Cross Country Pimping 3 (feat. Mike Maroy & Sir-C) [Explicit]
▼The Most High-Tech LED Reverse/Backup Light Bulbs! Uniform Beam Pattern, High Power 54SMD 3014 & 3SMD 3030 Chipsets. BRIGHTEST LED BULBS. BEST BEAM PATTERN..
▼The AUXLIGHT LED bulbs was made in the highest quality and most stable design, extra longer working hours. Best LED interior bulbs on the market..
▼Standard 1156/1141 base, it almost the same size with halogen bulbs. Super bright LED interior light, +320% BRIGHTER THAN STOCK BULB. ONE Year Warranty..
▼Full aluminum housing with projection lens for maximum light output and better heat distribution, built in constant current IC for longer life span & low power consumption..
▼Fit in most 1156 1003 1141 7506 1073 1073LL 1095 1141LL 1156A 1156ALL 1156LL 1156NA 1156ST 1159 1195 12088 1295 1295NA 199 2396 3497 3497LL 63 631 631LL 7506L 7506LL 7506ST 7533 93 93LL 97 97A 97LL 97NA BA15S etc socket. Can be used for back up/reverse lights, brake/tail lights, turn signal/parking or daytime running Lights, blinker lights, side marker lights, DRL etc. (There need load resistor to avoid the turn signal fast blinking/hyper flash or error code on the dashboard for some vehicle).
This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
white is ground andblack is positive(mini side marker lights).
Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 w....
Oyviny Universal Diode Wiring Kit with 4 Diodes for Dinghy Towing, Towed-Vehicle RV Wiring Harness
Trailer Diode Wiring Kit. This universal tow car wiring kit use a diodes system to wire the towed vehicle's brake lights, running lights and turn signal lights to your RV electrical system. Diodes protect both vehicle's electrical system from electrical feedback.
Towed-vehicle wiring harness kit is ideal solution to connecting your vehicle's electrical system to your RV while dinghy towing, allows your car using the existing light system, you don’t need to carry a set of spare magnetic tow lights any more!.
Widely Used. Dinghy trailer wiring harness can be wired to most vehicle, universal kit works with 2-wire(combined system) and 3-wire(separated system) lighting systems. For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn lights. A converter(RM-732) is required if you want to separate it.
Easy to Install. RV dinghy towing wiring comes with step-by-step installation instructions to help easy installation, simply wire the towed vehicle and attached the diodes, wire the motorhome and connect the power cord to the motorhome and towed vehicle.
SEALIGHT 3157 LED Bulb Red, 12V Super Bright LED Tail Lights for 3057 4057 3156 3056 3457, Suit for Brake light, Turn Signal Light (2 Pack)
【10W 250% Brightness】Each 3157 LED Bulb is designed with super bright 3030 LED chip, which effectively provides 10W power output, which is 250% brighter than halogen lamps. 360° omnidirectional lighting, no glare to other drivers, clear and safe..
Suitable for installing brake lights, high-mounted brake lights, led tail lights, turn signals, reversing lights, parking lights, side marker lights, etc..
【Anti-Flicker】LED reversing light is equipped with a built-in smart IC driver to ensure constant current, no radio interference, and no burn out. Canbus free and anti-flicker to prevent error codes and super flicker..
【Working for 10 Years】The bulb adopts aerospace grade alloy housing, which dissipates heat 200% faster than ordinary materials, which ensures that it can work for more than 30,000 hours. The light bulb works 8 hours a day and you can use it for more than 10 years..
【Plug and Play】The bulb length is 1.88” 47.7mm, non-polar, easy to install and remove. The installation can be completed within 5 minutes. (Our product has a 180° rotation angle, and some models are 150°, please check your original bulb).
Tomhasa 3157 led bulb 3157 LED backup lights for trucks, 3156 led bulb reverse light, 3056 4114 4157 4057 3457 3057 LED Bulb Replacement Lamp for Backup Reverse Brake Turn Signal Tail Light, pack of 2
【ULTRA BRIGHT】Tomhasa 3157 led bulbs utilize powerful and high quality 3030SMD led chips on different sides, provide 2600 lumen per bulb, 6500K xenon white, generating 400% brighter output than halogen.
【LONG LIFESPAN】Built with aviation aluminum housing and hollow-carved design for fast heat dissipation, low temperature low consumption, no overheat issue, ensure a long service life.
【AWESOME PATTERN】Tomhasa 3157 led bulb white is designed with almost 1:1 shape and same light emitting point, ensure sufficient illumination brightness and distance, offer more stylish and clean light.
【DIRECTLY FIT】1:1 direct 3157 halogen replacement socket, non-polarity design, no more modifications, just plug and play, you can install these 3157 LED bulbs easily even if you have no experience before.
【MULTI APPLICATION】A 50W 6ohm load resistor might be required when used as brake turn signal lights for few vehicle models. Fit for 3156, 3157, 3056, 3356, 3456, 4156, 3047, 3057, 3155, 3157NA, 3357, 3457, 4057, 4114, 4157 sockets etc. Can be used for backup reverse lights, turn signal lights, blinker lights, brake lights, parking lights, day running lights and etc.
