Wood Stove Fan Heat Powered Fireplace Fan, Thermoelectric Fan Eco Fans for Wood Burning/Pellet/Log Burner, Enhanced Dual Motor (Include Accessories Magnetic Stove Thermometer)
...dual motors, has faster Speed and Larger Air Volume. The fireplace fan is designed to circulate the warm air created by a logwood/coal/pellet burning. Efficiently circulates warm air throughout the room.
【Heated Powered Stove Fan Non electric】Our Eco fan for wood stove is an Environment-friendly Thermal fan. The thermoelectric module acts as a small generator to power the fan's motor. Improved warm air circulation results in greater warm and reduces wood consumption..
【Quiet Operation】 This stove fan's noise level is less than 25 dB, which gives you a Quiet atmosphere. The stove fan is designed to be used with coal, pellet, or wood-burning stoves.
【Safety and Long Life】Stove operating with normal surface temperatures between 212°F(100°C) and 662°F(350°C). Built-in overheating protection, when the temperature exceeds 662°F(350°C), the metal strip at the bottom will expand and lift the fan to protect the motor.
【Quality Warranty & Free Thermometer】The Package comes with a stove top fan and a free Fireplace accessory -thermometer. please put the fan on the side of the chimney, (leave a space of 15cm behind the fan) so that the fan can blow hot air into the room. If any issues, please reach out to us via amazon or service Mail..
Dual-core Thermoelectric Peltier Cooling System Semiconductor Refrigeration Cooler Kit with Power for Plate Cooling Pet Bed Cooling etc
【Bingo Choice】: Our dual-core thermoelectric peltier cooling system is suitable for small space cooling,semiconductor refrigeration learning theory, research solutions developed cooling equipment planning.
【Wonderful Characters】: This semiconductor refrigeration cooler kit with power has stable working status and low noise, it doesn’t need refrigerant.
【Wide Range of Applications】: This thermoelectric cooler can used for plate cooling, pet bed cooling, test bench, small space cooling.
【Note】: Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, seal ability, etc.
【Extra Usage】: This dual-core cooling system kit can be used as dual-core cooling, air cooling device, cooling equipment.
ZBAITU C80 80W Laser Module Kit, 10W Optical Diode Laser Module for Engraver Cutter, 10W Laser Head for DIY Metal Wood Leather Acrylic Glass, Compatible Most Laser Engraving Cutting Machine, 12V
【Wide Compatibility】The attached adapter cable and dovetail slider can help the ZBAITU C80-EAIR laser module to be compatible with most laser engraving and cutting machines on the market, also compatible with other machines that use 12V input voltage, you don't need to repurchase a laser engraving machine to improve engraving and cutting efficiency, high cost performance.
【Air Assist】ZBAITU C80-EAIR Air assist laser module can blow away scrap and smog during engraving and cutting, boost effect, engraving and cutting more refined, reduces yellow smoky marks on the edges of the cutting line, the most important is to reduce the pollution to the lens to ensure the service life of the laser module.
【High Power】The ZBAITU C80 EAIR laser engraving module has a 10W laser output power, it can quickly engrave metal, wood, leather, glass, and acrylic etc. The C80 EAIR laser cutting machine module is also excellent on cutting function, it can cutting 5mm plywood in one pass.
【Ultra Accuracy】The newest FAC technology compresses the laser point of the ZBAITU C80 EAIR laser module to 0.08mm, the lines for engraving....
Bridge Rectifier, 3Pcs AC to DC Power Conversion Module, 1N4007 Full Bridge Rectifier Filter Power Supply Module for Model Train Railroad LED (Input AC 6V-16V (capacitance 25V1000UF))
AC to DC power converter module, 1N4007 full wave bridge rectifier filter. Module size: 31x14x20mm/1.22x0.55x0.78inch, wire Length: 90mm/3.54inch..
This product is a streamlined rectifier filter module, widely used in small rectifier output filter, mainly used in the power requirements of the electrical is not very high..
