1200W High Power DC to DC Boost Converter, PEMENOL DC 10-36V to 12-80V Boost Module Step-up Transformer, Adjustable Charging Power Supply for Electric Vehicles and Solar Power
★High Power DC to DC Boost Converter: This module with a function of constant voltage and constant current. It can be used to provide charge for electronic devices. Suitable for voltage stabilization of solar panels, charging of batteries, lithium batteries, etc.
★Wide Input Voltage and Output Voltage: Input voltage: 10-36V.
output voltage:12-80V. The output current can be adjusted(Max 20A). ultra-low input and output voltage difference. When the current > 18A, please strengthen the heat dissipation.
★With Overcurrent and Short Circuit Protection : Double short-circuit protection (input 20A fuse).
with output anti-reverse flood protection, no need to add anti-reverse diode when charging.Note: There is no reverse connection protection, if you have this need, please connect a diode in series with the input.
★Large Heat Sink: Large heat sink design (85mm*62mm*64mm), and it has been processed with black oxidation (black oxidation has better heat dissipation). Which can prolong the service life of the module and make the conversion efficiency of the module higher.
★Widely Application: High-power LED constant current drive, Lithium battery charging, Ni-Cd or Ni-MH battery charging, Solar panels, Wind Turbines, and so on.
[2 Pack] DC-DC 5A Buck Converter 4-38V to 1.25-36V Step-Down Voltage Regulator High Power Module with LED Display
【High Precision】The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects..
【Input Voltage】DC 4V to 38V (input voltage must be 1.5V higher than the output voltage, no boost)..
【Output Voltage】DC 1.25V to 36V voltage is continuously adjustable, maximum output current is 5A..
【Mini Size】62*38*14 mm (with potentiometer). 2 sets included..
【Easy to DIY】Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V).
Valefod 10 Pack DC to DC High Efficiency Voltage Regulator 3.2-35V to 1.25-30V Buck Converter DIY Power Supply Step-Down Module
【High Precision】The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can effectively filter out high frequency noise. Suitable for various electronic projects..
【Input Voltage】DC 3.2V to 35V (input voltage must be 1.5V higher than the output voltage, no boost)..
【Output Voltage】DC 1.25V to 30V voltage is continuously adjustable, maximum output current is 3A..
【Easy to DIY】Connect to power source, using a mini screwdriver to increase or decrease output voltage by adjusting the screw on the blue potentiometer and monitor voltage with multimeter to get the needed voltage, clockwise to step up voltage and counterclockwise to step-down voltage. (Factory default stays a high voltage, you need to contrarotate about 7-15 circles before the voltage starts ramping down, 1 circle means +/- 1V).
Onyehn 2pcs LTC1871 DC-DC Boost Step-up Voltage Converter Module 100W High Power Adjustable Output 3.5-35V Power Regulator Board with LED Voltage Meter
No user/operator instructions or data sheets.Find the download data by yourself, please make sure you consider whether you know the operation before buying. Size: 68x42x14mm, LTC1871 IC with External MOSFET..
Conversion Efficiency: Up to 96%. Low input voltage or a large difference between input and output voltage will degrade the current capacity and efficiency..
Boost voltage to a stable regulated output. Useful for a wide range of applications, such as powering 5V USB devices from a 3.7V lithium cell, powering higher powered electronics from a 12V battery, and a wide range of automotive and electronic projects. Constant voltage regulation, not for raw LEDs..
Button to switch measurement of the input or output voltage, and LED indicates the current measurement of the input or output voltage.
The nixie tube can be turned off by another button. Mentioned states are able to be memorized, is not lost even if the power is disconnected. (On-board marked "IN" LED is turned on, the nixie tube display input voltage value, "OUT" LED bright display is the output voltage value)..
Output voltage must be greater than input voltage, do not apply reverse polarity voltage, voltmeter works only when input is >= 4V..
