Best High Frequency Welding Pipe

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

hynade Plasma Cutter, Dual Voltage 115/230V 40A Plasma Cutting Machine, Inverter Metal Plasma Cutter Max Cutting Thickness 12mm (HYC45D 115/230V)

  • ✌ 40A Plasma Cutter, Dual voltage 115/230v High frequency 50/60Hz, 45Amps up Power breaker is suggested. 40Amps cutting current, High frequency arc starting, Quality cutting thickness 6mm, Severance cutting thickness 10mm@65PSI 40A 230V.
  • ✌ Very good to cut car steel (frame), Very light weight and compact design, Adopt Latest IGBT inverter technology, Easy cut stainless steel, Alloy Steel, Mild Steel, 2mm thin Copper, 4mm Aluminum, It is High frequency touch metal arc starting..
  • ✌ Input voltage is 115/230v, Max current is 35Amps under 115V clean cutting thickness 4mm @65PSI 35A 115V. Max 40Amps under 230V, Clean cutting thickness 8mm@65PSI 40A 230V 45A up Power breaker is suggested..
  • ✌ Function, Machine with current LED display, 115/230V power lamp, Current knob, Time for post air can be adjust. Duty cycle 60% in 40A, 100% in 30Amps, Maybe the cutting arc not stable if the air less or over the range. We suggest air pressure 65PSI (0.6Mpa), You can get reading from air gauge which come with machine..
  • ✌ hynade is high level brand at welding field. We focus on welding business more than 20 years. Also we have a service team in American..
Check Stock

4pcs Arrow Welding Magnets -2 pcs 4\ 50 lbs and 2 pcs 5\ 75 lbs Strength Welding Magnets and Clamps Magnetic Welding Holder Metal Working Mig Tools Workshop Welder 45,90,135,180 Degree Angle

  • STRONG POWER: 4 pieces of arrow welding magnets with 2pcs 50lb angle magnets and 2pcs 75lb angle magnets are strong power that can stick solidly to any ferrous metal object and free your hands for easy, secure, and efficient welding works.
  • SAFE & SECURE: The welding magnet and magnetic welding holders can grip the metal and hold it at the angle you need to work safely. Also, the bright red color will help you locate it easily, making your welding job more efficiently and precisely.
  • THREE ANGLES: Heavy-duty arrow design welding square magnet supports metal parts at 45°, 90°, and 135° for easy access. The center hole on the magnets allows the magnet to align itself with the tubing in a self-centering fashion helping you to more easily grab the welding magnet.
  • MULTIPURPOSE: Welding magnets connect parts, freeing up your hands for efficient work and improving work safety, and can also be used as a floater to separate steel plates or used as a double-sided holder for welding, assembly, and marking work to meet your different need.
  • BUILT TO LAST: Constructed of high-quality stainless steel with a powder-coated finish, these welding magnets are durable, long-lasting, and resistant to rust and corrosion. Ideal for being used as a holder and positioner in weld....
Check Stock

LONGEVITY Tigweld 200sx - 200 Amp AC DC Tig/Stick Welder with Digital Display 110v 200v

  • The unit features high frequency start tig and includes a foot pedal for great tig welding control and operation.
  • The stick welder operates on 110v and 220v volts and is capable of welding 7018, 6013, and other stick welding electrodes.
  • With the flip of a swtich, you are able to weld aluminum in AC mode. Features pre-flow, post flow, and clearance effect (balance) function for greater welding control.
  • Great machine for the hobbyist or professional with an easy to use panel. Excellent heat control.
  • Extemely portable weighing 37 lbs and easily carried to any job on site or offsite. The 110v adapter makes it easy to connect to a standard usa outlet..
Check Stock

Carbon Fiber Exhaust Tip 3 Inlet 4 Outlet Red Exhaust Tip 3 inch Car Tailpipe Muffler Tip for 3in Exhaust Pipe