Alla Lighting BAY15D 2057 1157 LED Strobe Brake Lights Bulbs, Pure Red 7528 1154 3496 Flashing Stop Lamps Dual Filament 12V for Cars, Trucks, Motorcycles, Trailers
(Set of 2 BAY15D base 7528/1157 Flashing LED bulbs) Double contact BAY15D 1157 Flashing LED brake light bulbs will strobe at the beginning braking mode for much easier notified and safer stop & then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, SUVs rear-end collision..
LED Chips: 39 pieces high quality,high power with high performance 2835 led chips per 7528/1157 LED strobe brake lights bulbs---360 degree full angle illumination with projector lens design.
Dual filament BAY15D base S8 shape LED strobe bulbs. Used for replacing rear brake stop light, center high mount stop ( 3rd brake ) light, rear turn signal light, etc.Extra load resistors maybe required to avoid the error code or blinking issue..
The length is about 1.9 inch. Cross reference number: 1016, 1034, 1157, 1606, 1662, 2057, 2357, 2397, 3496, 7528, 1034, 1035, 198, 7528L, 94, 1076, BAY15D, 1157LL, 2357LL, 2057LL, 198LL, P21/5W, 7537, and 1154,etc.
One Year Warranty, Color: Brilliant pure red. Voltage: 12V - 24V,built in stable current IC driver for longer lifespan..
Partsam 2Pcs 4.4" Amber 24 LED Turn Signal Brake Parking Side Marker Lights, IP67 Waterproof Amber Lens Aluminum Housing Surface Mount Marker Lights for Trailer Truck Tractor RV
Each marker light built-in 24pcs high power SMD LEDs, Output super bright amber light, Outfitting your truck with this LEDs lights will allow other drivers to see you better at night.
LED marker lights design with 3 wire, red wire is high brightness and function as brake/turn signal light, black wire is low brightness and function as parking/sider marker light, white wire for ground.
Made of aluminum housing and high quality poly-carbonate lens, rustproof and durable, resistant to shock and vibration. IP67 Waterproof, don't worry about rainy and snow day.
Easy installation, Light weight and low-profile design, comes with gasket and mounting screws for surface mount.
LED marker lights serveice as brake turn signal parking side marker, suitable for trucks, trailers, tractors, MPVs, RV and buses or other 12V vehicle.
PSEQT 6'' Rectangle Marker Lights Red LED Side Tail Clearance Pickup Trailer Lights Waterproof with 20 Diodes and High Low Brightness Front Rear Turn Signal Marker Lights
✅【20LED Truck Side Lights】4 x 6'' rectangle side lights uses all-transparent integrated design and has built-in 20pcs LED diodes. Light color: Red.
Working temperature: -40℃ to 75℃. 3-wire connection design, high and low light dual function..
✅【Wide Use】Rectangle Red Side Lights fit for side marker lights, clearance lights, turn signal lights, running Lights, tail Lights, stop turn tail lights, car auxiliary turn signal lights, etc. Widely used for 12V Pickups, Trailers, Trucks, Heavy Trucks, Wrangler, Van, SUV, ATV, UTV, RV, RZR, F350, F450, Caravan, Camper, Motorhome, Boat, Lorry, Bus, etc..
✅【Fully Enclosed Integrated Side Marker Lights】Made of sturdy PMMA material and 5mm LED lamp beads, fully sealed waterproof, moisture-proof and dustproof, can work in various environments such as rain, fog and snow. 20 high spotlight beads output high-brightness red light, low power consumption and energy saving..
✅【Easy to Install】3-wire connection: Black is ground, Red is low brightness as Tail/Running Lights, White is high brightness as Brake/Stop/Turn Lights. Surface mount, fit for front, rear and side of the car. Can be installed anywhere you need, as long as the size is right..
Truck Upfitters LED 3rd Brake Light Replacement compatible with ARE, Leer, ATC, Astro, Jason & Century Camper Shells & Truck Caps. This camper shell brake light has 8 LEDs for maximum visibility!
Ultra Bright 8 LED brake light upgrade compatible with ARE, LEER, ATC, Astro, Jason, or Century Truck Camper Shells. NOT compatible with Snugtop. This camper shell light is a perfect upgrade / replacement for your truck cap brake light. Has more LED lights than most to ensure maximum visbility and redundancy..
MEASURE YOUR EXISTING BRAKE LIGHT TO ENSURE FIT. See pictures with dimensions to ensure this will fit your truck camper shell. Not all brake lights are the same!! This is NOT COMPATIBLE WITH ANY Snugtop parts. This will work as a replacement for most leer truck cap third brake lights, most ARE third brake lights, and most Century, Jason, and ATC brake lights..
Improved Design With Durability In Mind! Completely Sealed and Waterproof Circuit Board Ensures Maximum Life! DOT Compliant. Truck Upfitters designed this truck topper led brake light bar to work with various brands. Some include Leer camper shell parts / Leer truck caps, ARE camper shell / ARE topper parts, Century truck topper parts, ATC camper shell lights, and other camper shell brand truck brake lights..
Discreet Grey Lens for Cleaner Appearance. LEDs Light Up Solid Red..
Small Quick Connect 9mm Plug Fits Through Small Fiberglass Hole In Camper Shell.