Dorhea 7PCS LM2596 DC to DC Buck Converter Voltage Regulator 3.0-40V to 1.5-35V Buck Converter DIY Adjustable Power Supply Step Down Module
The buck converter consists of 36u thickened circuit boards, high-Q inductance with output LED indicator, and superior solid-state capacitors that can....
DC 3V to 40V (input voltage must be 1.5V higher than the output voltage, no boost)..
DC 1.5V to 35V voltage is continuously adjustable, maximum output current is 3A..
The LM2596 buck module input and output interface can not be reversed. The input voltage must be higher than the output voltage..
Steps: connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed....
DC Voltage Reducer Converter, DC 24V to 12V 5A Buck Converter, Automatic Car Step Down Up Voltage Regulator, Transformer Waterproof Module
High-quality material: Encapsulated with high-quality die-cast aluminum material shell, with good heat dissipation function, with silicone potting at the back, waterproof, dust-proof, shock-resistant, safe and reliable..
Power conversion efficiency: Using synchronous rectification technology and built-in smart chip, the voltage converter provides over/under voltage input, over temperature, short circuit, reverse input, waterproof, low voltage comprehensive protection..
Widely used: The output power is 60w, which is widely used in motors, driving recorders, car trucks, vehicles, golf carts, LED light strips, electric fans, cameras, lights, screens, monitoring systems, solar panels and DIY, etc..
AITRIP 2PCS DC 400W 15A Step-up Boost Converter Constant Current Power Supply LED Driver 8.5-50V to 10-60V Voltage Charger Step Up Module for Electric Equipment and Digital Products
This is a great 400W DC to DC step-up power supply module for electric equipment, digital products, laptop, etc..
DC 8.5V to 50V input voltage, 10V to 60V continuously adjustable output voltage, 15A maximum input current, 12A maximum output current.
High efficiency, the maximum conversion efficiency can be 96% and efficiency is related to input/output voltage, current and voltage difference..
widely used for electric equipment, digital products, laptop and more. It can also be used as a driver for high power LED lights or voltage regulator for solar panels.
Input and output are designed with screw terminals for convenient wire connection and disconnection..
Songhe LM2596S LM2596 with LED Display Voltmeter Buck Converter DC-DC 4.0-40V to 1.25-37V 2A Voltage Adjustable Board Step Down Module Power Supply Module 5pcs
This module can be applied to fields in the input voltage is higher than the step-down output voltage, such as batteries, power transformers, DIY....
With a voltage meter and voltmeter displays self-calibration. Uses a more advanced microprocessor voltage voltmeter error ± 0.05V, Range 0 ~ 40V. (To....
Touch of a button to switch the input or output voltage measurements and has a light show which is being measured voltages, and save the settings,....
Input Voltage 4.5~ 40V. (Input voltage must be higher than the output voltage of 1.5v or more).
Adjustable output voltage range of 1.25V ~ 37V continuously adjustable. (Input voltage must be higher than the output voltage of 1.5V).
Mini XMOS XU208 USB Digital Interface Coaxial/Optical /12S Audio Adapter DSD256
...on can match the decoder that needs DSD ON signal to decode DSD songs, supporting 44.1K-384KHz/16-32 Bit sampling rate and DOP DSD256 at highest, better signal process brings higher sound quality..
High-quality components are used to ensure better performance, such as ultra-low noise LDO regulated power supply, LVDS differential chip, gold-plated coaxial interface, OS-CON solid capacitors and Panasonic FC filtering and decoupling capacitors, the contact internal resistance is smaller and the data transmission is more reliable..
USB interface can be used as signal input and power input at the same time, and with external DC 5V input (with priority) that can be powered by phone charger or power bank, easy to enjoy HiFi music any time and any where..
Mini size with exquisite design, with PCM and DSD indicator easy to show the output format, black aluminum alloy cases look more cool and fashionable, very suitable for desktop audio device to use..