The power module design can be put into a smaller small electrical box, the circuit Board above the design of power indicator light, easy to turn on the power supply can be intuitive to know the power status..
Rectified output voltage: output = input x1.414 . Example: input 12V AC, then the output 12x1.414 = 16.968V, which is the calculated result of no-load voltage, only a reference, the actual deviation..
Please NOTE: plug-in products, manual soldering, inconsistent capacitor pin height is a normal phenomenon. AC input voltage [6V-16V] (capacitance 25V1000UF).
AC input voltage [6V-32V] (capacitance 50V470UF), please seclect the one you need..
NOYITO 2-Channel 5V Computer USB Control Switch Relay Module Drive-free relay module Plug and Play Suitable for PC Smart Controller
The module uses HID technology, without any driver, plug and play. Support WIN7,10, XP 32-bit, 64-bit system, easy to use simple..
Onboard square USB interface, stable connection.
use of high-performance USB control chip.
use dedicated relay driver chip ULN2803, relay work more stable.
Power outlet and terminal, two access power mode convenient and flexible. After connecting the power, even if the computer shut down or USB from the computer pull out, the relay can also maintain the set state..
【NOTE: The 1-Channel 2-Channel module does not require an external power supply. 4-Channel 8-Channel modules require an external module power supply. 】PCB size: 56.5mm * 40.6mm, fixed hole size: 3mm, fixed hole center moment: 52.2mm * 36.6mm..
DollaTek 5V ESP8266 Four Channel WiFi Relay IOT Smart Home Cellphone APP Remote Control
On board high quality MCU and ESP-01WIFI module Two working mode : Mode 1:cellphone carry on wifi module directly Mode 2:cellphone and wifi module carry on router together Additional function :work as USB module when disconnect ESP-01 module.
Transmission distance: (1) the open environment, the mobile phone when carrying on the WIFI module maximum transmission distance of 100 m.
(2), when the WiFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal.
Use the Smartconfig technology to complete the configuration of the account and password of the esp-01 WIFI module on the mobile APP. The configured account and password will be memorized after power off.
The board contains 5V,10A/250V AC 10A/30V DC relay, which can continuously absorb 100,000 times, with the protection of diode current and short response time..
With mode option and working statue LED indicator.With 4 isolator and strong anti interference ability.Reserved UART debug interface and MCU download port for program.
Acxico 2 pcs ESP8266 ESP-01S + 5V WiFi Relay Module Smart Home Remote Control Unlock Board
This module uses genuine relays and normally open interfaces. High stability and low power consumption..
Strong driving ability, stable and reliable performance. High efficiency, fine workmanship, and durable..
Add one more ESP-01S module. This smart relay module is based on the ESP-01S WIFI module design. It can be used to DIY your own smart switch. It can be remotely controlled by the mobile phone APP and provides APP and LUA source programs. It's easy to use right away..
12V to 5V Direct Current Converter Buck Module USB Output Power Adapter Direct Current Power Adapter Converter Regulator Car Power Converter (3)
Parameter: these usb buck module input voltage range DC 12V and output voltage default DC 5V, the maximum output current is 3A, no-load current is 10mA and the maximum output power will reach 15W.
USB and high conversion: this DC to DC converter module has USB charging ports, DC to DC buck converter has integrated switch thin regulator module, the conversion rate is as high as 96%.
Intelligent protection: this 12V to 5V DC converter is using intelligent microprocessing chip, over voltage, over current, over temperature and short circuit, it can be auto protection.
Wide application: DC converter module 12V to 5V is widely applied for GPS navigation, driving recorder, electronic dog, car radio, MP3, MP4, walkie talkie, surveillance system, bus display, taxi advertising screen, LCD TV, LED, etc..
Warm prompt: the power of devices must be lower than 15W when using this DC to DC converter 12V to 5V, and not compatible with partial Samsung phones.
