Best High Voltage Vfd

CNC Spindle Motor Kits,220V 1.5KW ER11 Square Air Cooled Spindle Motor CNC Spindle CNC Motor + 220V 1.5KW VFD + Collets Set ER11+ Wires + Drill Bits+Wrenches for CNC Router Machine

  • 【Package list】 :1pcs 220V ER11 1.5KW Square air cooled spindle motor +1pcs 220V 1.5KW VFD +13pcs Collet ER11(1mm-7mm) + 10pcs Drill Bits(0.8-3mm,....
  • 【Easy and fast to assemble 】: Our VFD has been pre-setting up, the spindle is with 8 hole installing holes, we offer complete accessories that....
  • 【Longer working life】: There are Authentic 4pcs steel bearings comparing with 3 bearings of other suppliers, significantly extend working life 3....
  • 【High precision】:We make further processing for high accuracy & concentricity, the runout off of our spindle motor is less than 0.005mm that 10....
  • 【Warranty assurance】:We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing....
Check Stock

CNC Spindle CNC Motor 220V 7.5KW 7500W Square Air Cooled Spindle Motor 4 Bearings ER32 18000RPM 300HZ for CNC Router Machine

  • 【BASIC INFORMATION】-This spindle motor should work with 220v,300HZ vfd . 2 Poles, Collet ER32-6mm,Voltage: 220V ,Power: 7.5KW, Frequency: 300 Hz,....
  • 【EASY AND FAST TO ASSEMBLE 】-We offer pre-soldered aviation wire , The appearance design of square spindle motor have 2 sides mounting holes to....
  • 【SPINDLE ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • 【WIDE APPLICATION】-Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass,....
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing....
Check Stock

Galapagoz Drill Paddle Water Cordless Kayak Canoe Boat Raft Light Weight Trolling Motor Fishing USA

  • 【PACKAGE INCLUDE】-1pcs 110V 2.2KW air Cooled Spindle Motor +1pcs 110V 2.2KW VFD inverter+ 1pcs Φ80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm) +10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire+power wire+2pcs wrenches.
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
  • Runout off less than 0.005mm that 10 times precision beyond normal spindle motor..
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running..
  • 【APPLICATION】-Wood/ Copper/Brass/Aluminum/PVC/Plastic/ carving/engraving machine, advertisement engraving machine,CNC router machine, small sized processing center, high speed centrifuge etc..
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved..
Check Stock

CNC Router Engraver 4 Axis USB 1.5KW VFD 6040 CNC Engraving Drilling Milling Carving Machine 3D Cutter Desktop DIY Artwork Woodworking With Remote Controller

  • 【ENGRAVER MACHINE PARAMETERS】(Note: When you receive this machine, please contact us to send you the Operation Video and Mach3 Software.] X Y Z....
  • 【CONTROL BOX PARAMETERS】Operating Voltage: AC 110V.
  • Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive.
  • 【PREMIUM MACHINE】The 1.5KW water-cooled VFD is available operating for long time,which can reinforced the processing abilty of the machine and can....
  • 【CAN CONNECT WITH COMPUTER】The mini router frame is movable. The machine can connect with computer as other external device such as printer ,....
  • 【WORK WITH VARIOUS MATERIALS】This Engraving machine can work with various materials(metallic & non-metallic), such as: wood, pmma or other....
Check Stock

Zhong Hua Jiang Spindle Motor Air Cooled Spindle 110V 2.2KW 2200W 4 Bearings 24000RPM 400HZ CNC Motor for CNC Router milling Machines Factory Direct Sales

  • 【TECHNICAL PARAMETERS】-3HP, 2 Poles, Collet ER20(compatible with bits between 1/25" and 1/2" ),Diameter: Φ80mm,Voltage: 110V ,Power: 2.2 KW,....
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • 【EASY AND FAST TO INSTALL 】-We offer pre-soldered wire with aviation connector, it will take just 3 minutes to connect spindle motor to VFD..
  • 【APPLICATION】:Wood/ PVC/PCB/PMMA/Plastic/Aluminum carving/engraving machine, advertisement engraving machine,CNC router machine, small sized....
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied....
Check Stock

Fluke 1587 FC 2-in-1 Insulation Multimeter, True-RMS, Selectable Insulation Test Voltages Up To 1000 V, Pi/DAR Timed Ratio Tests, Measures Frequency, Includes Low-Pass Filter For Motor Drive VFD

