Tool Daily Thermal Release Valve for Pressure Washer Pump, 1/4 Inch NPT, 2-Pack
Fitting: 1/4″ NPT. The outside diameter of male thread is 0.54 inch. Include 2 pieces pressure washer release valve..
Compatible with many brands, such as Generac,Homelite, Karcher, Briggs, Power Stroke, Husky, Black Max, Craftsman, Him Ore and Ridged pressure washers. Replaces Homelite part numbers 678169004, 678169002 and 678169001. Replaces Briggs and Stratton parts 208673GS, 21783GS, 194298GS and B3090GS..
Thermal Relief Valve protects pressure washer pumps operating in a safe temperature range to prevent overheating. When water temperature reaches above 145º F, pump seals may fail. The thermal relief valve will open to release hot water and allow cold water to enter the pump. So it continues to operate at a safe temperature. If the pump have ever overheated, the thermal relief valve must be replaced..
Made of brass. Max. inlet pressure of pumps is 200 PSI..
Quick reply within 10 hours. Any issue or question, please free to contact with us..
Replacement Hose for Above Ground Pools 1.25' Diameter for Models 1,000 GPH, 530 GPH, and 330 GPH,57' Long Filter Pump Hose. (2)
▶ Product introduction: Made of high quality polyethylene material, contains 2 pieces of pool hose leak proof replacement accordion pipes [57″ long, 1.25″ diameter], 4 pieces of 304 stainless steel hose clamps..
▶ Easy to install: plug in, hand tighten, done..
▶ Quality description: The hose is super durable, super pressure resistant, and the hose clamp is rust-proof and corrosion-proof..
✔ Compatibility: Hose is suitable for 28xxx series 330 GPH(601), 530 GPH(603), 1,000 GPH(637) filter pumps, and various sizes of filter pumps with 1.25″ Inlet/outlet..
✖ Note: This product is not suitable for sand filter pumps with 1.5″ diameter screw-in nut connections..
AGPTEK Electric Air Pump Bundle with Rechargeable SUP Air Pump
... supply. To inflatable, just put the inflatable head at the filling hold, then press the switch. To deflate, you should put the inflatable head in the vent hole, then press the switch to deflate. Our electric air mattress pumps are simple to operate..
0-16 PSI SETTING: The pressure unit can be selected among PSI/Bar. The air pressure setting is adjustable, so the pressure unit can be ranged from 0-16 PSI (the highest point is 1.10 Bar). You can set the target liquid in a certain level in case of emergency like supersaturation..
CHARGE MODE: This type of electric high pressure air pump possesses of a built-in 6000mAh-type lithium-ion battery. The volt of electricity is 12V. The pump can be directly powered by cigarette lighter or wall plug adapter. In this way, you can use it wherever you like..
✦ GASOLINE PRESSURE WASHER VERTICAL PUMP ✦✦ PWV(R)25/2.3 ✦✦ High quality replacement pump for your pump. These are OEM replacement pumps for many models of pressure washers. If your old one stopped working, is corroded etc. don’t hesitate!.
✦ 2600-2700 PSI 2.3 GPM RATING ✦ This pumps is rated at 2600-2700 PSI and 2.3 GPM which is great for any and all small house cleaning projects. Very safe pressure even for washing your car or other things without being afraid to damage the paint!.
✦ IMPORTANT FITMENT ✦ This pump comes with a standard 7/8” shaft which is universal for all small pressure washers. Hose connecters are standard M22 so you don’t have to worry about buying extra fittings. Your 5.5-6.5 HP engine will power this pump with no problem and bolt on directly!.
✦ MOUNTING BOLT MEASUREMENT ✦ From main center shaft to each mounting bolt is 4″ – center to center spacing between mounting bolts is: 7 11/16″ – 6 3/16″ – 6 7/16.
✦ PARTS COMPATIBILITY ✦ ✦ THIS IS MADE FOR A VERTICAL ENGINE WITH A 7/8″ SHAFT ✦ Models stated in the listing are potential matches only and NOT a guarantee of compatibility. The customer is responsible for verifying their compatibility (our pump wit....