  • 【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3 inch.
  • 【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid....
  • 【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high....
  • 【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
  • 【Warranty】 Tempsnow provide 30-Days warranty. If you have any problems with it or questions, please contact us and we will respond in time. We're....
Check Stock

BEAMNOVA Commercial Grease Trap 25lbs Stainless Steel Interceptor Side Inlet for Restaurant Home Kitchen Tools

  • comes with outlet pipe, user manual & all accessories needed. The welding process is improved for a smoother welding port. Threads are added at the connect hook. Corners are rounded to prevent scratches. The cover inner side is added with a rubber ring to make sure no leakage. Also, the faucet is sealed with the ring..
  • EASY TO INSTALL - BEAMNOVA Grease Traps are delivered fully assembled and couldn't be easier to install. Just connect the pipe run from the sinks and dishwasher to the Grease Trap inlet. Then pipe the Grease Trap outlet directly to the drain. We recommend solvent weld pipe is used for a secure fit. Also, make sure the trap is on the flat floor..
  • HIGH-QUALITY MATERIAL & WORKING EFFICIENCY - Made of heavy-duty 1.2mm thickness 201 stainless steel. Anti-rust, anti-corrosion, non-deformation long service life. Flowing speed up to 13 Gallons Per Minute (G.P.M.).
  • PRACTICAL DESIGN - Overall dimensions: 23.82" x 12" x 11.22"(L*W*H). Locking devices on both sides prevent side leakage of sewage. The faucet switch makes it easier to control the outlet of sewage. The lifting handle at the top allows easy transportation. Please carefully check the specifications of this product before purchasing to ensure tha....
Check Stock

BEAMNOVA Commercial Grease Trap 8lbs Stainless Steel Interceptor Top Inlet for Restaurant Home Kitchen Tools

  • comes with outlet pipe, user manual & all accessories needed. The welding process is improved for a smoother welding port. Threads are added at the connect hook. Corners are rounded to prevent scratches. The cover inner side is added with a rubber ring to make sure no leakage. Also, the faucet is sealed with the ring..
  • OPERATING PRINCIPLE- Grease traps work on the basic principle that FOG's (Fats, oils & grease) float on water and solid particles sink. As the inflow of waste water from the sinks enters the grease trap, the fats, oils, and greases rise to the surface and are trapped between the baffle plates. The baffles on the outlet prevent FOG's from flowing directly through the unit..
  • PRACTICAL DESIGN - Overall dimensions: 13.98" x 10" x 9.45"(L*W*H). Locking devices on both sides prevent side leakage of sewage. The faucet switch makes it easier to control the outlet of sewage. The lifting handle at the top allows easy transportation. Please carefully check the specifications of this product before purchasing to ensure that it complies with your local regulations..
  • EASY TO INSTALL - BEAMNOVA Grease Traps are delivered fully assembled and couldn't be easier to install. Just connect the pipe run from the sink....
Check Stock

Forney 32110 E7014 Welding Rod, 1/8-Inch, 10-Pound

  • All position welding rod with digging arc, deep penetration on dirty, rusty and painted materials.
  • Ideal for joints requiring deep penetration such as square edge butt welds, good for vertical and overhead welding with light slag.
  • Excellent for galvanized steel and rusty/oily steel in maintenance or repair applications, plus pipe welding.
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS,2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

LTI 2.75 inch Butt Joint Exhaust Band Clamp 304 Stainless Steel for 2.75 OD to 2.75 OD Exhaust Pipe Connection 2.75 Inch

  • LTI 3" Length exhaust clamp is Made in Full 304 Stainless Steel Over 100 hours salt spray test to ensure the great performance in anti-corrosion.
  • Universal fitment Butt Joins 2.75" OD Pipe to 2.75" OD Pipe, we also provide many different sizes to fulfill your needs. Full clamping area to create....
  • The butt joint clamps are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back....
  • No welding design makes lap joint clamp fast, easy and accurate installation. it is removable and reusable, easy to install without welding.
  • LTI provide 12 months warranty from the date of purchased. We value your shopping experience and strive to offer a high-quality product and service.....
Check Stock