  • PI (polarity index) /DAR (dielectric absorption ratio) with Trend It graphs identifies problems faster.
  • Memory storage through mobile Fluke Connect Measurements App eliminates writing down results, reduces errors and saves data for historical tracking over time.
  • Temperature Compensation through App helps establish accurate baselines and relevant historical comparisons.
  • VFD low pass filter for accurate motor drive measurements.
  • Includes auto discharge of capacitive voltage for added user protection.
  • Insulation test voltages 50 V, 100 V, 250 V, 500 V, 1000 V.
Check Stock

CNC Spindle CNC Motor 110V 1.5KW Air Cooled Spindle Motor 65mm 4 Bearings 24000RPM 400HZ for CNC Router Machine

  • 【BASIC INFORMATION】-This spindle motor should work with VFD 110V,400HZ. 2 Poles, Collet ER11-6mm(compatible with bits between 1mm and 7mm....
  • 【SPINDLE ADVANTAGE 】-It made less noise when working, Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than....
  • 【EASY AND FAST TO ASSEMBLE 】-We offer pre-soldered aviation wire , You will take 2 minutes to connect spindle motor with VFD..
  • 【WIDE APPLICATION】-Kinds of engraving and drilling material :Kinds of drilling and engraving materials , such as plastics, soft aluminum,brass,....
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing....
Check Stock

DNYSYSJ 1500W CNC Router Engraver Machine, 6040 3Axis USB Engraving Drilling Milling Carving Machine 3D Carving Desktop Machine DIY Artwork Woodworking

  • ...engrave them into 3D/2D works etc. The machine can connect with computer as other external device such as printer, scanner. With the assist of the ROUTER 6040T, your design idea will be real-time display..
  • ★【Water cooled spindle motor】It can work longer time than air cooled motor.Water cooled spindle motor has higher stability and better concentricity than air cooled motor,water cooling spindle works more stable and durable.(tips:1. The spindle motor must connect with the VFD.)The mini router Frame is movable..
  • ★【It can used for engraving】Advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin doublecolor plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc..
  • ★【Wide Range of Applications】This 6040 machine is suitable for industry, Technology Research, Advertising Design, Arts Creation, Teaching, Student Project and Hobby Purposes. Suitable for PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper..
  • ★【The NEW 1.5KW water-cooled VFD】 It is available operating for long time, which can reinforced the processing abilty of the machine and can be used toprocess alumin....
Check Stock

4 Channel Pre Amplifier Receiver - 1000 Watt Rack Mount Bluetooth Home Theater-Stereo Surround Sound Preamp Receiver W/Audio/Video System, CD/DVD Player, AM/FM Radio, MP3/USB Reader - Pyle PD1000BT

  • 1000 WATT POWER: The high powered Pyle stereo amplifier receiver is perfect for your karaoke/home entertainment sound system. It gives you 1000W peak power to be used for multi speakers with 8 ohms impedance allowing you to enjoy high-quality audio.
  • 7 INPUTS: The home stereo amplifier receiver is equipped with a front-loading CD/DVD player, MP3/USB flash drive reader, Aux (3.5mm) input, (2) pair RCA audio in, (2) 1/4" microphone in, 1/4" headphone jack. It also has RCA output for subwoofer.
  • COMPATIBLE WITH BLUETOOTH: This 4 channel Pyle stereo receiver preamp system is compatible w/ bluetooth for wireless music streaming & works w/ iPhone, android mobile phone, iPad, tablet, & PC. It also has an AM/FM radio w/ 30 station memory presets.
  • EQ CONTROLS: Home theater preamplifier receiver allows you to adjust the mic echo, treble, bass, volume, subwoofer levels using the button and rotary tuner on the front panel control center or the included remote control for distant audio adjustments.
  • DIGITAL VFD DISPLAY: The rack-mount preamp receiver features a built-in digital VFD display which displays all the functions and input used. Includes remote control, detachable rack-mount brackets, RCA connection cables, AM/FM antennas, power cable.
Check Stock

110V 2.2kw vfd Spindle Package:110V 2.2KW VFD+110V 2.2KW Φ80mm ER20 Water Cooled Spindle Motor+110V Water Pump+80mm Clamp +5m Water Pipe

  • 【Connection way】The package only supports 110VAC(+/-10%) single phase voltage input, the input wire is connected to the R and S terminals of the....
  • 【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product.
  • 【Package Include】1 x 110V-2.2KW VFD, 1 x 2.2KW Φ80mm 24000RPM ER20 Spindle .1 x 110V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe..
  • 【Wide range of applications】The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized....
  • 【Warranty】1 Year replace(The spindle is half a year). Spindle Warranty :Half a year If there is an alarm in the product and you do not know how to....
Check Stock