Best High precision Motor Driver

SVS SB-1000 Pro Sealed 12-Inch Subwoofer Bundle with SVS Soundpath Wireless Audio Adapter Full-Range Transmitter/Receiver - Black Ash

  • This bundle includes (1) SVS SB-1000 Pro Sealed 10-Inch Subwoofer and (1) SVS Soundpath Wireless Audio Adapter Full-Range Transmitter/Receiver.
  • 325 Watts RMS and 820+ Watts Peak Power Sledge STA-325D Amplifier combines massive high current output of discrete MOSFETs with Class D efficiency. Boasting vanishingly low distortion, the unique design unleashes nearly limitless on-demand power while maintaining precise driver control..
  • High-Excursion 12-inch SVS Subwoofer Driver features dual ferrite magnet motor assembly with long-throw parabolic surround for extreme excursion that delivers massive output with finesse and accuracy, even at the most intense listening levels..
  • 50MHz Analog Devices Audio DSP renders pinpoint accurate frequency response through advanced in-room tuning and powerful controls, while letting the subwoofer take control of a space with room-filling bass..
  • Wireless Audio Adapter: Easy to install and connect to other products - Place your sub anywhere, expand your placement options - Decrease clutter and tidy up your room..
Check Stock

Engineer DR-55 Low Profile Right Angled Ratchet Screwdriver

  • 14-in-1 Precision Screwdriver/ Nut Driver.
Check Stock

Precision Screwdriver Compatible with Disney Magic Band/Traditional Watch (Precision Screwdriver Only)

  • 14-in-1 Precision Screwdriver/ Nut Driver.
Check Stock

Hyper Tough 50 Piece Drill and Driver Bit Set with Bubble Level in Red Carrying Case

  • [Multifunctional Battery Pack] : 20V 1.5Ah Lithium-ion battery pack with USB output compatible for phone charging and real-time capacity indicator..
  • [15+1 Position Clutch] : 15+1 torque (280 In-lbs) settings provide precise control for driving in/out screws to prevent stripping, and drilling into wood, ceramics, plastics, and even metal with ease. Max torque for drilling into wood 13/16-Inch(20mm) or steel plate 3/8-Inch (10mm)..
  • [Ergonomic Design] : Compact and lightweight design with superior motor minimize fatigue in most daily screwing and drilling tasks, the rubber-covered handle provides a comfortable grip for being breezily operated in one hand..
  • [Efficient Working] : A flexible shaft could be used in some places where driver bits are hard to reach.
  • LED light illuminates dark working areas.
  • Variable speed（0-550RPM）with electric brake function provides precise operation..
  • [What's Included] : 10pcs drill bits, 10pcs driver bits, an extension bar and a magnetic flexible shaft for hard-to-reach places, US-based customer support..
Check Stock

SVS PB-1000 Pro Ported 12-Inch Subwoofer Bundle with SVS SoundPath Subwoofer Isolation System (4-Pack) - Black Ash

  • This bundle includes (1) SVS PB-1000 Pro Ported 12-Inch Subwoofer and (1) SVS SoundPath Subwoofer Isolation System (4-Pack)..
  • 325 Watts RMS and 820+ Watts Peak Power Sledge STA-325D Amplifier combines massive high current output of discrete MOSFETs with Class D efficiency. Boasting vanishingly low distortion, the unique design unleashes nearly limitless on-demand power while maintaining precise driver control..
  • High-Excursion 12-inch SVS Subwoofer Driver features dual ferrite magnet motor assembly with long-throw parabolic surround for extreme excursion that delivers massive output with finesse and accuracy, even at the most intense listening levels..
  • 50MHz Analog Devices Audio DSP renders pinpoint accurate frequency response through advanced in-room tuning and powerful controls, while letting the subwoofer take control of a space with room-filling bass..
  • Isolation System: Affordable and discreet alternative to platforms and risers. - Works with any brand subwoofer which accepts screw-in feet. - Fewer complaints from house occupants and neighbors in apartments and townhouses. - Cleaner and tighter sounding bass with less floor boom and vibration. - Less buzz/rattle from objects in the room..
Check Stock

GeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino

  • 5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface could be connected with Driver Board easily.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
  • Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.
Check Stock

Metabo HPT 18V Cordless Impact Driver, Triple Hammer Technology, Powerful 1, 832 In/Lbs Torque, Variable Speed Trigger, IP56 Compliant, LED Light, Tool Only (WH18DBDL2Q4)

  • IMPACT DRIVER: 18 Volt Impact Driver with Triple Hammer Technology.
  • TECHNOLOGY: Triple Hammer increasing driving speed, beats per minute, torque and decreases vibration.
  • POWER: Produces 1,832 In./lbs of torque, 0-4,000 IPM(Beats per Minute) and up to 2,900 RPM.
  • SPEED SWITCH: 4-Stage electronic speed switch for precision and control.
  • LIGHTWEIGHT: Only 2. 9 lbs and center balanced to reduce fatigue during extended or elevated use.
  • TRIGGER: Responsive variable speed trigger provides complete control during the application.
  • IMPACT MODES: Limited and continuous impact modes for ultimate control.
  • PROTECTION: IP56 certified to add a degree of protection against dust and water exposure.
  • CHUCK: 1/4 In. hex chuck saves time as bits can be changed quickly and easily.
  • MOTOR: Brushless motor technology for more run time, increased power and extended durability.
Check Stock

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock

Kobalt 2-Tool 24-Volt Max Lithium Ion (Li-ion) Cordless Combo Kit

  • DCD791 in the cordless tools combo kit has a DEWALT built brushless motor which delivers up to 57% more run time.
  • DCD791 in the cordless tool set has 3-Mode LED lights with a spotlight mode.
  • DCF887 in the drill/ impact driver combo kit has 3-speed settings for versatility with Precision Drive for added control.
  • DCF887 has 3-speed settings for versatility with Precision Drive for added control.
  • DCS570 uses a 7-1/4-inch blade to provide 2-9/16-inch cutting capacity at 90 degrees.
Check Stock

LONGBIDA Men Biker Jeans Skinny Distressed Ripped Casual Denim Pants Blue,32

  • [Multifunctional Battery Pack] : 20V 1.5Ah Lithium-ion battery pack with USB output compatible for phone charging and real-time capacity indicator..
  • [15+1 Position Clutch] : 15+1 torque (280 In-lbs) settings provide precise control for driving in/out screws to prevent stripping, and drilling into....
  • [Ergonomic Design] : Compact and lightweight design with superior motor minimize fatigue in most daily screwing and drilling tasks, the rubber-covered....
  • [Efficient Working] : A flexible shaft could be used in some places where driver bits are hard to reach.
  • LED light illuminates dark working areas.
  • [What's Included] : 10pcs drill bits, 10pcs driver bits, an extension bar and a magnetic flexible shaft for hard-to-reach places, US-based customer....
Check Stock