NEWREACH Thermocouple and Tilt Switch for Outdoor Patio Heater, Dump Switch for Propane Gas Patio Heater Pyramid Style Tower Heater Firesense Heater, Tilt Switch and Thermocouple Sensor Kit for Winter
This thermocouple and tilt switch kit is to fix the problem that the pilot light or flame does NOT stay lit, or the thermocouple is broken..
The safety dump switch will automatically stop the heater when it's tilted or dropped, prevent the occurrence of gas leakage when the fire is extinguished and the gas is still on, which is more secure..
Easy to install, just connect the probe to the ignition device, the thermocouple to the valve, and the other two ports to the safety dumping switch..
Works with propane gas patio heater, outdoor standing patio heater, pyramid-style tower heater, fire sense heater, dome-style heater, tabletop heater, Amazonbasics heater, Hampton Bay patio heater, Lowes patio heater, etc..
Thermocouple wire total 350mm with temperature resistance sleeves, with threaded M8*1 and M6. Suitable for weak dump switches with gas R ≤ 10mΩ. Please check the compatibility before purchasing this product..
Fluke BC-7240 Battery Charger/Eliminator, For 75X Documenting Process Calibrator
Dual infrared and thermocouple thermometer for noncontact or contact temperature measurement in HVAC/R systems and manufacturing, electrical, and industrial environments.
Measures temperature from 40 to Plus-550 degrees C ( 40 to Plus-1022 degrees F) with an accuracy of plus or 1 degree C (plus or 2 degrees F) for the infrared sensor and an accuracy of plus or 2 degrees C (plus or 4 degrees F) or 1 percent of the reading, whichever is greater, for type K thermocouple input.
12:1 infrared distance to spot ratio with laser sighting for pinpointing the measurement area.
Included type K thermocouple pipe probe wrapped in flexible hook and loop fastener with a 20 inch cable takes contact measurements from 0 to 100 degrees C (32 to 212 degrees F).
CE mark indicates compliance with applicable EU directives.
Thermocouple & Tilt Switch for Patio Heater, Thermocouple and Dump Switch Repair Kit for Propane Patio Heater Glass Tube Patio Heater Gas Heater, Thermocouple Replacement for Tower Heater, 2 Pack
Purpose - This patio heater repair kit is to solve problem of pilot light not staying lit and heater not ignited. Problem can usually be fixed by replacing thermocouple and dump switch correctly..
Wide Application - Suitable for thermoelectric gas heater, outdoor propane heater, glass tube patio heater, porch patio heater, standing patio heater, tower heater, Pyramid heater, Hampton Bay heater, etc..
Easy to Replace - Probe is connected to the ignition, thermocouple is connected to the valve, the other two ports are connected to the safety dumping switch. If you are handy, this repair kit can save you a new heater..
Dimension - The thermocouple wire has total length of 350mm with temperature resistance sleeve. It has an M8*1 fixed thread head with end thread nuts that are compatible with 8mm gas valves. 15A weak current safety dump switch for gas R≤10 mΩ. Probe is not threaded. Note: Check your lead lengths before purchasing..
Package included tilt switch X 2pcs, thermocouple X 2pcs..
AT4516 16 Channels Temperature Recorder Meter for Industry with RS232C and USB Interface LCD Display Thermocouple Data Logger -200℃ to 1300℃ thermocouple J/K/T/E/S/N/B
★ Graduation :thermocouple:J/K/T/E/S/N/B.
★ Range :-200ºC~1300ºC(Varying depend on graduation).
★ Resolution: 0.1ºC RS232C and USB Slaver Interface TFT True Color LCD Display.
128 channels are available Speed :Fast: 100ms/channel Medium: 500ms/channel Low: 1s/channel.
Fluke 53-2 Single Input Digital Thermometer with USB Recording, 3 AA Battery, -418 to 3212 Degree F Range, 60 Hz Noise Rejection
Thermocouple thermometer for use in applications requiring a broad range of temperatures, including furnaces, kilns, freezers, and other industrial applications.
Measures temperatures in Celsius, Fahrenheit, or Kelvin via a Type K, Type J, Type T, Type E, Type N, Type R, or Type S thermocouple probe.
Includes a Type K bead thermocouple probe with a 40" cable that measures from -40 to +260 degrees C (-40 to +500 degrees F).
Stores up to 500 points of data for analysis and monitoring.
Conforms to NIST standards for compliance with regulations.
DRELD Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit with 5/8” -18UNF Inlet Outlet Thermocouple Knob Switch, Fits for Gas Grill, Heater, Fire Pit
SIZE: 750 mm thermocouple with M8*1 threaded head. Bakelite knob OD 38mm, D shaft 6.1mm..
APPLICATION: The kit is suitable for low pressure repair control system for Gas Grill, Heater, Fire Pit, & Fireplace..
MATERIAL: The fire pit gas control valve kit is made of brass and plastic for durable use. Not OEM but fits OEM Standards..
HOW TO USE: Fix the valve on a plate or board of your grill or fire pit by the head screw and flange. Connect your inlet and outlet hose on inlet and outlet side. Fix the thermocouple nut M8 on the valve end tightly. Connect thermocouple and end thread well. Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough. Release your hand and it works properly. If the gas valve shut off again when you release hand, then please check..
AFTER SALES SERVICE: The Propane Fire Pit Kit Replacement Part completed with a One-year Warranty. Should be there any question, please feel free to contact us..
Aupoko Universal Thermocouple Patio Heater Parts, 350 mm Outdoor Heater Replacement Parts M8 x 1 End Connection Nuts Thermocouple 0.4 Meters Length M6 x 0.75 Head Thread 4.8 mm/ 0.19'' Flat Terminal
APPLICATION: This 350 mm thermcouple is suitable for patio heater..
PREMIUM QUALITY: High standard solid copper and brass material, high temperature resistance protection sleeve..
EASY INSTALLATION: You only need less than 10s to open the valve and don't need special tools for it..
HIGH TEMPERATURE RESISTANCE: The patio heater thermcouple is high temperature resistance with protection sleeve..
SIZE: Universal thermocouple with M6x0.75 thread on head, M8 x 1 end connection nuts thermocouple, total extend length 350 mm, with 4.8 mm/ 0.19'' flat terminal..
Non-Contact Infrared IR Thermometer (Range: -58 to 1112°F (-50 to 600°C)) for Process Monitoring, Preventive Maintenance, Electrical Applications, Quality Assurance| Model: Extech IR267
Displays Ambient (Air) Temperature and noncontact InfraRed or Type K thermocouple readings simultaneously | 12:1 distance to target ratio | Built-in laser pointer identifies target area | Adjustable emissivity for better accuracy on variety of surfaces.
Programmable high/low alarm alerts | MAX/MIN/ AVG/DIF function displays maximum, minimum, average, and MAX minus MIN values | Automatic Data Hold when trigger released.
Auto power off approx 10 seconds after trigger is released | Complete with 9V battery and general purpose Type K bead wire probe | Temperature IR: -58 to 1112°F (-50 to 600°C) | Ambient Temperature: -4 to 158°F (-20 to 70°C) | Temperature Type K: -58 to 1832°F (-50 to 1000°C).
Basic Accuracy: ±2% of reading or ±4°F/2°C | Resolution 0.1°F/°C | Distance to Target: 12:1 | Emissivity: 0.05 to 1.00 (adjustable) | Dimensions: 153x120x42mm | Weight: 145g.
Supply Scope: 1 unit of Extech IR267 with Instruction manual | Application: Process Monitoring, Preventive Maintenance, Electrical Applications, Quality Assurance,etc..