Lubeworks Oil Transfer Drum Pump Double Action 1:1 Fast High Flow Rate 8.5GPM / 32LPM for SAE130 Oils/Fluids
SPECIFICATIONS - This Air Operated (Pneumatic) Double Action Oil Transfer Pump has a High Flow rate of a Max 8.5GPM / 32LPM.
A Max Air Inlet Pressure of 5-8BAR / 70-115PSI.
A Max Fluid Pressure of 8BAR / 115PSI. An Air Motor Effective Diameter of 63mm 2.5" inch.
An Air Consumption (per minute) @ 8BAR / 130L @ 115PSI / 4.7CFM.
An Air Inlet Connection of 1/4" and Oil Outlet Connection of 3/4" Male.
A Long Pump Life of 960k Liters / 253k+ Gallons.
EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
This Smart design uses fewer parts for less pump wear/tear, making it is easy to use/maintain This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE80 grade oil.
PROPER USE & SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
This pump can be barrel, cart or wall-mounted.
A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
Follow manual for setup and always use the proper additional equi....
Lubeworks Oil Transfer Drum Pump Double Action 3:1 Fast Flow Rate 7.4gpm / 28lpm for SAE130 Oils/Fluids
PUMP SPECS - This Air Operated (Pneumatic) Double Action Oil Transfer Pump has a High Flow rate of a Max 7.4GPM / 28LPM.
A Max Air Inlet Pressure of 5-8BAR / 70-115PSI.
An Air Motor Effective Dia. of 63mm 2.5" inch.
An Air Consumption (per minute) at 8BAR / 140L at 115PSI / 5.0CFM.
Air Inlet Connection of 1/4" inch and Oil Outlet Connection of 3/4" inch Male.
A Long Pump Life of 840k Liters / 221k+ Gallons.
EFFICIENT DESIGN and CAPABILITIES - Our Transfer Pumps are Double Action and Self Priming designed, delivering fast and precise flow rates.
This Smart design uses fewer parts for less pump wear and tear, making it is easy to use and maintain.
This pump is best suited for Multiple Fluid types of medium to high viscosity at a short to medium distance, typical fluids handled include: motor oil, synthetic oil hydraulic, gear oil, automatic transmission fluid and suitable up to SAE130 grade oil.
PROPER USE and SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
This pump can be barrel, cart or wall mounted.
A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
Follow manual for setup and always use the proper add....
Toolwiz 150PCS 15 Sizes Copper Metric Sealing Washers Assortment Set Flat Ring Sump Plug Oil Seal Gasket Sealing Washers Crush Washer Assortment M5/6/7/8/10/10.5/11/12/12.5/14/15/16/16.5/17.5
Material: 100% copper, high conductivity, corrosion resistant copper washer assortment.
150PCS 15 Popular Sizes Sealing Washers Kit, great for sump plugs, water, fuel, and hydraulic fittings.
150 pcs solid copper sump plug washer set. All contained in a compact and see through compartmented plastic case, convenience to use..
Copper Provides a Tighter Seal and Greater Heat Endurance than Steel and Rubber Washers. Max Operation temperature: 350C Max Operation pressure:16MPa Melting point: 1083C.
Widely applied in the flange and the connection of the chemical plant, electricity generating station, nuclear power station, and electronic, digital consumer products, hardware, precision instruments, electrical appliances, bearings, air pumps, water pumps, water valves, air cylinder, sealing the high pressure braking systems.ect..
...e – Controls flow of water in the pump in built filter – helps protect your misting nozzles built in water by pass self-priming.
Nickel-plated brass button series With stainless-steel Orifice Standard 10/24-inch thread 0. 012-inch Orifice Rust-resistant fixed impeller pin 0. 014 GPM Flow per Nozzle.
Maximum inlet pressure: 100 psi Minimum inlet pressure: self- priming. Maximum outlet pressure: 250 psi (depends on line length and numbers of nozzles) maximum flow: 0. 9 GPM full load Amps. 110V AC: 0. 7 amps 12V DC: 4. 0 amps Voltage: 110V-220V AC/ 12V DC (refer manufacturing label on the pump) noise level: 40 dB. Maximum fluid temperature: for room temperature/ cold water applications only.
Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on....
