CLEARANCE -- Provides 1-in. to 2.5-in. of additional lift to accommodate up to 35-in. tires for a custom look and increased ground clearance (tire size varies by manufacturer.
  • bumpers, winches, etc. affect lift height).
  • NINE LEVELS OF PERFORMANCE -- Includes RS9000XL strut with nine-position easy-to-adjust knob to allow customized damping control and firmness for on-road and off-road flexibility.
  • BUILT TO LAST -- Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while long-lasting premium liquid metallic finish ensures long life.
  • REDUCES FADE -- Nitrogen gas pressurized to 100 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming.
Check Stock