Best High Temperature Fittings

GasOne Propane Orifice Connector Brass Tube Fitting 3/8' Flare x 1/8' Mnpt or Male Pipe by Gas One

  • ✓ FITTING SIZES - 3/8 flare MNPT x 1/8 MNPT.
  • ✓ UNIVERSAL - This orifice can be for pipe fittings, grill, propane burner, propane heaters and all propane appliances that share the fittings.
  • ✓ EXTRA LONG MNPT - We have added extra threads on to 1/8 mint to fit majority of the propane appliances that uses 1/8 mint fitting to ensure frustration free installation.
  • ✓ HIGH GRADE BRASS - Brass for corrosion resistance and durability again temperature changes and low magnetic permeability.
  • ✓ NOTE - Not for potable water appliances.
Check Stock

Orbit DripMaster 65199 Flag Dripper, 1-Gallon Per Hour, 10-Pack

  • SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing)..
  • PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur..
  • DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE..
  • ECO FRIENDLY: Provide water directly where you need it without any overspray!.
  • EASY TO INSTALL: Install emitters directly into the 1/2 main line or branch off with 1/4 inch tubing and connect fittings to the ends!.
Check Stock

Loctite 555336 Copper Anti-Seize Lubricant Brush Top, 8-oz.

  • A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist.
  • Typical applications include spark plug threads installed in aluminum, exhaust manifold bolts, engine, bolts, thermostat housing, fuel filter fittings, oxygen sensors and battery cable connections.
Check Stock

SharkBite 1/2 Inch x 100 Feet White PEX-B, PEX Pipe Flexible Water Tubing for Plumbing, U860W100

  • PEX TUBING: Flexible water pipe tubing for potable water distribution systems.
  • minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant.
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections.
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
  • PEX hose is great for repairs, and easy to cut with SharkBite shears.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA.
Check Stock

SharkBite 1 Inch x 100 Feet Orange PEX Pipe, Oxygen Barrier Flexible Water Tubing for Radiant Heating, U880O100

  • PEX RADIANT TUBING: Flexible oxygen barrier pipe tubing for radiant floor and hydronic heating applications.
  • minimum working temperature 33 degrees Fahrenheit at 160 PSI and maximum working temperature 200 degrees Fahrenheit at 80 PSI.
  • FLEXIBLE PEX PIPE: Line expands and contracts with temperature changes and is freeze resistant.
  • PUSH-TO-CONNECT: Use with SharkBite push-to-connect plumbing fittings or brass barb fittings using PEX crimp tool or clamp connections.
  • PREFERRED BY THE PRO: All SharkBite PEX tubing meets the same standards for commercial and residential plumbing applications.
  • PEX hose is great for repairs, and easy to cut with SharkBite shears.
  • MADE IN THE USA: All SharkBite connectors, adapters, and piping are manufactured and tested in the USA.
Check Stock

Fuel Line Kit 3/8\ 6AN 20FT Fuel Hose Nylon Stainless Braided CPE Oil Fuel Injection Line Fitting Kit Universal

  • ... The Black Braided Steel Fuel Hose made of Nylon and Stainless Steel Braided + CPE Synthetic Rubber.
  • The hose end AN fittings is made of high strength T6061 Aluminum, polished and anodized surface provide the bright appearance, corrosion protection and strong strength.
  • Safety Features: The 6an push lock hose working temperature range: -40℉ to 350℉ (-40℃ to 176℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Braided gas line Inner diameter: 0.34 inch, outside diameter: 0.56inch. Please measure before purchase.
  • No Worry To Buy: Excellently Sealed, no leaking. We offer 3-month after-sale service for the 6an 3/8 fuel hose fittings kit. Any problem you have, contact us directly by amazon message. Please Noted: Professional installation and Adjustable AN Wrench is highly recommended.
Check Stock

24 PACK 3 Way PVC Elbow Fittings 3/4 Inch White, 3 way PVC Pipe Connectors, Pipe Fittings, Corner Fitting, for Building PVC Furniture Greenhouse Shed Pipe Fittings Tent Connection

  • PVC MATERIAL - 3 Way PVC Elbow Fittings are made of high quality PVC material. With the feature of Low-Temperature-Resistant, Impact-Resistance, Ultraviolet-Resistance, Rust-Resistance.
  • IDEAL FOR CONNECTION- 3-way pipe fittings are ideal for center connections! Structural grade pvc has tapered edges and a beautiful glossy surface.
  • EAST TO INSTALL- The 3/4” pipe can be rotated and twisted into the 3 way pipe fitting during installation.
  • The deep sleeve allows the pipe to be inserted further into the joint in order to have a safer and more secure hold.
  • WIDE APPLICATION- Perfect for building greenhouse shed pipe fittings, tent connection, dog bed, hoop houses and so on.
  • GUARANTEE- Lifetime warranty for 100% money back or replacement, if you have any questions, please feel free to contact us.
Check Stock

LUMAX LX-1174 Push-Type Grease Gun (3 Oz). One-Hand Operation. Compact Manual Grease Gun get Grease into Tight Spaces. Transparent Body for Visual Control of Fill Level.

  • One-hand Operation. Compact Grease Gun get grease into tight spaces.
  • All-purpose Nozzle for Hydraulic & Ball-head Grease Fittings and Pointed Nozzle for Cup-shaped Grease Fittings.
  • High-quality, Shock-resistant Plastic.  Withstands changes in Temperature.
  • Transparent Body for Visual Control of Fill Level.
  • Suitable for High Viscosity Oils and Greases of up to Medium Consistency (NLGI #2).
Check Stock

Brass Compression Tube Fitting, Union Assortment Kits, 1/8\ 3/16\ 1/4\ 5/16\ 3/8\ OD (5pcs)

  • Three piece construction - nut, sleeve and body with attached insert.Easy to disassemble no flaring tool required..
  • Use with copper, brass, aluminum, or plastic tubing. -65 Degree F to +250 degree F temperature range. Standard fittings use short nuts..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

2-Pack Besosay Brass Reducer Hex Bushing Threaded Pipe Fitting 1 Inch NPT Male x 3/4 Inch NPT Female Adapter

  • ✅ SPECIFICATION - Standard brass pipe fitting 1" NPT male to 3/4" NPT female reducer adapter. For connecting pipes with different ends size..
  • ✅ MATERIAL - This brass reducer bushing adapter is made of high quality brass for corrosion resistance, high temperature ductility and low magnetic....
  • ✅ EASY INSTALLATION - The deep threads design allows the fittings to be better engaged with the object to enhance fixation, and the smooth threads....
  • ✅ OPERATION PRESSURE & TEMPERATURE - Max. Pressure: 150 PSI ,Temperature range：-65 to 250 F..
  • ✅ PLEASE TAKE NOTICE - This pipe fitting can not be installed for potable water use. And, NPT thread size does not actual diameter, it is only....
Check Stock